The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A semi-supervised convolutional neural network-based method for steel surface defect recognition
Abstract
Abstract Automatic defect recognition is one of the research hotspots in steel production, but most of the current methods focus on supervised learning, which relies on large-scale labeled samples. In some real-world cases, it is difficult to collect and label enough samples for model training, and this might impede the application of most current works. The semi-supervised learning, using both labeled and unlabeled samples for model training, can overcome this problem well. In this paper, a semi-supervised learning method using the convolutional neural network (CNN) is proposed for steel surface defect recognition. The proposed method requires fewer labeled samples, and the unlabeled data can be used to help training. And, the CNN is improved by Pseudo-Label. The experimental results on a benchmark dataset of steel surface defect recognition indicate that the proposed method can achieve good performances with limited labeled data, which achieves an accuracy of 90.7% with 17.53% improvement. Furthermore, the proposed method has been applied to a real-world case from a Chinese steel company, and obtains an accuracy of 86.72% which significantly better than the original method in this workshop.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Self-citationChallenges in representation learning: A report on three machine learning contests
Goodfellow, I. J., Erhan, D., Luc Carrier, P., Courville, A., Mirza, M., Hamner, B., Cukierski, W., Tang, Y., Thaler, D., Lee, D.-H., et al. (2015) · Neural Networks · doi:10.1016/j.neunet.2014.09.005 · Cited by 697
Steel defect classification with Max-Pooling Convolutional Neural Networks
Masci, J., Meier, U., Ciresan, D., Schmidhuber, J., & Fricout, G. (2012) · The 2012 International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2012.6252468 · Cited by 345
Optimization of the recognition of defects in flat steel products with the cost matrices theory
DuPont, F., Odet, C., & Cartont, M. (1997) · NDT & E International · doi:10.1016/s0963-8695(96)00045-x · Cited by 47
Cited by
A review of industrial big data for decision making in intelligent manufacturing
Li, C., Chen, Y., & Shang, Y. (2022) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2021.06.001 · Cited by 325
Recent advances in surface defect inspection of industrial products using deep learning techniques
Zheng, X., Zheng, S., Kong, Y., & Chen, J. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06592-8 · Cited by 287
A Review on Recent Advances in Vision-based Defect Recognition towards Industrial Intelligence
Gao, Y., Li, X., Wang, X. V., Wang, L., & Gao, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.008 · Cited by 253
Self-citationX-SDD: A New Benchmark for Hot Rolled Steel Strip Surface Defects Detection
Feng, X., Gao, X., & Luo, L. (2021) · Symmetry · doi:10.3390/sym13040706 · Cited by 158
Steel Surface Defect Classification Using Deep Residual Neural Network
Konovalenko, I., Maruschak, P., Brezinová, J., Viňáš, J., & Brezina, J. (2020) · Metals · doi:10.3390/met10060846 · Cited by 118
Metadata
- Authors
- Gao, Y., Gao, L., Li, X., & Yan, X.
- Venue
- Robotics and Computer-Integrated Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 61
- Pages
- 101825
- ISSN
- 0736-5845 (ISSN-L)
- OpenAlex
- W2966341653
- Cited by
- 189
- References
- 6
- FWCI
- 18.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A semi-supervised convolutional neural network-based method for steel surface defect recognition. https://app.cochat.ai/papers/10.1016/j.rcim.2019.101825
- The paper
- Gao, Y., Gao, L., Li, X., & Yan, X. (2020). A semi-supervised convolutional neural network-based method for steel surface defect recognition. Robotics and Computer-Integrated Manufacturing. https://doi.org/10.1016/j.rcim.2019.101825
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.