A review on current status and challenges of inorganic phase change materials for thermal energy storage systems

Review on thermal energy storage with phase change materials and applications

Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936

Review on thermal energy storage with phase change: materials, heat transfer analysis and applications

Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2002) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,758

Smithells Metals Reference Book

(1992) · Elsevier eBooks · doi:10.1016/c2009-0-25363-3 · Cited by 3,623

A review on phase change energy storage: materials and applications

Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097

Phase change materials for thermal energy storage

Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,120

A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)

Agyenim, F. B., Hewitt, N., Eames, P., & Smyth, M. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,077

Smithells metals reference book

(2004) · Choice Reviews Online · doi:10.5860/choice.42-1588 · Cited by 1,804

State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization

Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,768

Low temperature latent heat thermal energy storage: Heat storage materials

Abhat, A. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90186-x · Cited by 1,719

95/03996 Heat pipe science and technology

(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)95610-h · Cited by 1,528

Solar energy storage using phase change materials☆

Kenisarin, M. M., & Mahkamov, K. (2006) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.005 · Cited by 1,387

High-temperature phase change materials for thermal energy storage

Kenisarin, M. M. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.011 · Cited by 1,203

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Fan, L., & Khodadadi, J. M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,007

Heat transfer characteristics of thermal energy storage system using PCM capsules: A review

Regin, A. F., Solanki, S. C., & Saini, J. S. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 951

A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium

Jamekhorshid, A., Sadrameli, S. M., & Farid, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.033 · Cited by 918

Heat and cold storage with PCM: An up to date introduction into basics and applications

Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894

Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems

Liu, M., Saman, W. Y., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 869

Heat pipe science and technology

Vasiliev, L. L. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(95)00330-4 · Cited by 842

Thermal stability of phase change materials used in latent heat energy storage systems: A review

Rathod, M. K., & Banerjee, J. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.022 · Cited by 769

Microencapsulated PCM thermal-energy storage system

Hawlader, M. N. A., Uddin, M. S., & Khin, M. M. (2003) · Applied Energy · doi:10.1016/s0306-2619(02)00146-0 · Cited by 744

Performance enhancement in latent heat thermal storage system: A review

Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 707

A review on effect of phase change material encapsulation on the thermal performance of a system

Salunkhe, P. B., & Shembekar, P. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.037 · Cited by 660

Development of a Molten-Salt Thermocline Thermal Storage System for Parabolic Trough Plants

Pacheco, J. E., Showalter, S. K., & Kolb, W. J. (2002) · Journal of Solar Energy Engineering · doi:10.1115/1.1464123 · Cited by 602

Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review

Giró-Paloma, J., Martínez, M., Cabeza, L. F., & Fernández, A. I. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.040 · Cited by 598

High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques

Cárdenas, B., & León, N. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.028 · Cited by 498

HEAT TRANSFER ENHANCEMENT IN A LATENT HEAT STORAGE SYSTEM1Paper presented at the ISES Solar World Congress, Taejon, South Korea, 24–29 August 1997.1

Velraj, R., Seeniraj, R. V., Hafner, B., Faber, C., & Schwarzer, K. (1999) · Solar Energy · doi:10.1016/s0038-092x(98)00128-5 · Cited by 478

Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials

Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478

Springer Handbook of Materials Measurement Methods

Czichos, H., Smith, L., & Saito, T. (2006) · Springer eBooks · doi:10.1007/978-3-540-30300-8 · Cited by 444

Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field

Kearney, D. W., Herrmann, U., Nava, P., Kelly, B., Mahoney, R., Pacheco, J. E., Cable, R. N., Potrovitza, N., Blake, D., & Price, H. (2003) · Journal of Solar Energy Engineering · doi:10.1115/1.1565087 · Cited by 443

Effect of carbon nanofiber additives on thermal behavior of phase change materials

Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430

The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials

Cui, Y., Liu, C., Hu, S., & Yu, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.021 · Cited by 424

A nano-graphite/paraffin phase change material with high thermal conductivity

Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421

Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrix

Mesalhy, O., Lafdi, K., Elgafy, A., & Bowman, K. B. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.06.010 · Cited by 408

Salt hydrates as latent heat storage materials:Thermophysical properties and costs

Kenisarin, M. M., & Mahkamov, K. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.10.029 · Cited by 400

Enhancing thermal conductivity of palmitic acid based phase change materials with carbon nanotubes as fillers

Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2009) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395

Cascaded latent heat storage for parabolic trough solar power plants

Michels, H., & Pitz‐Paal, R. (2006) · Solar Energy · doi:10.1016/j.solener.2006.09.008 · Cited by 375

Low melting point liquid metal as a new class of phase change material: An emerging frontier in energy area

Ge, H., Li, H., Mei, S., & Liu, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.008 · Cited by 372

Solar Thermal Energy Storage

Garg, H. P., Mullick, S. C., & Bhargava, A. K. (1985) · Springer eBooks · doi:10.1007/978-94-009-5301-7 · Cited by 364

Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model

Ling, Z., Chen, J., Xu, T., Fang, X., Gao, X., & Zhang, Z. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.11.040 · Cited by 336

Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systems

Navarro, L., de Gracia, Á., Colclough, S., Browne, M. C., McCormack, S. J., Griffiths, P. W., & Cabeza, L. F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.11.040 · Cited by 319

Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage

Jacob, R., & Bruno, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.038 · Cited by 301

Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material

Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296

Thermal cycling test of few selected inorganic and organic phase change materials

Shukla, A., Buddhi, D., & Sawhney, R. L. (2008) · Renewable Energy · doi:10.1016/j.renene.2008.02.026 · Cited by 296

Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite

Zhao, C., & Wu, Z. G. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.09.032 · Cited by 279

Thermal conductivity enhancement of paraffins by increasing the alignment of molecules through adding CNT/graphene

Babaei, H., Keblinski, P., & Khodadadi, J. M. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.11.013 · Cited by 243

High temperature latent heat thermal energy storage using heat pipes

Shabgard, H., Bergman, T. L., Sharifi, N., & Faghri, A. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.03.035 · Cited by 243

Selection of materials for high temperature latent heat energy storage

Khare, S., Dell’Amico, M., Knight, C., & McGarry, S. A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.020 · Cited by 237

Advanced energy storage materials for building applications and their thermal performance characterization: A review

Khadiran, T., Hussein, M. Z., Zainal, Z., & Rusli, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.081 · Cited by 221

Corrosion effects between molten salts and thermal storage material for concentrated solar power plants

Guillot, S., Faik, A., Rakhmatullin, A. I., Lambert, J., Véron, E., Echégut, P., Bessada, C., Calvet, N., & Py, X. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.057 · Cited by 214

Increased thermal conductivity of liquid paraffin-based suspensions in the presence of carbon nano-additives of various sizes and shapes

Yu, Z., Fang, X., Fan, L., Wang, X., Xiao, Y., Zeng, Y. D., Xu, X., Hu, Y.-C., & Cen, K. (2012) · Carbon · doi:10.1016/j.carbon.2012.10.059 · Cited by 203

Latent heat storage above 120°C for applications in the industrial process heat sector and solar power generation

Tamme, R., Bauer, T., Buschle, J., Laing, D., Muller-Steinhagen, H. M. G., & Steinmann, W. (2007) · International Journal of Energy Research · doi:10.1002/er.1346 · Cited by 199

Preparation and characterization of stearic acid/expanded graphite composites as thermal energy storage materials

Fang, G., Li, H., Chen, Z., & Liu, X. (2010) · Energy · doi:10.1016/j.energy.2010.09.046 · Cited by 193

Springer handbook of materials measurement methods

(2006) · Materials Today · doi:10.1016/s1369-7021(06)71582-6 · Cited by 187

An experimental study on melting heat transfer of paraffin dispersed with Al2O3 nanoparticles in a vertical enclosure

Ho, C. J., & Gao, J. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.065 · Cited by 186

Thermal property measurement and heat storage analysis of LiNO3/KCl – expanded graphite composite phase change material

Huang, Z., Gao, X., Xu, T., Fang, Y., & Zhang, Z. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.11.019 · Cited by 180

Heat transfer characteristics of a molten-salt thermal energy storage unit with and without heat transfer enhancement

Zhang, P., Xiao, X., Meng, Z., & Li, M. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.10.004 · Cited by 176

Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite

Zhong, L., Zhang, X., Luan, Y., Wang, G., Feng, Y., & Feng, D. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.019 · Cited by 175

Encapsulation of copper-based phase change materials for high temperature thermal energy storage

Zhang, G., Li, J., Chen, Y., Xiang, H., Ma, B., Xu, Z., & Ma, X. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.05.012 · Cited by 166

Review on the methodology used in thermal stability characterization of phase change materials

Ferrer, G., Solé, A., Barreneche, C., Martorell, I., & Cabeza, L. F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.187 · Cited by 161

Morphology and thermal properties of electrospun fatty acids/polyethylene terephthalate composite fibers as novel form-stable phase change materials

Chen, C., Wang, L., & Huang, Y. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.05.013 · Cited by 157

Phase change performance of sodium acetate trihydrate with AlN nanoparticles and CMC

Hu, P., Lu, D.-J., Fan, X., Zhou, X., & Chen, Z. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.05.025 · Cited by 151

Salt hydrates used for latent heat storage: Corrosion of metals and reliability of thermal performance

Porisini, F. C. (1988) · Solar Energy · doi:10.1016/0038-092x(88)90136-3 · Cited by 150

Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs

Seeniraj, R. V., & Narasimhan, N. L. (2007) · Solar Energy · doi:10.1016/j.solener.2007.11.001 · Cited by 150

Enhanced heat transfer characteristics of water based copper oxide nanofluid PCM (phase change material) in a spherical capsule during solidification for energy efficient cool thermal storage system

Chandrasekaran, P., Cheralathan, M., Kumaresan, V., & Velraj, R. (2014) · Energy · doi:10.1016/j.energy.2014.05.089 · Cited by 150

Heat transfer and exergy analysis of cascaded latent heat storage with gravity-assisted heat pipes for concentrating solar power applications

Shabgard, H., Robak, C. W., Bergman, T. L., & Faghri, A. (2012) · Solar Energy · doi:10.1016/j.solener.2011.12.008 · Cited by 144

Analysis and optimization of a latent thermal energy storage system with embedded heat pipes

Nithyanandam, K., & Pitchumani, R. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.06.018 · Cited by 143

Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage

Ge, Z., Ye, F., Cao, H. Q., Leng, G., Qin, Y., & Ding, Y. (2013) · Particuology · doi:10.1016/j.partic.2013.09.002 · Cited by 143

Thermal analysis of Al–Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials

Fukahori, R., Nomura, T., Zhu, C., Sheng, N., Okinaka, N., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.164 · Cited by 142

New eutectic alloys and their heats of transformation

Farkas, D., & Birchenall, C. E. (1985) · Metallurgical Transactions A · doi:10.1007/bf02814330 · Cited by 135

An experimental investigation of melting of nanoparticle-enhanced phase change materials (NePCMs) in a bottom-heated vertical cylindrical cavity

Zeng, Y. D., Fan, L., Xiao, Y., Yu, Z., & Cen, K. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.07.022 · Cited by 132

Heat transfer enhancement by metal screens and metal spheres in phase change energy storage systems

ETTOUNEY, H. M., Alatiqi, I. M., Al-Sahali, M., & Al-Ali, S. A. (2004) · Renewable Energy · doi:10.1016/j.renene.2003.11.003 · Cited by 129

Analysis of the experimental behaviour of a 100 kWth latent heat storage system for direct steam generation in solar thermal power plants

Bayón, R., Rojas, E., Valenzuela, L., Zarza, E., & León, J. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.07.011 · Cited by 127

Experimental investigations of porous materials in high temperature thermal energy storage systems

Wu, Z. G., & Zhao, C.-Y. (2011) · Solar Energy · doi:10.1016/j.solener.2011.03.021 · Cited by 126

Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications

Moreno, P., Miró, L., Solé, A., Barreneche, C., Solé, C., Martorell, I., & Cabeza, L. F. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.022 · Cited by 125

Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power

Nithyanandam, K., & Pitchumani, R. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.09.056 · Cited by 124

Heat pipe-assisted melting of a phase change material

Sharifi, N., Wang, S., Bergman, T. L., & Faghri, A. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.03.023 · Cited by 121

Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage

Ye, F., Ge, Z., Ding, Y., & Yang, J. (2013) · Particuology · doi:10.1016/j.partic.2013.05.001 · Cited by 118

Middle term immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 32 to 36°C temperature range

Cabeza, L. F., Illa, J., Roca, J., Badía, F., Mehling, H., Hiebler, S., & Ziegler, F. (2001) · Materials and Corrosion · doi:10.1002/1521-4176(200110)52:10 · Cited by 118

Performance of phase change material boards under natural convection

Liu, H., & Awbi, H. (2008) · Building and Environment · doi:10.1016/j.buildenv.2008.12.002 · Cited by 115

Thermal energy storage in salt hydrates

Telkes, M. (1980) · Solar Energy Materials · doi:10.1016/0165-1633(80)90033-7 · Cited by 113

A review of intercalation composite phase change material: Preparation, structure and properties

Li, M., & Wu, Z. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.016 · Cited by 113

Phase-change characteristics and thermal performance of form-stable n -alkanes/silica composite phase change materials fabricated by sodium silicate precursor

He, F., Wang, X., & Wu, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.08.079 · Cited by 112

Heat transfer characteristics of phase change nanocomposite materials for thermal energy storage application

Li, T., Lee, J.-H., Wang, R. Z., & Kang, Y. T. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.03.054 · Cited by 111

Carbon nanotube grafted with polyalcohol and its influence on the thermal conductivity of phase change material

Li, M., Chen, M., Wu, Z., & Liu, J. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.04.002 · Cited by 110

Miscibility gap alloys with inverse microstructures and high thermal conductivity for high energy density thermal storage applications

Sugo, H., Kisi, E. H., & Cuskelly, D. T. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.11.029 · Cited by 110

Corrosive effects of salt hydrate phase change materials used with aluminium and copper

Farrell, A. J., Norton, B., & Kennedy, D. M. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.04.058 · Cited by 109

Corrosion of metal and polymer containers for use in PCM cold storage

Oró, E., Miró, L., Barreneche, C., Martorell, I., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.10.049 · Cited by 109

Tuning of thermal properties of sodium acetate trihydrate by blending with polymer and silver nanoparticles

Ramirez, B. M. L. G., Glorieux, C., Martín‐Martínez, E. S., & Cuautle, J. D. J. A. F. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.09.049 · Cited by 109

Experimental investigation on thermal and rheological properties of n-octadecane with dispersed TiO2 nanoparticles

Motahar, S., Nikkam, N., Alemrajabi, A. A., Khodabandeh, R., Toprak, M. S., & Muhammed, M. A. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.10.016 · Cited by 108

Enhancement of phase change material (PCM) based latent heat storage system with nano fluid and wavy surface

Abdollahzadeh, M., & Esmaeilpour, M. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.007 · Cited by 108

Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes

Tao, Y. B., He, Y. L., & Qu, Z. (2012) · Solar Energy · doi:10.1016/j.solener.2012.01.004 · Cited by 107

Unconventional experimental technologies available for phase change materials (PCM) characterization. Part 1. Thermophysical properties

Cabeza, L. F., Barreneche, C., Martorell, I., Miró, L., Sari-Bey, S., Fois, M., Paksoy, H. O., Şahan, N., Weber, R., Constantinescu, M., et al. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.191 · Cited by 107

Determination of thermo-physical properties and stability testing of high-temperature phase-change materials for CSP applications

Liu, M., Gomez, J. C., Turchi, C. S., Tay, N. H. S., Saman, W. Y., & Bruno, F. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.03.014 · Cited by 106

LiNO3–NaNO3–KNO3 salt for thermal energy storage: Thermal stability evaluation in different atmospheres

Olivares, R. I., & Edwards, W. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.02.029 · Cited by 106

KNO3/NaNO3 – Graphite materials for thermal energy storage at high temperature: Part II. – Phase transition properties

Lopez, J., Acem, Z., & del Barrio, E. P. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.014 · Cited by 102

Thermal expansion of aluminum and some aluminum alloys

Hidnert, P., & Krider, H. S. (1952) · Journal of research of the National Bureau of Standards · doi:10.6028/jres.048.030 · Cited by 102

Evaluation and selection of energy storage systems for solar thermal applications

Dinçer, İ. (1999) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(19991010)23:12 · Cited by 100

Molecular dynamics simulations of nano-encapsulated and nanoparticle-enhanced thermal energy storage phase change materials

Rao, Z., Wang, S., & Peng, F. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.07.065 · Cited by 99

Solar Heat Storage: Latent Heat Materials, Vol. I: Background and Scientific Principles

Lane, G. A., & Shamsundar, N. (1983) · Journal of Solar Energy Engineering · doi:10.1115/1.3266412 · Cited by 98

Numerical analysis of a PCM thermal storage system with varying wall temperature

Halawa, E., Bruno, F., & Saman, W. Y. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.11.003 · Cited by 96

Numerical study on the thermal behavior of phase change materials (PCMs) embedded in porous metal matrix

Li, Z., & Wu, Z. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.017 · Cited by 96

Thermophysical characterization of Mg–51%Zn eutectic metal alloy: A phase change material for thermal energy storage in direct steam generation applications

Blanco, P., Rodríguez‐Aseguinolaza, J., Risueño, E., & Tello, M. J. (2014) · Energy · doi:10.1016/j.energy.2014.05.058 · Cited by 95

Melting and solidification enhancement using a combined heat pipe, foil approach

Sharifi, N., Bergman, T. L., Allen, M. J., & Faghri, A. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.054 · Cited by 92

Immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 32 to 36 8C temperature range

Cabeza, L. F., Alibés, J. I. I., Enrich, J. R., Pascual, F. B., Mehling, H., Hiebler, S., & Ziegler, F. (2001) · RECERCAT (Consorci de Serveis Universitaris de Catalunya) · doi:10.1002/1521-4176(200102)52:2 · Cited by 91

Immersion corrosion tests on metal‐salt hydrate pairs used for latent heat storage in the 48 to 58°C temperature range

Cabeza, L. F., Roca, J., Nogués, M., Mehling, H., & Hiebler, S. (2002) · Materials and Corrosion · doi:10.1002/maco.200290004 · Cited by 91

Using solid-liquid phase change materials (PCMs) in thermal energy storage systems

Bruno, F., Belusko, M., Liu, M., & Tay, N. H. S. (2014) · Elsevier eBooks · doi:10.1533/9781782420965.2.201 · Cited by 90

Review of liquid metal corrosion issues for potential containment materials for liquid lead and lead–bismuth eutectic spallation targets as a neutron source

Park, J. J., Butt, D. P., & Beard, C. A. (2000) · Nuclear Engineering and Design · doi:10.1016/s0029-5493(99)00303-9 · Cited by 88

High Temperature Thermal Energy Storage Utilizing Metallic Phase Change Materials and Metallic Heat Transfer Fluids

Kotzé, J. P., von Backström, T. W., & Erens, P. J. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4023485 · Cited by 86

Experimental determination of temperature-dependent thermal conductivity of solid eicosane-based nanostructure-enhanced phase change materials

Nabil, M., & Khodadadi, J. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.08.010 · Cited by 85

Fe-shell/Cu-core encapsulated metallic phase change materials prepared by aerodynamic levitation method

Ma, B., Li, J., Xu, Z., & Peng, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.07.054 · Cited by 82

Melting-crystallization and premelting properties of sodium nitrate-potassium nitrate. Enthalpies and heat capacities

Rogers, D. J., & Janz, G. J. (1982) · Journal of Chemical & Engineering Data · doi:10.1021/je00030a017 · Cited by 81

Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material

Xiao, J., Huang, J., Zhu, P., Wang, C., & Li, X. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.04.021 · Cited by 80

Carbon footprint of a thermal energy storage system using phase change materials for industrial energy recovery to reduce the fossil fuel consumption

López-Sabirón, A. M., Royo, P., Ferreira, V. J., Aranda‐Usón, A., & Ferreira, G. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.038 · Cited by 77

Numerical Simulation on Thermal Energy Storage Behavior of Cu/paraffin nanofluids PCMs

Wu, S., Wang, H., Xiao, S., & Zhu, D. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.01.1018 · Cited by 75

Heat storage capacity of sodium acetate trihydrate during thermal cycling

Wada, T., Yamamoto, R., & Matsuo, Y. (1984) · Solar Energy · doi:10.1016/0038-092x(84)90169-5 · Cited by 67

Thermodynamic evaluation of phase equilibria in NaNO3-KNO3 system

Zhang, X., Tian, J., Xu, K., & Gao, Y. (2003) · Journal of Phase Equilibria and Diffusion · doi:10.1361/105497103770330091 · Cited by 63

Thermal analytical model of latent thermal storage with heat pipe heat exchanger for concentrated solar power

Jung, E. G., & Boo, J. H. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.008 · Cited by 61

Modeling of Thermal Energy Storage Shell-and-Tube Heat Exchanger

Parry, A. J., Eames, P., & Agyenim, F. B. (2013) · Heat Transfer Engineering · doi:10.1080/01457632.2013.810057 · Cited by 60

A study on latent heat storage exchangers with the high-temperature phase-change material

He, Q., & Zhang, W. (2001) · International Journal of Energy Research · doi:10.1002/er.683 · Cited by 57

Development of PCM Storage for Process Heat and Power Generation

Steinmann, W., Laing, D., & Tamme, R. (2009) · Journal of Solar Energy Engineering · doi:10.1115/1.3197834 · Cited by 57

A new method of application of hydrated salts on textiles to achieve thermoregulating properties

Kazemi, Z., & Mortazavi, S. M. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.05.015 · Cited by 56

Revolutionizing heat transport enhancement with liquid metals: Proposal of a new industry of water-free heat exchangers

Li, H., & Liu, J. (2011) · Frontiers in Energy · doi:10.1007/s11708-011-0139-9 · Cited by 55

IX.The thermal expansion of the crystal lattices of silver, platinum, and zinc

Owen, E. A., & Yates, E. (1934) · The London Edinburgh and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786443409462374 · Cited by 54

ADVANCED HIGH TEMPERATURE LATENT HEAT STORAGE SYSTEM - DESIGN AND TEST RESULTS

Laing, D., Bauer, T., Steinmann, W., & Lehmann, D. (2009) · elib (German Aerospace Center) · Cited by 53

THE EFFECT OF MICROENCAPSULATED PHASE-CHANGE MATERIAL ON THE COMPRESSIVE STRENGTH OF STRUCTURAL CONCRETE

Norvell, C., Sailor, D. J., & Dusicka, P. (2013) · Journal of Green Building · doi:10.3992/jgb.8.3.116 · Cited by 52

The NaNO3/KNO3 system: the position of the solidus and sub-solidus

Berg, R. W., & Kerridge, D. H. (2004) · Dalton Transactions · doi:10.1039/b403260h · Cited by 49

Heat transfer in a latent heat-storage system using MgCl2·6H2O at the melting point

Choi, J. C., & Kim, S. D. (1995) · Energy · doi:10.1016/0360-5442(94)00051-4 · Cited by 47

Mixtures of calcium chloride hexahydrate with some salt hydrates or anhydrous salts as latent heat storage materials

Kimura, H., & Kai, J. (1988) · Energy Conversion and Management · doi:10.1016/0196-8904(88)90021-0 · Cited by 45

Simulation and Testing of a Latent Heat Thermal Energy Storage Unit with Metallic Phase Change Material

Kotzé, J. P., von Backström, T. W., & Erens, P. J. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.03.093 · Cited by 44

One-dimensional Stefan problem formulation for solidification of nanostructure-enhanced phase change materials (NePCM)

Hasadi, Y. M. F. E., & Khodadadi, J. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.07.095 · Cited by 44

A model for latent heat energy storage systems

Yüksel, N., Avcı, A., & Kılıç, M. (2006) · International Journal of Energy Research · doi:10.1002/er.1210 · Cited by 44

Thermal energy storage system using phase change materials: Constant heat source

Reddy, M., Nallusamy, N., Prasad, A., & Reddy, H. (2010) · Thermal Science · doi:10.2298/tsci100520078r · Cited by 43

Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage

Feng, Ye, Zhiwei, ge, G., Yulong, Ding, D., Jun, J., & Yang (2014) · 中国颗粒学报：英文版 · Cited by 42

Sodium nitrate thermal behavior in latent heat thermal energy storage: A study of the impact of sodium nitrite on melting temperature and enthalpy

Lomonaco, A., Haillot, D., Pernot, E., Franquet, E., & Bédécarrats, J.-P. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.043 · Cited by 38

An experimental study of a non-eutectic mixture of KNO3 and NaNO3 with a melting range for thermal energy storage

Martin, C., Bauer, T., & Muller-Steinhagen, H. M. G. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.03.008 · Cited by 32

Fundamental research on the supercooling phenomenon on heat transfer surfaces—investigation of an effect of characteristics of surface and cooling rate on a freezing temperature of supercooled water

Akio, S., Utaka, Y., Okawa, S., Kazuyuki, M., & Tamaki, A. (1990) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(90)90025-p · Cited by 31

Melting enhancement of a phase change material with presence of a metallic mesh

Shuja, S. Z., Yilbaş, B. S., & Shaukat, M. M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.033 · Cited by 30

Thermal Storage in Ammonium Alum/Ammonium Nitrate Eutectic for Solar Space Heating Applications

Jotshi, C. K., Hsieh, C. K., Goswami, D. Y., Klausner, J. F., & Srinivasan, N. (1998) · Journal of Solar Energy Engineering · doi:10.1115/1.2888041 · Cited by 30

Durability of latent heat storage tube-sheets

Ting, K. C., Giannakakos, P. N., & GILBERT, S. G. (1987) · Solar Energy · doi:10.1016/s0038-092x(87)80035-x · Cited by 28

Application of simultaneous thermomicroscopy/DSC to the study of phase diagrams

Wiedemann, H. G., & Bayer, G. (1985) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01914296 · Cited by 27

Theoretical and experimental study of volumetric change rate during phase change process

Qiaoling, K., Ma, J., & Che, C. (2008) · International Journal of Energy Research · doi:10.1002/er.1498 · Cited by 27

Thermodynamic analysis of the CsNO3-KNO3-NaNo3 system

Jriri, T., Rogez, J., Mathieu, J.-C., & Ansara, I. (1999) · Journal of Phase Equilibria and Diffusion · doi:10.1361/105497199770340770 · Cited by 23

Latent heat thermal energy storage systems above 450 C

Marianowski, L. G., & Maru, H. C. (1977) · Intersociety Energy Conversion Engineering Conference · Cited by 23

Eutectic compound (KNO3/NaNO3 : PCM) quasi-encapsulated into SiC-honeycomb for suppressing natural convection of melted PCM

Li, Y., Guo, B., Huang, G., Shu, P., Kiriki, H., Kubo, S., Ohno, K., & Kawai, T. (2015) · International Journal of Energy Research · doi:10.1002/er.3293 · Cited by 20

Heat transfer characteristics in low-temperature latent heat storage systems using salt hydrates

Choi, J. C., Kim, S. D., & Han, G. Y. (1995) · Korean Journal of Chemical Engineering · doi:10.1007/bf02705655 · Cited by 16

Use of low fusing alloy in dentistry

Wee, A. G., Schneider, R. L., & Aquilino, S. A. (1998) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(98)70029-0 · Cited by 15

An overview of phase change materials and their implication on power demand

Rousse, D. R., Salah, N. B., & Lassue, S. (2009) · IEEE Electrical Power and Energy Conference (EPEC) · doi:10.1109/epec.2009.5420979 · Cited by 15

Thermal storage in metals

Birchenall, C. E., & Telkes, M. (1976) · Cited by 14

Molten-Salt Thermal-Energy Storage Systems

Maru, H. C., Dullea, J. F., Kardas, A., Paul, L., Marianowski, L. G., Ong, E. S., Sampath, V. R., Huang, V. M., & Wolak, J. (1978) · NASA Technical Reports Server (NASA) · Cited by 13

A new experimental device and inverse method to characterize thermal properties of composite phase change materials

Didier, G., Karkri, M., Al‐Maadeed, M. A. A., & Krupa, I. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.08.032 · Cited by 12

Study on the Performance of Nanoparticles as Nucleating Agents for Sodium Acetate Trihydrate

Da, L. (2012) · Journal of Engineering Thermophysics · Cited by 11

Thermal energy storage for solar power plants

Venkatesetty, H. V., & Lefrois, R. T. (1976) · Intersociety Energy Conversion Engineering Conference · Cited by 11

Investigation of metal fluoride thermal energy storage materials

Eichelberger, J. L., & Gillman, H. D. (1977) · Intersociety Energy Conversion Engineering Conference · Cited by 8

CORROSION AND CORROSION PROTECTION HANDBOOK

Reitz, W. E. (1993) · Materials and Manufacturing Processes · doi:10.1080/10426919308934831 · Cited by 7

Molten salt thermal energy storage systems. Project 8981, final report

Maru, H. C., Dullea, J. F., Kardas, A., & Paul, L. (1978) · doi:10.2172/5611465 · Cited by 6

Characterization of phase change material systems using a thermal test device

Jordà, X., Esarte, J., Perpiñà, X., Vellvehi, M., Argandoña, G., & Aresti, M. (2015) · Microelectronics Journal · doi:10.1016/j.mejo.2015.09.022 · Cited by 6

Recent developments in phase change materials for energy storage applications: A review

Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522

Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage

Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910

Advanced Textiles for Personal Thermal Management and Energy

Peng, Y., & Cui, Y. (2020) · Joule · doi:10.1016/j.joule.2020.02.011 · Cited by 748

Shape-stabilized phase change materials based on porous supports for thermal energy storage applications

Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701

Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review

Ibrahim, N. I., Al‐Sulaiman, F. A., Rahman, S., Yilbaş, B. S., & Şahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 586

Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials

Lin, Y., Alva, G., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2018.09.128 · Cited by 504

A Review on Use of Inorganic Phase Change Materials for Thermal Energy Storage Systems: Issues and Challenges

Yadav, D. K., Singh, R. K., Gupta, A. K., Rathore, P. K. S., & Sikarwar, B. S. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-96-8500-4_49

Advances in inorganic and organic phase change materials for thermal energy storage: a comprehensive review of properties, challenges, and innovations

Togun, H., Basem, A., Jweeg, M. J., Biswas, N., Abdulrazzaq, T., Shelare, S. D., Soudagar, M. E. M., Chattopadhyay, A. K., Paul, D., & Sadeq, A. M. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.131668 · Cited by 9

Organic and Inorganic Phase Change Materials in Thermal Energy Storage: A Review on Materials Perspectives and Insights with a Case Study

Hassan, N., Minakshi, M., Hussain, M., Liew, W. Y. H., Mondinos, N., & Jiang, Z. (2025) · Sustainable Engineering · doi:10.51200/susten.v2i1.5264 · Cited by 6

Thermal cycling test of few selected inorganic and organic phase change materials

Shukla, A., Buddhi, D., & Sawhney, R. L. (2008) · Renewable Energy · doi:10.1016/j.renene.2008.02.026 · Cited by 296