Investigation of pore-scale CaCO3 distributions and their effects on stiffness and permeability of sands treated by microbially induced carbonate precipitation (MICP)
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Physical properties of MICP-treated sands are controlled by CaCO3 distributions in pore space, which remain relatively unexplored. CaCO3 can deposit at the particles’ contact area (contact-cementing), coat sand particles (grain-coating), or create a cementation bridge between soil grains (matrix-supporting). The objectives of this paper are to determine the dominant CaCO3 distributions in pore space and investigate the effects of CaCO3 distributions on the small-strain stiffness (measured by S-and P-wave velocities) and permeability of MICP-treated sands. To achieve these objectives, cemented-sand and uncemented-sand models combined with three ideal CaCO3 distributions (contact-cementing, grain-coating, and matrix-supporting) were used to estimate the S-and P-wave velocities. In order to determine the dominant CaCO3 distributions in pore space, the calculated values from the models were then compared with experimental data. It was concluded that the dominant CaCO3 distributions were a combination of grain-coating and matrix-supporting. The effects of CaCO3 distributions at pore space on the variation of permeability were estimated using Kozeny-Carman and Panda-Lake models with three pore-scale cement distributions (pore-lining, pore-filling, and pore-bridging). The comparison between laboratory-measured and calculated permeability from the pore-filling Panda-Lake model for seven types of sands demonstrated a relatively good match with a maximum difference of one order of magnitude. The comparison suggests the pore-filling Panda-Lake model can be used for estimating the permeability of the MICP-treated sands.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Blott, S. J., & Pye, K. (2001) · Earth Surface Processes and Landforms · doi:10.1002/esp.261 · Cited by 4,385 · cited 3×
“Equations are obtained from Mindlin (1949), Hill (1952), Dvorkin and Nur (1996), and Dvorkin et al. (1999). for the rapid analysis of grain size statistics from the sieve analysis (Blott and Pye, 2001).”
BackgroundMethodRodriguez-Blanco, J. D., Shaw, S., & Benning, L. G. (2011) · Nanoscale · doi:10.1039/c0nr00589d · Cited by 1,141 · cited 1×
“However, aragonite typically crystallizes at high temperature (higher than 35 C), while amorphous CaCO3 is unstable and can transform into calcite and vaterite (Rodriguez-Blanco et al., 2011).”
BackgroundThe Influence of Bacillus pasteurii on the Nucleation and Growth of Calcium Carbonate
Mitchell, A. C., & Ferris, F. G. (2006) · Geomicrobiology Journal · doi:10.1080/01490450600724233 · Cited by 217 · cited 1×
“During the MICP process, the precipitation of CaCO3 in the pore space starts by nucleation around the bacteria cells (Mitchell and Ferris, 2006), followed by growth into different crystal types such as vaterite and calcite; the type of which is controlled mainly by the hydrolysis rate of urea and the rate of CaCO3 pre…”
Background
Metadata
- Authors
- Lin, H., Suleiman, M. T., & Brown, D. G.
- Venue
- Soils and Foundations
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 60
- Issue
- 4
- Pages
- 944-961
- ISSN
- 0038-0806 (ISSN-L)
- OpenAlex
- W3048767980
- Cited by
- 159
- References
- 3
- FWCI
- 5.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.