Multi-frequency electromagnetic energy harvester using a magnetic spring cantilever
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this study, an array of four generators is designed and fabricated to demonstrate the possibility of harvesting energy from different environmental frequencies. The magnetic spring technique is used as a cantilever to scavenge energy from low frequency vibrations. Initially, a single frequency energy harvester is optimized in terms of the number of turns, coil width, and coil position. Finally, two configurations of a multi-generator are fabricated. In model A, four individual generators are placed side by side; whereas in model B, the generators are placed one above the other. The experimental results show that both models can operate in the 7–10 Hz frequency range. The power densities of model A and model B are 21.92 μW/cm 3 and 52.02 μW/cm 3 , respectively, at an acceleration of 0.5 g .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy scavenging sources for biomedical sensors
Romero, E., Warrington, R. O., & Neuman, M. R. (2009) · Physiological Measurement · doi:10.1088/0967-3334/30/9/r01 · Cited by 165
Cited by
Micro electrostatic energy harvester with both broad bandwidth and high normalized power density
Zhang, Y., Wang, T., Luo, A., Hu, Y., Li, X., & Wang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.053 · Cited by 423
Electromagnetic energy harvesting using magnetic levitation architectures: A review
Carneiro, P., Soares dos Santos, M. P., Rodrigues, A., Ferreira, J. A. F., Simões, J. A. O., Marques, A. T., & Kholkin, A. L. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114191 · Cited by 264
Zhao, H., Xiao, X., Xu, P., Zhao, T., Song, L., Pan, X., Mi, J., Xu, M., & Wang, Z. L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902824 · Cited by 183
Luo, A., Zhang, Y., Dai, X., Wang, Y., Xu, W., Lu, Y., Wang, M., Fan, K., & Wang, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115762 · Cited by 140
Takeya, K., Sasaki, E., & Kobayashi, Y. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.10.002 · Cited by 50
Metadata
- Authors
- Foisal, A. R. M., Hong, C., & Chung, G.-S.
- Venue
- Sensors and Actuators A: Physical
- Publisher
- Elsevier BV
- Published
- 2012-08
- Volume
- 182
- Pages
- 106-113
- ISSN
- 0924-4247 (ISSN-L)
- OpenAlex
- W2027972484
- Cited by
- 190
- References
- 1
- FWCI
- 17.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.