The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Second generation biofuels production from waste cooking oil via pyrolysis process
Abstract
The thermal cracking of waste cooking oil (WCO) via pyrolysis was performed using a laboratory scale fixed-bed reactor. The effects of the final pyrolysis temperature (from 550 °C to 800 °C) and the heating rate (5 °C/min, 15 °C/min, 20 °C/min, 25 °C/min) on pyrolysis products distribution has been investigated and a maximum bio-oil yield of 80 wt% has been obtained at 800 °C and 15 °C/min. The bio-oil fuel properties shows that this pyrolytic oil has high caloric value (HHV around 8843 kg/Kcal) promoting its use as a liquid fuel but some other properties (high acidity index around 126.8 mg KOH/g sample and high viscosity about 8.95 cSt) need to be upgraded. The GC/MS characterization of the bio-oil highlights its high molecular complexity allowing it to be used as source of chemical products and of active molecules. The syngas heating value (reaching 8 MJ/kg) is suitable for its application as source of energy for the pyrolysis reactor. The remaining biochar is suitable for application as fertilizer since it is rich of iron and organic carbon. The stochiometric model of WCO pyrolysis has been established basing on the pyrolysis products yields, the CHNS-O composition of raw material and remaining biochar, and the syngas chemical composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The biorefinery concept: Using biomass instead of oil for producing energy and chemicals
Cherubini, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.01.015 · Cited by 2,229
Biomass pyrolysis-a review of modelling, process parameters and catalytic studies
Sharma, A., Pareek, V., & Zhang, D. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.193 · Cited by 675
Cited by
Promising evolution of biofuel generations. Subject review
Alalwan, H. A., Alminshid, A. H., & Aljaafari, H. A. S. (2019) · Renewable Energy Focus · doi:10.1016/j.ref.2018.12.006 · Cited by 505
Reactor technologies for biodiesel production and processing: A review
Tabatabaei, M., Aghbashlo, M., Dehhaghi, M., Panahi, H. K. S., Mollahosseini, A., Hosseini, M., & Soufiyan, M. M. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.06.001 · Cited by 483
Application of nanoparticles in biofuels: An overview
Sekoai, P. T., Ouma, C. N. M., du Preez, S. P., Modisha, P., Engelbrecht, N., Bessarabov, D. G., & Ghimire, A. (2019) · Fuel · doi:10.1016/j.fuel.2018.10.030 · Cited by 384
Global biorenewable development strategies for sustainable aviation fuel production
Ng, K. S., Farooq, D., & Yang, A. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111502 · Cited by 350
Progress in utilisation of waste cooking oil for sustainable biodiesel and biojet fuel production
Goh, B. H. H., Chong, C. T., Ge, Y., Ong, H. C., Ng, J.-H., Tian, B., Ashokkumar, V., Lim, S., Seljak, T., & Józsa, V. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113296 · Cited by 311
Metadata
- Authors
- Ben Hassen Trabelsi, A., Zaafouri, K., Baghdadi, W., Naoui, S., & Ouerghi, A.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 126
- Pages
- 888-896
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2796351674
- Cited by
- 158
- References
- 2
- FWCI
- 6.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.