The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Steam gasification of biomass with subsequent syngas adjustment using shift reaction for syngas production: An Aspen Plus model
Open accessAbstract
A simulation model of biomass gasification for syngas production with steam as gasifying agent and subsequent syngas adjustment has been developed using Aspen Plus. The developed model is based on Gibbs free energy minimization applying the restricted equilibrium method. The objective is to study the effect of important parameters such as gasification temperature, steam to biomass ratio and shift reaction temperature on hydrogen concentration, CO concentration, CO conversion, CO2 conversion and H2/CO ratio in the syngas. Simulations were performed for different biomass feedstocks to predict their syngas composition. The hydrogen and CO concentrations were altered such that the H2/CO molar ratio in the syngas composition gets adjusted close to a value of 2.15 as required for FT synthesis by the shift reaction. The present model has been validated with experimental data from literature on steam biomass gasification conducted in a research scale fluidized bed gasifier. The product gas obtained from steam gasification of food wastes resulted in a composition with a H2/CO molar ratio close to 2.15 which can be directly fed to a Fischer-Tropsch synthesis plant whereas remaining feedstocks requires a syngas adjustment either by WGS or RWGS reactions to achieve H2/CO molar ratio close to 2.15.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Steam-gasification of biomass in a fluidised-bed of olivine particles
Rapagnà, S. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00031-3 · Cited by 689
Thermodynamic analysis of carbon dioxide reforming of methane in view of solid carbon formation
Nikoo, M. K., & Amin, N. A. S. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.11.027 · Cited by 662
Simulation of biomass gasification in fluidized bed reactor using ASPEN PLUS
Nikoo, M. B., & Mahinpey, N. (2008) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.02.020 · Cited by 559
Gasification of biomass: comparison of fixed bed and fluidized bed gasifier
Warnecke, R. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00009-x · Cited by 398
Fischer‐Tropsch Catalysts for the Biomass‐to‐Liquid (BTL)‐Process
van Steen, E., & Claeys, M. (2008) · Chemical Engineering & Technology · doi:10.1002/ceat.200800067 · Cited by 360
The effect of air preheating in a biomass CFB gasifier using ASPEN Plus simulation
Doherty, W. G., Reynolds, A., & Kennedy, D. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.05.004 · Cited by 299
Cheah, S.-F., Carpenter, D. L., & Magrini‐Bair, K. A. (2009) · Energy & Fuels · doi:10.1021/ef900714q · Cited by 278
Fremaux, S., Beheshti, S.-M., Ghassemi, H., & Markadeh, R. S. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.12.048 · Cited by 272
Application of Fischer–Tropsch Synthesis in Biomass to Liquid Conversion
Hu, J., Yu, F., & Lu, Y. (2012) · Catalysts · doi:10.3390/catal2020303 · Cited by 245
Florin, N., & Harris, A. T. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.06.016 · Cited by 219
Process Optimization of FT-Diesel Production from Lignocellulosic Switchgrass
Martín, M., & Grossmann, I. E. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201261t · Cited by 107
Aspen plus simulation of biomass gasification in a steam blown dual fluidised bed
Doherty, W. G., Reynolds, A., & Kennedy, D. M. (2013) · Arrow - TU Dublin (Technological University Dublin) · Cited by 93
Sreejith, C. C., Muraleedharan, C., & Arun, P. (2013) · International Journal of Sustainable Energy · doi:10.1080/14786451.2012.755977 · Cited by 63
Im-orb, K., Simasatitkul, L., & Arpornwichanop, A. (2015) · Energy · doi:10.1016/j.energy.2015.11.012 · Cited by 61
Importance of the Usage Ratio in Iron-Based Fischer−Tropsch Synthesis with Recycle
Govender, N. S., van Vuuren, M. J., Claeys, M., & Steen, E. E. V. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060415e · Cited by 22
Sharma, A. M., Kumar, A., V, Madihally, S. V., Whiteley, J. R., & Huhnke, R. L. (2014) · Energy · doi:10.1016/j.energy.2014.05.027 · Cited by 8
Cited by
An Overview of Hydrogen Production: Current Status, Potential, and Challenges
Younas, M., Shafique, S., Hafeez, A., Javed, F., & Rehman, F. (2022) · Fuel · doi:10.1016/j.fuel.2022.123317 · Cited by 780
Shayan, E., Zare, V., & Mirzaee, I. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.096 · Cited by 481
A review of biomass gasification modelling
Safarian, S., Unnþórsson, R., & Richter, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.05.003 · Cited by 404
Hassan, Q., Abdulateef, A. M., Hafedh, S. A., Al-samari, A., Abdulateef, J., Sameen, A. Z., Salman, H. M., Al-Jiboory, A. K., Wieteska, S., & Jaszczur, M. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.01.175 · Cited by 390
RetractedMethanol fuel production, utilization, and techno-economy: a review
Deka, T. J., Osman, A. I., Baruah, D. C., & Rooney, D. W. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01485-y · Cited by 265
Metadata
- Authors
- Pala, L. P. R., Wang, Q., Kolb, G., & Hessel, V.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 101
- Pages
- 484-492
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2557214682
- Cited by
- 430
- References
- 16
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.