The DOI matches its Crossref record; 196 of the 196 references it cites were found in a registry or an index.
Lignocellulose biomass pyrolysis for bio-oil production: A review of biomass pre-treatment methods for production of drop-in fuels
Abstract
Abstract Bio-oil upgrading can be achieved mainly via three types of methods that are biomass pre-treatment, catalytic upgrading and downstream bio-oil upgrading. The article aim is to review the different physicochemical biomass pre-treatment methods used to improve the physiochemical properties of the bio-oils produced from pyrolysis of treated biomass. Biomass pre-treatment could be classified as physical, thermal, chemical and biological methods. The physical methods, such as grinding and densification improve the biomass particle size and density, affecting the heat flow and mass transfer during pyrolysis, while thermal methods, such as torrefaction, decrease the activation energy of the pyrolysis process and increase the amount of hydrocarbons in the produced bio-oil. The chemical methods generally remove the minerals and alkali metals from the biomass, improve its calorific value and enhance other biomass properties. The biomass pre-treatment methods can be integrated with catalytic pyrolysis to enhance the total carbon yield and aromatic hydrocarbons in the bio-oil. This article provides review of the basic principles of the methods, important parameters that affect biomass properties, highlights the key challenges involved in each treatment method and suggests possible future recommendations to further understand the influence of the pre-treatment methods on bio-oil upgrading. In the last section, the effect of integrated catalytic pyrolysis and pre-treatment methods on bio-oil upgrading is provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Biological pretreatment of lignocellulosic biomass – An overview
Sindhu, R., Binod, P., & Pandey, A. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.08.030 · Cited by 1,073
RetractedCharacteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Alvira, P., Tomás-Pejó, E., Ballesteros, M., & Negro, M. J. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.11.093 · Cited by 3,912
Methods for Pretreatment of Lignocellulosic Biomass for Efficient Hydrolysis and Biofuel Production
Kumar, P., Barrett, D. M., Delwiche, M. J., & Stroeve, P. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801542g · Cited by 3,772
The biomass distribution on Earth
Bar-On, Y. M., Phillips, R., & Milo, R. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1711842115 · Cited by 3,723
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Self-citationBiomass pretreatment: Fundamentals toward application
Agbor, V. B., Cicek, N., Sparling, R., Berlin, A., & Levin, D. B. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.05.005 · Cited by 1,985
Cited by
Pretreatment of lignocellulosic biomass: A review on recent advances
Mankar, A. R., Pandey, A., Modak, A., & Pant, K. K. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125235 · Cited by 1,052
Conversion of biomass to biofuels and life cycle assessment: a review
Osman, A. I., Mehta, N., Elgarahy, A. M., Al-Hinai, A., Al-Muhtaseb, A. H., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01273-0 · Cited by 761
“A total enhancement in energy consumption has been investigated by non-OECD (Organisation for Economic Co-operation and Development) countries ( ∼ 473 quadrillions Btus) by 2040, compared with its counterpart of Organisation of the Petroleum Exporting Countries ( ∼ 266 quadrillions Btus) (Kumar et al. 2020).”
BackgroundEngamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Sustainable environmental management and related biofuel technologies
Sharma, S., Kundu, A., Basu, S., Shetti, N. P., & Aminabhavi, T. M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111096 · Cited by 230
Ramos, A., Monteiro, E., & Rouboa, A. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116271 · Cited by 214
Metadata
- Authors
- Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 123
- Pages
- 109763
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3005562583
- Cited by
- 542
- References
- 196
- FWCI
- 23.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lignocellulose biomass pyrolysis for bio-oil production: A review of biomass pre-treatment methods for production of drop-in fuels. https://app.cochat.ai/papers/10.1016/j.rser.2020.109763
- The paper
- Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B. (2020). Lignocellulose biomass pyrolysis for bio-oil production: A review of biomass pre-treatment methods for production of drop-in fuels. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2020.109763
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.