In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard

A review on energy conservation in building applications with thermal storage by latent heat using phase change materials

Khudhair, A. M., & Farid, M. M. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,398

PCM thermal storage in buildings: A state of art

Tyagi, V. V., & Buddhi, D. (2005) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,137

Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook

Zhang, Y., Zhou, G., Lin, K., Zhang, Q., & Di, H. (2006) · Building and Environment · doi:10.1016/j.buildenv.2006.07.023 · Cited by 667

Experimental assessment of a phase change material for wall building use

Kuznik, F., & Virgone, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.01.004 · Cited by 436

Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation

Kuznik, F., Virgone, J., & Roux, J.-J. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2007.01.022 · Cited by 322

Optimization of a phase change material wallboard for building use

Kuznik, F., Virgone, J., & Noel, J. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.10.012 · Cited by 319

Experimental investigation of wallboard containing phase change material: Data for validation of numerical modeling

Kuznik, F., & Virgone, J. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2008.11.022 · Cited by 254

Impact of phase change wall room on indoor thermal environment in winter

Lv, S., Zhu, N., & Guohui, F. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.02.007 · Cited by 234

Thermal Energy Storage: Systems and Applications

Dinçer, İ., & Rosen, M. A. (2010) · doi:10.1002/9780470970751 · Cited by 190

Control aspects of latent heat storage and recovery in concrete

Lee, T., Hawes, D. W., Banu, D., & Feldman, D. G. (2000) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(99)00128-2 · Cited by 167

Review of Development Survey of Phase Change Material Models in Building Applications

Akeiber, H. J., Wahid, M. B. A., Hussen, H. M., & Mohammad, A. T. (2014) · The Scientific World JOURNAL · doi:10.1155/2014/391690 · Cited by 21

A study of solar heat gain variation in building applied photovoltaic buildings and its impact on environment and indoor air quality

Pandiaraj, S., Jaffar, A. A., Muthusamy, S., Panchal, H. N., & Pandiyan, S. (2022) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2022.2096725 · Cited by 21

Thermal energy storage (TES) systems for cooling in residential buildings

Cabeza, L. F., & de Gracia, Á. (2014) · Elsevier eBooks · doi:10.1533/9781782420965.4.549 · Cited by 21

Enhanced thermal energy storage of polyethylene glycol composite with high thermal conductive reaction-bonded BN aerogel

Zhou, Z., Xia, H., Hu, J., & Wang, L. (2024) · Composites Communications · doi:10.1016/j.coco.2024.101965 · Cited by 20

Treatment of natural stones with Phase Change Materials: Experiments and computational approaches

Romero-Sánchez, M. D., Guillem-López, C., López-Buendía, Á. M., Stamatiadou, M., Mandilaras, I. D., Katsourinis, D. I., & Founti, M. A. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.017 · Cited by 20

Thermal Stability Experimental Study on Three Types of Organic Binary Phase Change Materials Applied in Thermal Energy Storage System

Song, M., Liyuan, L., Niu, F., Mao, N., Shengchun, L., & Hu, Y. (2018) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4039702 · Cited by 20

Phase Change Material (PCM) Application in a Modernized Korean Traditional House (Hanok)

Lee, J., & Park, J. (2018) · Sustainability · doi:10.3390/su10040948 · Cited by 21

Preparation and Investigation of NiTi Alloy Phase-Change Heat Storage Asphalt Mixture

Ma, B., Wei, K., Huang, X., Shi, W., Chen, S. S., Hu, Y., & Shi, H. (2020) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0003338 · Cited by 19

Selection and testing of phase change materials in the physical models of buildings for heating and curing of construction elements made of precast concrete

Yu, N., Chen, C., Mahkamov, K., Makhkamova, I., Li, Q., & Ma, J. (2021) · Solar Energy · doi:10.1016/j.solener.2021.08.036 · Cited by 19

Incorporation of phase change materials into building materials and envelopes for thermal comfort and energy optimization: A comprehensive review

Abass, P. J., & Muthulingam, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112106 · Cited by 19

Effect of Composite Shape-Stabilized Phase Change Material on Asphalt Mixture Temperature

Ma, B., Li, J., Wang, X. M., & Xiao, N. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.311-313.2151 · Cited by 19

Impact of a Composite Trombe Wall Incorporating Phase Change Materials on the Thermal Behavior of an Individual House with Low Energy Consumption

Leang, E., Tittelein, P., Zalewski, L., & Lassue, S. (2020) · Energies · doi:10.3390/en13184872 · Cited by 19

Thermal energy storage for renewable heating and cooling systems

Cabeza, L. F., & Oró, E. (2016) · Elsevier eBooks · doi:10.1016/b978-1-78242-213-6.00007-2 · Cited by 20

A correlation of the convective heat transfer coefficient between an air flow and a phase change material plate

de Gracia, Á., David, D., Castell, A., Cabeza, L. F., & Virgone, J. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.11.045 · Cited by 18

Characterizing the performance of a passive solar house with hydronic floor energy capture system – Heating season experiments

Brown, S. G., & Beausoleil-Morrison, I. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111404 · Cited by 17

Physical models to evaluate the performance of impure phase change material dispersed in building materials

KHATTARI, Y., El-Otmany, H., Rhafiki, T. E., Kousksou, T., Ahmed, A., & Ghoulam, E. B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101661 · Cited by 17

Reduction of temperature fluctuation in a South African shack house using phase change material insulation

Ndanduleni, A. U. C., Radebe, T. B., & Huan, Z. (2023) · Building and Environment · doi:10.1016/j.buildenv.2023.110376 · Cited by 16

Study on Road Performance of Phase-Change Temperature-Adjusting Asphalt Mixture

Ma, B., Li, J., Liu, R. W., & Ma, J. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.287-290.978 · Cited by 16

Thermal and electrical performance of a PV module integrated with double layers of water-saturated MEPCM

Ho, C. J., Jou, B.-T., & Lai, C.-M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.166 · Cited by 16

PCM incorporation into a cavity wall as an insulator and phase shifter: Experimental investigations and numerical modeling

Labihi, A., Ouikhalfan, M., Chehouani, H., & Benhamou, B. (2021) · International Journal of Energy Research · doi:10.1002/er.6918 · Cited by 16

Multiscale Modelling Approach Targeting Optimisation of PCM into Constructive Solutions for Overheating Mitigation in Buildings

Figueiredo, A., Vicente, R., Oliveira, R., Rodrigues, F., & Samagaio, A. (2020) · Applied Sciences · doi:10.3390/app10228009 · Cited by 15

Comprehensive review on the impact of building envelopes on indoor thermal comfort in office buildings: Balancing occupant comfort and energy efficiency

Hong, D., Cheng, R., Lei, H., Zhou, X., Yang, L., Feng, C., & Gao, S. (2025) · Building and Environment · doi:10.1016/j.buildenv.2025.114018 · Cited by 14

Synergistic Effect of Two Organogelators for the Creation of Bio-Based, Shape-Stable Phase-Change Materials

Vasilyev, G. B., Koifman, N., Shuster, M., Gishvoliner, M., Cohen, Y., & Zussman, E. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02960 · Cited by 14

Evaluating and optimizing the energy saving benefits of latent heat in phase change materials with new indices

Chen, X.-N., Xu, B. S., Xie, X., & Pei, G. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120479 · Cited by 14

Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building

Zhao, Q., Shi, C., & Yang, L. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106773 · Cited by 13

Comparison of heavy building envelopes and PCM: Impact on indoor temperature peaks and cooling energy use during heat events

Kuczyński, T., Staszczuk, A. K., & Gortych, M. (2025) · Energy · doi:10.1016/j.energy.2025.136213 · Cited by 13

Effect of encapsulation and additives doping on the thermophysical properties of erythritol for thermal energy storage

Wang, Y., Qin, Z., Zhang, T., Zhang, Z., & Li, Y. (2020) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.5134103 · Cited by 13

Phase change materials for buildings’ thermal energy management: an overview

Dora, S., Kuznik, F., & Mini, K. M. (2026) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2026.104521 · Cited by 13

Evaluation of the effect of phase change materials technology on the thermal stability of Cultural Heritage objects

Bernardi, A., Becherini, F., Romero-Sánchez, M. D., López-Buendía, Á. M., Vivarelli, A., Pockelé, L., & Grandi, S. D. (2013) · Journal of Cultural Heritage · doi:10.1016/j.culher.2013.11.002 · Cited by 12

Optimum Operating Temperature Range of Phase Change Materials Used in Cold Storage Applications: A Case Study

Kılıç, G. A., Yalçın, E., & Aydın, A. A. (2019) · Green energy and technology · doi:10.1007/978-3-030-20637-6_35 · Cited by 11

Energy Performance of Integrated Wall and Window Switchable Insulated Systems for Residential Buildings

Carlier, R., Dabbagh, M., & Krarti, M. (2022) · Energies · doi:10.3390/en15031056 · Cited by 11

Passive Study of Energy Efficiency of a Building with PCM on the Roof during Summer in Casablanca

Mourid, A., Alami, M. E., & Najam, M. (2016) · Journal of Power and Energy Engineering · doi:10.4236/jpee.2016.48003 · Cited by 11

Thermal energy storage systems for cooling in residential buildings

Cabeza, L. F., & de Gracia, Á. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819885-8.00020-6 · Cited by 11

From lab to building: Real-world integration of phase change materials for comfort, energy, and flexibility

Attia, S., Hammouma, T., Galeone, D., Zhang, Z., Zhang, N., Corrado, V., & Yuan, Y. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116813 · Cited by 12

The Potential Applications of Phase Change Materials in Building Materials: A Comprehensive Review

Odeh, A., Alsarhan, H., Almakhadmeh, M. N., Al-Jaafreh, A., & Al‐Fakih, A. (2025) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-025-01751-3 · Cited by 10

Impact of Wall Constructions on Energy Performance of Switchable Insulation Systems

Carlier, R., Dabbagh, M., & Krarti, M. (2020) · Energies · doi:10.3390/en13226068 · Cited by 10

Phase Change Materials Technologies Review and Future Application in Lebanon: Part 1

Eid, S., Brouche, M., Lahoud, C., & Lahoud, C. (2021) · Key engineering materials · doi:10.4028/www.scientific.net/kem.886.228 · Cited by 10

Measurement of PCM-concrete composites thermal properties for energy conservation in building material

Hakim, I. I., Putra, N. S. D., & Agustin, P. D. (2020) · AIP conference proceedings · doi:10.1063/5.0014120 · Cited by 10

Phase Change Materials Technologies Review and Future Application in Lebanon: Part II

Eid, S., Brouche, M., Lahoud, C., & Lahoud, C. (2021) · Key engineering materials · doi:10.4028/www.scientific.net/kem.886.256 · Cited by 10

Phase Change Materials for Applications in Building Thermal Energy Storage (Review)

Habib, M. A., & Rahman, M. M. (2024) · Thermal Engineering · doi:10.1134/s0040601524700174 · Cited by 9

Thermal performance of clay-straw wall incorporating phase change materials in Errachidia city (South Eastern Morocco): A simulation approach

Zaid, Z. B., Tilioua, A., Lamaamar, I., Ansari, O., & Alaoui, M. A. H. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00786 · Cited by 10

The Effect of Thermal Inertia on Office Workers Subjective and Physiological Responses; and Performance Under Summer Conditions

Schweiker, M., & Wagner, A. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.11.676 · Cited by 8

Combination of Passive and Active Solar Heating with Thermal Energy Storage

Thangam, A., Auckaili, A., & Farid, M. M. (2022) · Molecules · doi:10.3390/molecules27144386 · Cited by 7

Computational assessment of a full-scale Mediterranean building incorporating wallboards with phase change materials

Stamatiadou, M., Katsourinis, D. I., & Founti, M. A. (2016) · Indoor and Built Environment · doi:10.1177/1420326x16645384 · Cited by 7

Computer Simulation of Passive Cooling of Wooden House Covered by Phase Change Material

Charvátová, H., Procházka, A., & Zálešák, M. (2020) · Energies · doi:10.3390/en13226065 · Cited by 7

Latent energy storage study in simple and honeycomb structures filled with a phase change material

Mekaddem, N., Ben-Ali, S., Hannachi, A., Mazioud, A., & Foi, M. (2016) · International Renewable Energy Congress · doi:10.1109/irec.2016.7478884 · Cited by 7

Numerical Study of The Thermal Performance of The PCM Wall Under Periodical Outside Temperature Waves

Xia, X., Meng, E., Chen, Y., Liu, Y., Chen, Q., Lu, Y., & Chen, J. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.09.892 · Cited by 7

Experimental and numerical investigations on the influence of phase change materials on heat transfer reduction across the roof of a building

Venkatesh, G., Rajkumar, S., & Babu, G. N. (2023) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2023.2246921 · Cited by 6

Thermal and Energetic Contributions of PCM Plaster According to its Location and Type of Masonry—Experimental and Numerical Studies in a City With a Temperate Mediterranean Climate

Mechouet, A., Mouhib, T., Balhamri, A. A., Bendriaa, F., Raffak, T., & Oualim, E. M. (2020) · IEEE Access · doi:10.1109/access.2020.3004646 · Cited by 6

Preparation and performance of phase change thermoregulating fabric with high heat storage density via spray coating

Lang, X., Xiang, X., & Gao, J. (2024) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250241266976 · Cited by 6

Monolithic Masonry with PCM for Thermal Management

Gassenfeit, B., & Brüggemann, D. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.02.153 · Cited by 6

PCM Current Applications and Thermal Performance

Delgado, J. M. P. Q., Martinho, J. C., Sá, A. V., Guimarães, A. S., & Abrantes, V. (2018) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-3-319-97499-6_3 · Cited by 6

PCM Storage

Cabeza, L. F., Fernández, A. I., Barreneche, C., & Ushak, S. (2015) · Handbook of Clean Energy Systems · doi:10.1002/9781118991978.hces144 · Cited by 6

Thermal characteristics and energy-saving research of P-PCM FinTwall in hot summer and cold winter regions

Ou, S., Wang, P., Yang, S., & Huan, S. (2025) · Energy · doi:10.1016/j.energy.2025.136670 · Cited by 5

Analysis of PCM storage unit for night coolness storage in summer season

Shukla, S. K., & Singh, S. K. (2011) · International Journal of Sustainable Energy · doi:10.1080/14786451.2011.605950 · Cited by 5

Analysis by Differential Scanning Calorimetry of concrete modified with microencapsulated phase change materials

Eddhahak, A., Drissi, S., Colin, J., & Néji, J. (2013) · International Renewable and Sustainable Energy Conference (IRSEC) · doi:10.1109/irsec.2013.6529719 · Cited by 5

Surfactant-free fabrication of phase change material emulsions (PCMEs) using mineral oxide Pickering emulsifiers

Kwak, C., Park, H., Kim, J. H., Lim, S., Yang, J., Kim, J., Kim, J., Lee, J. H., & Lee, J. (2020) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-019-0471-z · Cited by 5

Study on Phase Change Material in Grooved Bricks for Energy Efficiency of the Buildings

Pawar, N. S., Qureshi, Y., Agarwal, R., & Bhanavath, S. N. (2023) · Journal of Architectural Environment & Structural Engineering Research · doi:10.30564/jaeser.v6i2.5542 · Cited by 4

Alternative construction materials: a point of view on energy reduction and indoor comfort parameters

Awoyera, P. O., Effiong, J. U., Nagaraju, V., Haque, M. A., Mydin, M. A. O., & Onyelowe, K. C. (2024) · Discover Sustainability · doi:10.1007/s43621-024-00655-y · Cited by 8

A ventilated cooling ceiling with integrated latent heat storage: test room measurements

Weinläder, H., Kranl, D., & Strieder, B. (2013) · Intelligent Buildings International · doi:10.1080/17508975.2013.775098 · Cited by 4

Energy Evaluation of a Phase Change Material Wall Covered with Novel Triple Glass

Seyhan, A. K. (2014) · DergiPark (Istanbul University) · Cited by 4

3D Numerical Modeling for Assessing the Energy Performance of Single-Zone Buildings with and Without Phase Change Materials

Saber, H. H., & Hajiah, A. E. (2020) · Springer eBooks · doi:10.1007/978-3-030-39734-0_24 · Cited by 4

Integrating phase change materials in thermal energy storage systems for buildings

Kuznik, F., Johannes, K., & Lamrani, B. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819885-8.00013-9 · Cited by 4

Understanding the gap between Efficiency and Comfort

Bradford, K., Coleman, J., & Meggers, F. (2022) · IEEE International Workshop on Metrology for Living Environment (MetroLivEnv) · doi:10.1109/metrolivenv54405.2022.9826936 · Cited by 4

Experimental Study of Thermal Performance of a Reduced Scale Cavity Equipped With Phase Change Material: Study of the Optimal Phase Change Material Layer Location

Gounni, A., Alami, M. E., Mabrouk, M. T., & Kheiri, A. (2018) · Journal of Solar Energy Engineering · doi:10.1115/1.4039331 · Cited by 4

Transpired solar collectors energy efficiency improvement using inertial materials

Bejan, A., Croitoru, C. V., Bordianu, D., Labihi, A., & Chehouani, H. (2017) · doi:10.1109/ciem.2017.8120775 · Cited by 4

Latent heat thermal energy storage systems in lightweight construction: review of PCM applications in Solar Decathlon houses

Rodríguez-Ubiñas, E., Ruiz-Valero, L., Sánchez, S. V., & González, F. J. N. (2011) · WIT transactions on ecology and the environment · doi:10.2495/sdp110781 · Cited by 3

THE USE OF MATERIALS WITH A CHANGING PHASE STATE IN BUILDING ENVELOPE STRUCTURES

Nazirov, R. A., Тараненко, Д. В., & Vede, P. Y. (2019) · Building and reconstruction · doi:10.33979/2073-7416-2019-82-2-90-105 · Cited by 3

Thermal performance investigation of a phase change materials based thermal energy storage system with multiple sets of U-tubes in severe cold region: An experimental study

Wang, Y., Wu, T., Ren, D., Yu, W., Li, B., & Li, J. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118535 · Cited by 2

Innovative Construction Typologies for Ventilated Façades in the Mediterranean Region

Antoniadou, P., Chantzis, G., Theodoridou, I., Christodoulou, A., Symeonidou, M. M., Kyriaki, E., Giama, E., Chadiarakou, S., Boemi, S.-N., Kontos, M., et al. (2023) · International Conference on Smart and Sustainable Technologies (SpliTech) · doi:10.23919/splitech58164.2023.10192976 · Cited by 2

Study on the Influence of the Application of Phase Change Material on Residential Energy Consumption in Cold Regions of China

Wang, C., Shao, Y., Zhao, B., Yang, C., Yu, J., & Guo, H. (2024) · Energies · doi:10.3390/en17071527 · Cited by 3

Application of phase change material in solar energy systems as ventilation system

Sheikholeslami, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15838-4.00015-5 · Cited by 2

Development and characterization of modified sepiolite-based composite phase change materials for building thermal management

Zhong, J., Fan, H., Yu, Q., Wang, Y., Meng, X., Zhang, J., Feng, X., & Yan, J. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.03.057 · Cited by 2

The Composite of MPCM and Building Materials and Its Application in Building Walls: A Review

He, D., & Isa, M. H. M. (2023) · Lecture notes in civil engineering · doi:10.1007/978-981-19-8024-4_20 · Cited by 2

Phase-Change Materials Use in Nearly Zero Energy Building Refurbishment

Cabeza, L. F., & Fernández, A. I. (2013) · Springer eBooks · doi:10.1007/978-1-4471-5523-2_19 · Cited by 2

Evaluation of Thermal Effect of PCM Wallboards by Coupling Simplified Phase Change Model with Design Tool

Guiavarch, A., Bruneau, D., & Peuportier, B. (2014) · Journal of Building Construction and Planning Research · doi:10.4236/jbcpr.2014.21002 · Cited by 2

Application analysis of the heat-storage electric heating floor system powered by PV system and power grid

Zhou, W., Zhao, Y., Zhang, W., Mao, M., & Cao, H. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128731 · Cited by 1

Multi-objective optimization of passive material-based and active operational-based parameters in PCM-enhanced building envelopes

Pourbagian, M., & Derikvand, R. (2025) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2025.101409 · Cited by 1

Passive phase change materials integration in office buildings: Review on impact of HVAC operation controls on thermal performance

Gutiérrez, R. A., Audenaert, A., & Verbeke, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.115026 · Cited by 1

Performance assessment of PCM integrated adjustable shading devices for thermal comfort improvement

Çelik, A., Muratçobanoğlu, B., & Mandev, E. (2026) · Solar Energy · doi:10.1016/j.solener.2026.114612 · Cited by 1

Effect of roughness geometry on heat transfer and friction characteristics of PCM storage unit for night coolness storage in summer season

Shukla, S. K., & Singh, S. K. (2012) · Thermal Science · doi:10.2298/tsci110511023s · Cited by 1

Test and Select of Carrier of Phase Change Materials for Asphalt Mixtures

Ren, Y. Z., Liu, J. Z., Ma, B., & Wang, S. S. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.511.60 · Cited by 1

Energy

Abdallah, T. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811299-1.00003-4 · Cited by 1

Numerical Simulation of Thermal Performance of Micro-PCM Cement Mortar Composite Wall

Hou, F., & Wang, H. (2023) · Civil Engineering and Architectural Research · doi:10.57237/j.cear.2023.01.001 · Cited by 1

Yapıların cam alanlarının enerji etkin iyileştirilmesi ve FDM uygulamasının enerji performansına etkisinin değerlendirilmesi: İstanbul ve Diyarbakır örnekleri

Cengiz, H. T., Gedík, G. Z., & Korkmaz, E. (2024) · Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi · doi:10.17341/gazimmfd.1337385 · Cited by 1

Combining aesthetics and efficiency: PCM applications in Flemish bond walls

Saliby, A., & Kovács, B. (2025) · Pollack Periodica · doi:10.1556/606.2025.01346 · Cited by 1

Enhancement of thermal performance of buildings using cementitious composites containing phase change material

Ramakrishnan, S. (2017) · Swinburne figshare (Swinburne University of Technology) · doi:10.25916/sut.26279047 · Cited by 1

Application of Phase Change Materials for Building Energy Efficiency

Yan, Q., & Li, J. H. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.174-177.912

EFFECT OF ROUGHNESS GEOMETRY ON CHARACTERISTICS OF PHASE CHANGE MATERIAL STORAGE UNIT FOR NIGHT COOLNESS STORAGE IN SUMMER SEASON

Shukla, S. K., & Singh, S. K. (2013)

Zastosowania materiałów zmiennofazowych (PCM) w budownictwie

Musiał, M. (2015) · Izolacje

Sluoksniuotųjų konstrukcijų tyrimas gaisro sąlygomis

Guobys, R. (2014) · doi:10.20334/2247-m

A Variation of Positioning Phase Change Materials (PCMs) Within Building Enclosures and Their Utilization Toward Thermal Performance

Abuzaid, A. I. (2018) · VTechWorks (Virginia Tech)

Numerical study of the efficiency of integrating phase change material into a clay-straw wall in the Drâa-Tafilalet region (Errachidia Province)

Zaid, Z. B., Tilioua, A., Ansari, O., Lamaamar, I., & Alaoui, M. A. H. (2021) · E3S Web of Conferences · doi:10.1051/e3sconf/202129701007

Optimal application of phase change materials and passive cooling systems to improve energy and indoor environmental performance of a highly glazed commercial space in cold climates

Mohammadzadeh, A. (2019) · Mspace (University of Manitoba)

Environment-Friendly Construction Materials

Wu, S., Hoff, I., Amirkhanian, S. N., & Xiao, Y. (2019) · MDPI eBooks · doi:10.3390/books978-3-03921-017-6

Energy

Pacheco-Torgal, F., & Jalali, S. (2011) · Springer eBooks · doi:10.1007/978-0-85729-892-8_3

Almacenamiento de energía térmica por calor latente en los edificios: bases para la optimización de aplicaciones pasivas, opacas y traslúcidas

Ubiñas, E. I. R. (2015) · doi:10.20868/upm.thesis.40328 · Cited by 1

Experimental Analysis of PCM Based Helical Heat-Exchanger for Thermal Management of BuildingsPreprint

Aswanth, A. K., & Shaji, K. (2021) · SSRN Electronic Journal · doi:10.2139/ssrn.4184135

Analysis of improvement of freezing with inclusion of nanopowders utilizing implicit method

Ayed, H. (2022) · International Journal of Modern Physics B · doi:10.1142/s0217979223500613

Impact of phase change materials and brick thickness on thermal comfort in free-floating mode

El-Raheim, D. A., Mohamed, A., Fatouh, M., & Abou-Ziyan, H. (2022) · Engineering Research Journal · doi:10.21608/erj.2022.260162

A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings

Evola, G., Marletta, L., & Sicurella, F. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.09.021 · Cited by 281

Full-scale experimental investigation of room wall containing phase change materials wallboard

Virgone, J., & Kuznik, F. (2007) · HAL · Cited by 1

The Effectiveness of PCM Wallboards for the Energy Refurbishment of Lightweight Buildings

Evola, G., & Marletta, L. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.12.362 · Cited by 33

Full-scale study of a building equipped with phase change material wallboards and a multi-layer rack latent heat thermal energy store system

Borderon, J., Virgone, J., Cantin, R., & Kuznik, F. (2010) · HAL

Impact of phase change wall room on indoor thermal environment in winter

Lv, S., Zhu, N., & Guohui, F. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.02.007 · Cited by 234