The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Self-assembling 2D/2D (MXene/LDH) materials achieve ultra-high adsorption of heavy metals Ni2+ through terminal group modification
Abstract
The application of two-dimensional metal carbides (MXenes) in heavy metal processing has attracted more and more attention. In this experiment, using titanium carbide as a 2D platform, an atomic-scale 2D/2D adsorbent alk-MXene/LDH was constructed by in situ mechanical self-assembly and alkali-level intercalation to remove Ni2+. Due to its unique layered structure, the oxidized functional groups and available active binding sites of MXene nanoplatelets constitute a unique adsorbent for removing heavy metals in water. The adsorption capacity of alk-MXene/LDH adsorbent for Ni2+ was 222.717 mg/g. The efficiency of Ni2+ was 97.35%, and the synthesized material could efficiently remove Ni2+ under a wide range of pH conditions (pH = 5–13). The adsorption behavior was studied using Redlich-Peterson adsorption isotherms, pseudo-second-order kinetics and thermodynamic models. In this study, the adsorbent exhibited excellent reproducibility after 8 adsorption-desorption cycles. According to the experimental results and various characterizations, the mechanism of the adsorbent was revealed. This study indicates that the atomic scale 2D/2D large basal plane has great potential in adsorbents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent
Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500848m · Cited by 580
Cited by
Heavy Metal Water Pollution: A Fresh Look about Hazards, Novel and Conventional Remediation Methods
Zamora-Ledezma, C., Negrete-Bolagay, D., Figueroa, F., Zamora-Ledezma, E., Ni, M., Alexis, F., & Guerrero, V. H. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101504 · Cited by 1,246
MXenes as emerging nanomaterials in water purification and environmental remediation
Yu, S., Tang, H., Zhang, D., Wang, S., Qiu, M., Song, G., Fu, D., Hu, B., & Wang, X. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.152280 · Cited by 445
A review on heavy metal ions adsorption from water by layered double hydroxide and its composites
Feng, X., Long, R., Wang, L., Liu, C., Bai, Z., & Liu, X. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.120099 · Cited by 329
Self-citationAbidli, A., Huang, Y., Ben Rejeb, Z., Zaoui, A., & Park, C. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133102 · Cited by 194
Al-Amrani, W. A., & Onaizi, S. A. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127018 · Cited by 116
Metadata
- Authors
- Feng, X., Yu, Z., Long, R., Li, X., Shao, L., Zeng, H., Zeng, G., & Zuo, Y.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 253
- Pages
- 117525
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W3047111697
- Cited by
- 180
- References
- 1
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.