The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
Open accessAbstract
Concrete made using geopolymer technology is environmental friendly and could be considered as part of the sustainable development. Even though aggregate constitutes major volume in geopolymer concrete, only limited study related to this parameter has been reported. This paper presents the summary of study carried out to understand the influence of aggregate content on the engineering properties of geopolymer concrete. Influence of other parameters on engineering properties of geopolymer concrete such as curing temperature, period of curing, ratio of sodium silicate to sodium hydroxide, ratio of alkali to fly ash and molarity of sodium hydroxide are also discussed in this paper. Based on the study carried out, it could be concluded that a geopolymer concrete with proper proportioning of total aggregate content and ratio of fine aggregate to total aggregate, along with the optimum values of other parameters, can have better engineering properties than the corresponding properties of ordinary cement concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Fire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
Fernández-Jiménez, A., Palomo, J. G., & Puertas, F. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00154-4 · Cited by 598
Engineering properties of inorganic polymer concretes (IPCs)
Sofi, M., van Deventer, J. S. J., Mendis, P. A., & Lukey, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.008 · Cited by 522
Factors affecting the suitability of fly ash as source material for geopolymers
Díaz, E., Allouche, E. N., & Eklund, S. E. (2009) · Fuel · doi:10.1016/j.fuel.2009.09.012 · Cited by 521
Oh, J. E., Monteiro, P. J. M., Jun, S. S., Choi, S., & Clark, S. M. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.010 · Cited by 507
Engineering Properties of Alkali-Activated Fly Ash Concrete
(2006) · ACI Materials Journal · doi:10.14359/15261 · Cited by 476
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0494216 · Cited by 470
Weng, L., & Sagoe-Crentsil, K. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0820-2 · Cited by 467
Temuujin, J., Williams, R. P., & van Riessen, A. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.03.016 · Cited by 465
Calorimetric study of alkaline activation of calcium hydroxide-metakaolin solid mixtures
Alonso, S., & Palomo, A. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00435-x · Cited by 341
High-Strength Geopolymer Using Fine High-Calcium Fly Ash
Chindaprasirt, P., Chareerat, T., Hatanaka, S., & Cao, T. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000161 · Cited by 319
Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete
Wongpa, J., Kiattikomol, K., Jaturapitakkul, C., & Chindaprasirt, P. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.05.012 · Cited by 310
Introduction: Sustainable Development and Concrete Technology
Malhotra, V. M. (2002) · ACI Concrete International · Cited by 299
Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2205-6 · Cited by 251
Making Concrete "Greener" with Fly Ash
Malhotra, V. M. (1999) · ACI Concrete International · Cited by 250
Effect of Source Materials on Geopolymerization
Xu, H., & van Deventer, J. S. J. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0206958 · Cited by 167
Recent advances in the applied chemistry of the rare metals. Jubilee memorial lecture
Atkinson, R. H. (1940) · Journal of the Society of Chemical Industry · doi:10.1002/jctb.5000591202 · Cited by 161
Properties and microstructure of the hardened alkali-activated red mud–slag cementitious material
Pan, Z., Li, D., Yu, J., & Yang, N. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00093-0 · Cited by 157
Engineering Properties of Alkali-Activated Natural Pozzolan Concrete
Bondar, D., Lynsdale, C. J., Milestone, N. B., Hassani, N., & Ramezanianpour, A. A. (2011) · ACI Materials Journal · doi:10.14359/51664217 · Cited by 122
Thakur, R., & Ghosh, S. (2014) · Cited by 69
Effect of activator and curing mode on fly ash-based geopolymers
Hou, Y., Wang, D., Zhou, W., Lu, H., & Wang, L. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-5711-3 · Cited by 64
Cited by
A comprehensive review on the applications of coal fly ash
Yao, Z. T., Ji, X. S., Sarker, P. K., Tang, J. H., Ge, L. Q., Xia, M. S., & Xi, Y. Q. (2015) · Earth-Science Reviews · doi:10.1016/j.earscirev.2014.11.016 · Cited by 1,737
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
Hassan, A., Arif, M., & Shariq, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.051 · Cited by 639
Metadata
- Authors
- Joseph, B., & Mathew, G.
- Venue
- Scientia Iranica
- Publisher
- Elsevier BV
- Published
- 2012-10
- Volume
- 19
- Issue
- 5
- Pages
- 1188-1194
- ISSN
- 1026-3098 (ISSN-L)
- OpenAlex
- W2074060606
- Cited by
- 374
- References
- 27
- FWCI
- 20.37
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.