The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets
Abstract
Abstract 3D printing has been reported as a remarkable technology for development of electrochemical devices, due to no design constraints, waste minimization and, most importantly, fast prototyping. The use of 3D printed electrodes for electroanalytical applications is still a challenge and demand efforts. In this work, we have developed low-cost and reproducible 3D-printed graphene electrodes for electrocatalytic detection of dopamine. Electrocatalytic features were enhanced after electrochemical pre-treatment. The oxidation and reduction at different potential ranges, in 0.1 mol L−1 phosphate buffer solution (pH = 7.4), are used to modulate the structural and morphological characteristics of the electrodes. Since, the electrochemical properties of the electrodes, including electron transfer kinetic and the electrocatalytic activity, are strongly influenced by electronic properties and the presence of functional groups. Raman spectroscopy, SEM and AFM microscopes and electrochemical techniques were used to characterize the 3D electrodes before and after the electrochemical pre-treatments. Finally, the performances of the 3D-printed graphene electrodes were evaluated towards dopamine sensing. The best performance was achieved by oxidation at + 1.8 V vs. SCE for 900 s and reduction from 0.0 V to -1.8 V vs. SCE at 50 mV s−1. The proposed sensor presented linear response from 2.0 μmol L−1 to 10.0 μmol L−1, with detection limit of 0.24 μmol L−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Lasi, H., Fettke, P., Kemper, H.-G., Feld, T., & Hoffmann, M. (2014) · Business & Information Systems Engineering · doi:10.1007/s12599-014-0334-4 · Cited by 4,276
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in Seawater
Su, C.-K., Peng, P.-J., & Sun, Y.-C. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01599 · Cited by 111
Cited by
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
Self-citation3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Complete Additively Manufactured (3D-Printed) Electrochemical Sensing Platform
Richter, E. M., Rocha, D. P., Cardoso, R. M., Keefe, E. M., Foster, C. W., Munoz, R. A. A., & Banks, C. E. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b02573 · Cited by 338
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Metadata
- Authors
- dos Santos, P. L., Katic, V., Loureiro, H. C., dos Santos, M. F., dos Santos, D. P., Formiga, A. L. B., & Bonacin, J. A.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 281
- Pages
- 837-848
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2900208549
- Cited by
- 163
- References
- 5
- FWCI
- 5.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets. https://app.cochat.ai/papers/10.1016/j.snb.2018.11.013
- The paper
- dos Santos, P. L., Katic, V., Loureiro, H. C., dos Santos, M. F., dos Santos, D. P., Formiga, A. L. B., & Bonacin, J. A. (2019). Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets. Sensors and Actuators B: Chemical. https://doi.org/10.1016/j.snb.2018.11.013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.