The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Comparison of surface properties of wood biomass activated carbons and their application against rhodamine B and methylene blue dye
Abstract
Abstract Chemical agents and activation atmosphere have a pretty good influence on the formation of activated carbons, surface characteristic, and its adsorption properties. In this experiment, the effect of activating agents (H3PO4, ZnCl2, KOH, and CaO) on Acacia mangium wood under nitrogen and carbon dioxide gas atmosphere were evaluated. The obtained activated carbons were characterized by percent burn-off, field emission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy (EDX), image analysis, textural properties, Fourier transform infrared spectroscopy (FTIR), powder x-ray diffraction (XRD), thermogravimetric analysis (TGA), proton adsorption capacity, and pHzpc. The results revealed that the chemical activation increased the yield and oxygen-free atmosphere created by nitrogen gas was more efficient in producing significant surface area, and large pore volume activated carbons with a pore size in the range of 2 nm–50 nm. Among the activating agents, the H3PO4 was observed to be most appropriate in the presence of N2 activation atmosphere for the production of the large surface area (BET surface area, 1161.29 m2/g) activated carbons (AMH1) from Acacia mangium wood. The adsorption capacity of AMH1 against rhodamine B and methylene blue were found to be 76.66 mg/g and 159.89 mg/g, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wu, F.-C., Tseng, R.-L., & Juang, R.-S. (2005) · Separation and Purification Technology · doi:10.1016/j.seppur.2005.03.013 · Cited by 193
Cited by
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Review on recent advances of carbon based adsorbent for methylene blue removal from waste water
Santoso, E., Ediati, R., Kusumawati, Y., Bahruji, H., Sulistiono, D. O., & Prasetyoko, D. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.100233 · Cited by 500
Jawad, A. H., Saud Abdulhameed, A., Wilson, L. D., Syed-Hassan, S. S. A., ALOthman, Z. A., & Rizwan Khan, M. (2021) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.09.070 · Cited by 425
Hamad, H. N., & Idrus, S. (2022) · Polymers · doi:10.3390/polym14040783 · Cited by 326
The N-doped activated carbon derived from sugarcane bagasse for CO2 adsorption
Han, J., Zhang, L., Zhao, B., Qin, L., Wang, Y., & Xing, F. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.028 · Cited by 267
Metadata
- Authors
- Danish, M., Ahmad, T., Hashim, R., Said, N., Akhtar, M. N., Mohamad-Saleh, J., & Sulaiman, O.
- Venue
- Surfaces and Interfaces
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 11
- Pages
- 1-13
- ISSN
- 2468-0230 (ISSN-L)
- OpenAlex
- W2791171560
- Cited by
- 206
- References
- 1
- FWCI
- 10.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of surface properties of wood biomass activated carbons and their application against rhodamine B and methylene blue dye. https://app.cochat.ai/papers/10.1016/j.surfin.2018.02.001
- The paper
- Danish, M., Ahmad, T., Hashim, R., Said, N., Akhtar, M. N., Mohamad-Saleh, J., & Sulaiman, O. (2018). Comparison of surface properties of wood biomass activated carbons and their application against rhodamine B and methylene blue dye. Surfaces and Interfaces. https://doi.org/10.1016/j.surfin.2018.02.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.