The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Ball-milled biochar for galaxolide removal: Sorption performance and governing mechanisms
Abstract
The environmental risk of galaxolide (HHCB) spurs the need to develop efficient and economical removal technology. Although sorption is one of the best removal approaches, studies on sorption of HHCB by biochar were limited. With the purpose of combining the advantages of ball-milling and sorption technologies, six ball-milled biochars (BM-biochars) varied with biomasses and pyrolysis temperature were produced, characterized, and tested for HHCB removal from aqueous solution. At an initial HHCB concentration of 2 mg L-1, the unmilled and BM-biochars adsorbed 330-746 and 609-2098 mg kg-1 of HHCB, respectively. The increase in sorption capacities (about 3-fold increase) was mainly ascribed to the increase in BM-biochar's external and internal surface area, pore volume and pore size, and the exposure of the graphitic structure. The removal of HHCB by the BM-biochars increased with increasing pyrolysis temperature. For lower temperature biochar (300 °C wheat straw biochar, WS300), hydrophobic partitioning played a major role in HHCB sorption onto unmilled biochar (log Koc/log Kow value of WS300 was 0.772 at a Ce of 1 mg L-1). Ball milling reduced the hydrophobicity of 300 °C biochar, which diminished the HHCB sorption. However, increased surface area, pore volume, pore size, and graphitic structure provided additional sorption sites, resulting in enhanced HHCB uptake (log Koc/log Kow value of BMWS300 was 1.23 at a Ce of 1 mg L-1). For higher temperature biochars (500 and 700 °C), ball milling mainly enhanced HHCB sorption onto high temperature biochars via surface adsorption, π-π interaction, and pore filling. For WS500, 77.9% of HHCB removal was due to surface adsorption. Ball milling increased this percentage to 96.7% for BMWS500. This work highlighted the potential of ball milling as an excellent engineering method to improve biochar's sorption properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, B., Zhou, D., & Zhu, L. (2008) · Environmental Science & Technology · doi:10.1021/es8002684 · Cited by 1,823
Sun, Y., Gao, B., Yao, Y., Fang, J., Zhang, M., Zhou, Y., Chen, H., & Yang, L. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.10.081 · Cited by 854
Lian, F., & Xing, B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02528 · Cited by 641
Cited by
Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D. C. W., Gupta, J., Gao, B., Cao, X., Tang, J., & Ok, Y. S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123613 · Cited by 561
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Biochar: Production, properties and emerging role as a support for enzyme immobilization
Pandey, D., Daverey, A., & Arunachalam, K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120267 · Cited by 339
Amusat, S. O., Kebede, T. G., Dube, S., & Nindi, M. M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.101993 · Cited by 323
Xiao, J., Hu, R., & Chen, G. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121980 · Cited by 320
Metadata
- Authors
- Zhang, Q., Wang, J., Lyu, H., Zhao, Q., Jiang, L., & Liu, L.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 659
- Pages
- 1537-1545
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W2906818068
- Cited by
- 164
- References
- 3
- FWCI
- 5.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.