The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool and its effect on cutting performance for H13 hardened steel
Abstract
Abstract During metal cutting process, thermal contact resistance (TCR) generated at TiAlN-coated tool and chip contact interface is enhanced compared with that generated at uncoated tool and chip interface. However, the TCR enhancement mechanism need to be revealed and its effects on cutting process need to be discussed. In this research, enhancement mechanism of the TCR generated at TiAlN-coated tool and chip interface was analyzed by comparing with the TCR formation mechanism of uncoated tool. Then, effects of the TCR on cutting temperature, cutting forces and tool life were analyzed. It was found higher nanohardness and elastic modulus of TiAlN-coated tool decreased the deformation of rake face asperities. Lower thermal conductivity and greater specific heat of Al2O3 layer resisted cutting heat conducting into tool. Thermophysical properties of TiAlN coating and generation of Al2O3 oxide layer explained the enhancement mechanism of the TCR. Compared with uncoated tool, the enhanced TCR of TiAlN-coated tool caused more cutting heat to been trapped in chip. Meanwhile, the radial cutting force was reduced by 16.82% and the tool life was extended by 29.41%. Therefore, the enhanced TCR improved TiAlN-coated tool cutting performance when machining H13 hardened steel.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This increase in aluminum in the region is believed to have formed a hard aluminum oxide layer, known for improved hardness in high-heat applications [59].”
From Machinability Performance of Single Coated and Multicoated Carbide Tools During Turning Ti6Al4V Alloy (2025) · cites this paper as [59]
Citations
Cites
Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning
Jindal, P. C., Santhanam, A. T., Schleinkofer, U., & Shuster, A. F. (1999) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/s0263-4368(99)00008-6 · Cited by 439
Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools
Devillez, A., Schneider, F., Dominiak, S., Dudzinski, D., & Larrouquere, D. (2007) · Wear · doi:10.1016/j.wear.2006.10.009 · Cited by 377
Madhusudana, C. V. (2013) · Mechanical engineering series · doi:10.1007/978-3-319-01276-6 · Cited by 324
Modern coatings in high performance cutting applications
Kalss, W., Reiter, A., Derflinger, V., Gey, C., & Endrino, J. L. (2006) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2005.11.005 · Cited by 312
Madhusudana, C. V. (1996) · Mechanical Engineering Series · doi:10.1007/978-1-4612-3978-9 · Cited by 304
Advanced Machining Processes of Metallic Materials: Theory, Modelling, and Applications
Grzesik, W. (2016) · Cited by 277
Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayer films
Barshilia, H. C., Prakash, M. S., Jain, A., & Rajam, K. S. (2004) · Vacuum · doi:10.1016/j.vacuum.2004.08.020 · Cited by 212
Modelling of temperature and forces when orthogonally machining hardened steel
Ng, E.-G., Aspinwall, D. K., Brazil, D., & Monaghan, J. (1999) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(98)00077-7 · Cited by 162
Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions
Coelho, R. T., Ng, E.-G., & Elbestawi, M. A. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.03.020 · Cited by 156
Thermal contact resistance at low contact pressure: Effect of elastic deformation
Bahrami, M., Yovanovich, M. M., & Culham, J. R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.02.033 · Cited by 93
Cited by
Sousa, V. F. C., Silva, F. J. G., Pinto, G., Baptista, A., & Alexandre, R. (2021) · Metals · doi:10.3390/met11020260 · Cited by 189
Zhao, J., Liu, Z., Wang, B., Hu, J., & Wan, Y. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107302 · Cited by 169
Self-citationThe heat partition into cutting tool at tool-chip contact interface during cutting process: a review
Hao, G., & Liu, Z. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05404-9 · Cited by 62
Self-citationGuo, X., Liu, F., Zhang, K., Wang, C., Zhanpeng, P., & Sun, L. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147580 · Cited by 51
Zhang, X., Peng, Z., Li, Z., Sui, H., & Zhang, D. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.10.053 · Cited by 46
Metadata
- Authors
- Hao, G., & Liu, Z.
- Affiliations
- Shandong University (CN)
- Corresponding author
- Liu, Zhanqiang
- ORCID
- Liu, Zhanqiang
- Venue
- Surface and Coatings Technology
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 385
- Pages
- 125436
- ISSN
- 0257-8972 (ISSN-L)
- OpenAlex
- W3004829876
- Cited by
- 23
- References
- 30
- Citations by year
- 2025: 1 · 2024: 6 · 2023: 2 · 2022: 4 · 2021: 5 · 2020: 5
- FWCI
- 1.97
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Surface and Coatings Technology (publishedVersion)
- Funders
- National Natural Science Foundation of China
- Taishan Scholar Foundation of Shandong Province
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Keywords
- thermal contact resistance, TiAlN coating, aluminum oxide layer, tool-chip interface, cutting temperature, cutting force, tool life, chip temperature, thermophysical properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool and its effect on cutting performance for H13 hardened steel. https://app.cochat.ai/papers/10.1016/j.surfcoat.2020.125436
- The paper
- Hao, G., & Liu, Z. (2020). Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool and its effect on cutting performance for H13 hardened steel. Surface and Coatings Technology. https://doi.org/10.1016/j.surfcoat.2020.125436
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
