The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review
Abstract
The present review is an extensive overview of the research progress obtained in the field of Phase Change Material (PCM) integrated with solar thermal applications. Solar energy has become an attractive method of using clean energy to eliminate the shortage and environmental drawbacks of fossil fuels but it needs energy storage to bridge the mismatch between times of energy demand and energy supply. Latent Heat Storage (LHS) in PCMs is the most suitable solution for thermal energy storage due to their high latent heat. In this review, special attention is given to recent publications in the field of PCM integrated with solar thermal applications along with the material problems and possible solutions. Finally, future directions on possible studies and applications are proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
Hasnain, S. M. (1998) · Energy Conversion and Management · doi:10.1016/s0196-8904(98)00025-9 · Cited by 1,267
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Phase change materials and thermal energy storage for buildings
de Gracia, A., & Cabeza, L. F. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.007 · Cited by 688
A review on effect of phase change material encapsulation on the thermal performance of a system
Salunkhe, P. B., & Shembekar, P. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.037 · Cited by 657
Zhang, H., Wang, X., & Wu, D. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.036 · Cited by 534
Phase change material (PCM) storage for free cooling of buildings—A review
Waqas, A., & Ud Din, Z. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.034 · Cited by 532
Yu, S., Wang, X., & Wu, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.10.029 · Cited by 531
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Lizana, J., Chacartegui, R., Barrios-Padura, A., & Valverde, J. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.008 · Cited by 410
Thermal conductivity enhancement in a latent heat storage system
Mettawee, E.-B. S., & Assassa, G. M. R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.11.009 · Cited by 378
Mehrali, M., Latibari, S. T., Mehrali, M., Metselaar, H. S. C., & Silakhori, M. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.11.023 · Cited by 375
Self-citationKabeel, A. E., & Abdelgaied, M. (2016) · Desalination · doi:10.1016/j.desal.2016.01.006 · Cited by 336
Fang, G., Chen, Z., & Li, H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.054 · Cited by 333
Kabeel, A. E., Khalil, A., Shalaby, S. M., & Zayed, M. E. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.068 · Cited by 303
Jacob, R., & Bruno, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.038 · Cited by 296
Thermal analysis of a weir-type cascade solar still integrated with PCM storage
Dashtban, M., & Tabrizi, F. F. (2011) · Desalination · doi:10.1016/j.desal.2011.06.044 · Cited by 290
Evacuated tube solar collectors integrated with phase change materials
Papadimitratos, A., Sobhansarbandi, S., Pozdin, V., Zakhidov, A., & Hassanipour, F. (2016) · Solar Energy · doi:10.1016/j.solener.2015.12.040 · Cited by 278
He, F., Wang, X., & Wu, D. (2014) · Energy · doi:10.1016/j.energy.2013.11.088 · Cited by 265
Thermal performance of a greenhouse with a phase change material north wall
Berroug, F., Lakhal, E. K., El Omari, M., Faraji, M., & El Qarnia, H. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.07.020 · Cited by 264
Review on micro/nano phase change materials for solar thermal applications
Qiu, L., Ouyang, Y., Feng, Y., & Zhang, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.03.088 · Cited by 255 · cited 1×
“Dispersing nanoparticles with high thermal conductivity into PCM (nano-PCM) is one of the techniques widely used to improve the heat transfer of PCM (Bazri et al., 2018; Qiu et al., 2019).”
MethodArunkumar, T., Denkenberger, D., Ahsan, A., et al. (2013) · Desalination · doi:10.1016/j.desal.2013.01.018 · Cited by 253
Stability of sugar alcohols as PCM for thermal energy storage
Solé, A., Neumann, H., Niedermaier, S., Martorell, I., Schossig, P., & Cabeza, L. F. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.03.020 · Cited by 245
Mahfuz, M. H., Anisur, M. R., Kibria, M. A., Saidur, R., & Metselaar, I. H. S. C. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.07.022 · Cited by 236
A review for phase change materials (PCMs) in solar absorption refrigeration systems
Khan, M. M. A., Saidur, R., & Al-Sulaiman, F. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.070 · Cited by 230
Cheng, W.-L., Rong-ming, Z., Xie, K., Liu, N., & Wang, J. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.05.020 · Cited by 227
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.08.002 · Cited by 226
Design and performance of solar powered absorption cooling systems in office buildings
Eicker, U., & Pietruschka, D. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2008.07.015 · Cited by 224
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.06.057 · Cited by 221
Microencapsulation of PCMs with a polystyrene shell
Sánchez, L., Sánchez, P., de Lucas, A., Carmona, M., & Rodríguez, J. F. (2007) · Colloid and Polymer Science · doi:10.1007/s00396-007-1696-7 · Cited by 221
Brick masonry walls with PCM macrocapsules: An experimental approach
Vicente, R., & Silva, T. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.02.069 · Cited by 220
Sánchez-Silva, L., Rodríguez, J. F., Romero, A., Borreguero, A. M., Carmona, M., & Sánchez, P. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.12.013 · Cited by 218
Azzouz, K., Leducq, D., & Gobin, D. (2009) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2009.03.012 · Cited by 211
The performance of a modified solar still using hot air injection and PCM
Kabeel, A. E., Abdelgaied, M., & Mahgoub, M. (2016) · Desalination · doi:10.1016/j.desal.2015.11.007 · Cited by 209
Benli, H., & Durmuş, A. (2009) · Solar Energy · doi:10.1016/j.solener.2009.07.005 · Cited by 205
Tamme, R., Bauer, T., Buschle, J., Laing, D., Müller-Steinhagen, H., & Steinmann, W.-D. (2008) · International Journal of Energy Research · doi:10.1002/er.1346 · Cited by 199
PCM thermal storage system for ‘free’ heating and cooling of buildings
Osterman, E., Butala, V., & Stritih, U. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.04.012 · Cited by 197
Performance enhancement of a household refrigerator by addition of latent heat storage
Azzouz, K., Leducq, D., & Gobin, D. (2008) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2007.09.007 · Cited by 197
Investigating performance improvement of solar collectors by using nanofluids
Javadi, F. S., Saidur, R., & Kamalisarvestani, M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.06.053 · Cited by 195
Self-citationZhao, D., & Tan, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.051 · Cited by 193
Chen, Z., Gu, M., & Peng, D. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.04.031 · Cited by 189
Ho, C. J., & Gao, J. Y. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.065 · Cited by 183
Economic impact of integrating PCM as passive system in buildings using Fanger comfort model
Saffari, M., de Gracia, A., Ushak, S., & Cabeza, L. F. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2015.12.006 · Cited by 179
Raam Dheep, G., & Sreekumar, A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.03.058 · Cited by 177
Comparative life cycle assessment of thermal energy storage systems for solar power plants
Oró, E., Gil, A., de Gracia, A., Boer, D., & Cabeza, L. F. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.01.008 · Cited by 177
Energy storage applications in greenhouses by means of phase change materials (PCMs): a review
Kürklü, A. (1998) · Renewable Energy · doi:10.1016/s0960-1481(97)83337-x · Cited by 173
The use of PCM panels to improve storage condition of frozen food
Gin, B., & Farid, M. M. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.04.016 · Cited by 172
Energy and economic analysis of a building air-conditioner with a phase change material (PCM)
Chaiyat, N. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.068 · Cited by 169
Benli, H., & Durmuş, A. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2008.09.004 · Cited by 167
Solar air heater with phase change material: An energy analysis and a comparative study
El Khadraoui, A., Bouadila, S., Kooli, S., Guizani, A., & Farhat, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.004 · Cited by 167
Encapsulation of copper-based phase change materials for high temperature thermal energy storage
Zhang, G., Li, J., Chen, Y., Xiang, H., Ma, B., Xu, Z., & Ma, X. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.05.012 · Cited by 166
Chaabane, M., Mhiri, H., & Bournot, P. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.07.089 · Cited by 165
PEG/SiO2–Al2O3 hybrid form-stable phase change materials with enhanced thermal conductivity
Tang, B., Wu, C., Qiu, M., Zhang, X., & Zhang, S. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.12.036 · Cited by 162
Design of a solar absorption cooling system in a Greek hospital
Tsoutsos, T. D., Aloumpi, E., Gkouskos, Z., & Karagiorgas, M. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2009.09.002 · Cited by 159
Cheng, W.-L., Mei, B.-J., Liu, Y.-N., Huang, Y., & Yuan, X. (2011) · Energy · doi:10.1016/j.energy.2011.08.050 · Cited by 151
Cao, L., Tang, F., & Fang, G. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.028 · Cited by 151
Improving thermal performance of freezers using phase change materials
Oró, E., Miró, L., Farid, M. M., & Cabeza, L. F. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2012.01.004 · Cited by 150
Calise, F. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.01.011 · Cited by 150
Feng, Y., Li, H., Li, L., Bu, L., & Wang, T. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.10.048 · Cited by 148
Qiu, X., Li, W., Song, G., Chu, X., & Tang, G. (2012) · Energy · doi:10.1016/j.energy.2012.08.037 · Cited by 148
Wang, F., Lin, W., Ling, Z., & Fang, X. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.11.016 · Cited by 148
Global policy of rural electrification
Javadi, F. S., Rismanchi, B., Sarraf, M., Afshar, O., Saidur, R., Ping, H. W., & Rahim, N. A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.053 · Cited by 146
Self-citationSun, J., Zhang, R. Y., Liu, Z. P., & Lu, G. H. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.017 · Cited by 139
Li, M., Chen, M., & Wu, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.029 · Cited by 135
Shin, H. K., Park, M., Kim, H. Y., & Park, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.035 · Cited by 130
Salaün, F., Bedek, G., Devaux, É., Dupont, D., & Gengembre, L. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.11.033 · Cited by 129
Jiang, Z., Ouyang, T., Yang, Y., Chen, L., Fan, X., Chen, Y., Li, W., & Fei, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.052 · Cited by 127
Bazri, S., Badruddin, I. A., Naghavi, M. S., & Bahiraei, M. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.11.030 · Cited by 126
Modeling of a solar powered absorption cycle for Abu Dhabi
Al-Alili, A., Islam, M., Kubo, I., Hwang, Y., & Radermacher, R. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.11.034 · Cited by 123
Feliński, P., & Sekret, R. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.07.065 · Cited by 123
Liu, L., Alva, G., Huang, X., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.08.035 · Cited by 121
Modeling of greenhouse with PCM energy storage
Najjar, A., & Hasan, A. A. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.04.015 · Cited by 119
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.08.001 · Cited by 118
Al-Ugla, A. A., El-Shaarawi, M. A. I., Said, S. A. M., & Al-Qutub, A. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.047 · Cited by 117
Helm, M., Keil, C., Hiebler, S., Mehling, H., & Schweigler, C. (2009) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2009.02.010 · Cited by 116
Economic optimization of PCM and insulation layer thickness in residential buildings
Baniassadi, A., Sajadi, B., Amidpour, M., & Noori, N. (2016) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2016.01.008 · Cited by 114
Kong, X., Wang, L., Li, H., et al. (2019) · Solar Energy · doi:10.1016/j.solener.2019.11.081 · Cited by 114
Li, Y., Guo, B., Huang, G., Kubo, S., & Shu, P. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.008 · Cited by 112
Performance analysis of a household refrigerator integrating a PCM heat exchanger
Elarem, R., Mellouli, S., Abhilash, E., & Jemni, A. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.113 · Cited by 109
Stefan problems for moving phase change materials and multiple solutions
Türkyılmazoğlu, M. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.019 · Cited by 106
A state-of-the-art review on hybrid heat pipe latent heat storage systems
Naghavi, M. S., Ong, K. S., Mehrali, M., Badruddin, I. A., & Metselaar, H. S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.044 · Cited by 103
Self-citationLopez, J., Acem, Z., & del Barrio, E. P. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.014 · Cited by 102
Naghavi, M. S., Ong, K. S., Badruddin, I. A., Mehrali, M., Silakhori, M., & Metselaar, H. S. C. (2015) · Energy · doi:10.1016/j.energy.2015.08.100 · Cited by 97
Self-citationKelly, N. J., Tuohy, P. G., & Hawkes, A. D. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.12.019 · Cited by 95
Maruoka, N., Sato, K., Yagi, J.-I., & Akiyama, T. (2002) · ISIJ International · doi:10.2355/isijinternational.42.215 · Cited by 92
Long term thermal stability of organic PCMs
Behzadi, S., & Farid, M. M. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.032 · Cited by 92
Thermoeconomic optimization of Solar Heating and Cooling systems
Calise, F., d’Accadia, M. D., & Vanoli, L. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.10.025 · Cited by 90
Experimental study on cool storage air-conditioning system with spherical capsules packed bed
Fang, G., Wu, S., & Liu, X. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.01.018 · Cited by 83
Pirasaci, T., & Goswami, D. Y. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.105 · Cited by 83
Li, X., Liu, Y., Wang, X., Miao, X., Yao, Y. F., & Qiang, Q.-Q. (2018) · Energy · doi:10.1016/j.energy.2018.02.107 · Cited by 83
Encapsulated phase change materials for energy storage – Characterization by calorimetry
Zheng, Y., Zhao, W., Sabol, J. C., Tuzla, K., Neti, S., Öztekin, A., & Chen, J. C. (2012) · Solar Energy · doi:10.1016/j.solener.2012.10.003 · Cited by 79
Naghavi, M. S., Ong, K. S., Badruddin, I. A., Mehrali, M., & Metselaar, H. S. C. (2017) · Energy · doi:10.1016/j.energy.2017.03.097 · Cited by 79
Self-citationThermophysical characterization of a by-product from the non-metallic industry as inorganic PCM
Ushak, S., Gutiérrez, A., Galleguillos, H. R., Fernández, Á. G., Cabeza, L. F., & Grágeda, M. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.08.042 · Cited by 75
Thermal Stress Analysis of PCM Encapsulation for Heat Recovery of High Temperature Waste Heat.
Maruoka, N., & Akiyama, T. (2003) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.36.794 · Cited by 75
Qiu, X., Song, G., Chu, X., Li, X., & Tang, G. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.10.027 · Cited by 71
Venkitaraj, K. P., & Suresh, S. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.05.018 · Cited by 71
Khakzad, F., Alinejad, Z., Shirin‐Abadi, A. R., Ghasemi, M., & Mahdavian, A. R. (2013) · Colloid & Polymer Science · doi:10.1007/s00396-013-3076-9 · Cited by 70
Yamaha, M., & Misaki, S. (2006) · Science and Technology for the Built Environment · doi:10.1080/10789669.2006.10391213 · Cited by 69
Fabrication and Performances of Microencapsulated Palmitic Acid with Enhanced Thermal Properties
Latibari, S. T., Mehrali, M., Mehrali, M., Mahlia, T. M. I., & Metselaar, H. S. C. (2015) · Energy & Fuels · doi:10.1021/ef502840f · Cited by 69
Self-citationSerale, G., Goia, F., & Perino, M. (2016) · Solar Energy · doi:10.1016/j.solener.2016.04.030 · Cited by 69
Llorach-Massana, P., Peña, J., Rieradevall, J., & Montero, J. I. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.11.040 · Cited by 69
Yin, H., Qu, M., & Zhao, F. (2010) · Renewable Energy · doi:10.1016/j.renene.2010.08.005 · Cited by 68
Cheng, W.-L., & Yuan, X. (2013) · Energy · doi:10.1016/j.energy.2013.06.045 · Cited by 67
Experimental investigation of a latent heat storage for solar cooling applications
Palomba, V., Brancato, V., & Frazzica, A. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.037 · Cited by 63
SODIUM NITRATE FOR HIGH TEMPERATURE LATENT HEAT STORAGE
Bauer, T., Laing, D., Ulrike, K., et al. (2009) · elib (German Aerospace Center) · Cited by 62
Minimising energy usage for domestic cooling with off-peak PCM storage
Bruno, F., Tay, N. H. S., & Belusko, M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.02.069 · Cited by 61
Theoretical modelling and experimental investigation of a thermal energy storage refrigerator
Marques, A. C., Davies, G. F., Evans, J. A., Maidment, G. G., & Wood, I. D. (2013) · Energy · doi:10.1016/j.energy.2013.03.091 · Cited by 61
Phase change stability of CaCl2·6H2O
Kimura, H., & Kai, J. (1984) · Solar Energy · doi:10.1016/0038-092x(84)90011-2 · Cited by 59
Soares, N., Reinhart, C. F., & Hajiah, A. E. (2017) · Building Simulation · doi:10.1007/s12273-017-0347-2 · Cited by 59
Falco, M. D., Capocelli, M., & Giannattasio, A. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.016 · Cited by 55
Godarzi, A. A., Jalilian, M., Samimi, J., Jokar, A., & Vesaghi, M. A. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2012.08.028 · Cited by 48
Bai, Y., He, X., Liu, Y., Duan, J., Wang, Y., & Han, X. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.04.034 · Cited by 44
Effect of Phase Change Material on Performance of a Household Refrigerator
Kha, M. I. H., & Afroz, H. M. M. (2013) · Asian Journal of Applied Sciences · doi:10.3923/ajaps.2013.56.67 · Cited by 40
Falco, M. D., Capocelli, M., Losito, G., & Piemonte, V. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.153 · Cited by 40
Thermal stability of organic binary PCMs for energy storage
Song, M., Wan, M. P., Swapnil, D., Dongmei, P., & Mao, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.459 · Cited by 26
Cited by
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Al-Yasiri, Q., & Szabó, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102122 · Cited by 432
Encapsulation methods for phase change materials – A critical review
Huang, Y., Stonehouse, A., & Abeykoon, C. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123458 · Cited by 286
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Javadi, F. S., Metselaar, H. S. C., & Ganesan, P.
- Venue
- Solar Energy
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 206
- Pages
- 330-352
- ISSN
- 0038-092X (ISSN-L)
- OpenAlex
- W3035365585
- Cited by
- 386
- References
- 121
- FWCI
- 24.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.