Application of concentration-dependent HSDM to the lithium adsorption from brine in fixed bed columns
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Abstract Adsorption of lithium ions from simulated brine using layered lithium-aluminum hydroxides was investigated at 303 K in fixed-bed columns. The lithium adsorption isotherms in simulated brine were conducted using batch system, and the Langmuir isotherm model was found to fit the equilibrium data well. The effects of initial lithium concentration (C0, 200–400 mg/L), bed height (H, 30–200 cm), and feed flow rate (Q, 6–18 mL/min) on lithium breakthrough curves in packed bed columns were investigated systematically. In order to simulate the practical operation process, the breakthrough time was defined when the lithium recovery rate dropped down to 0.6. The column adsorption performance was improved with the increasing of bed height and the decreasing of the initial lithium concentration, feed flow rate. Furthermore, the Homogeneous Surface Diffusion Model (HSDM) with concentration-dependent surface diffusion coefficient was developed to simulate and predict the lithium adsorption curves. The numerical model results showed good agreement with the experimental data in simulated brine and factual brine circumstance, which proved that the model could successfully simulate the column adsorption process of lithium recovery. These results provided important information to design, optimize and scale-up the column adsorption process for lithium recovery from brine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery and recycling of lithium: a review
Swain, B. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.031 · Cited by 1,713
Flexer, V., Baspineiro, C. F., & Galli, C. I. (2018) · Science of the Total Environment · doi:10.1016/j.scitotenv.2018.05.223 · Cited by 768
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Lithium: sources, production, uses, and recovery outlook
Talens Peiró, L., Villalba Méndez, G., & Ayres, R. U. (2013) · JOM · doi:10.1007/s11837-013-0666-4 · Cited by 318
Lithium extraction from Chinese salt-lake brines: opportunities, challenges, and future outlook
Song, J. F., Nghiem, L. D., Li, X.-M., & He, T. (2017) · Environmental Science: Water Research & Technology · doi:10.1039/c7ew00020k · Cited by 269
Tracing global lithium flow: a trade-linked material flow analysis
Sun, X., Hao, H., Zhao, F., & Liu, Z. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.04.012 · Cited by 242
Separating Lithium and Magnesium in Brine by Aluminum-Based Materials
Liu, X., Zhong, M., Chen, X., & Zhao, Z. (2018) · Hydrometallurgy · doi:10.1016/j.hydromet.2018.01.005 · Cited by 153
Cited by
Sun, Y., Wang, Q., Wang, Y., Yun, R., & Xiang, X. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117807 · Cited by 685
Reich, R., Slunitschek, K., Danisi, R. M., Eiche, E., & Kolb, J. (2023) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2022.2047041 · Cited by 120
Investigation on desorption process in fixed bed for lithium recovery
Yang, Y., Jiang, H., & Yu, J. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119596 · Cited by 24
Self-citationDing, T., Wu, Q., Nie, Z., Zheng, M., Wang, Y., & Yang, D. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107647 · Cited by 20
Metadata
- Authors
- Jiang, H., Yang, Y., & Yu, J.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 241
- Pages
- 116682
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W3005424728
- Cited by
- 62
- References
- 7
- FWCI
- 4.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.