The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Synthesis of pyrolyzed biochar and its application for dye removal: Batch, kinetic and isotherm with linear and non-linear mathematical analysis
Abstract
The adsorbent was prepared from pyrolyzed rice husk -an agricultural industry waste- efficiently utilized for the removal of dye molecule (malachite green) from a water-based mixture in a bioreactor. The maximum removal of dye by the biochar was about 99.98% with an adsorbent dosage of 0.2 mg L−1 at pH 6.2, 20 mg L−1 dye concentration after 2 h. In the present research study, adsorption isotherm and equilibrium kinetics on Malachite green dye molecule by pyrolyzed biochar was analyzed. Intraparticle Diffusion Model, Elovich models, pseudo second order, and Pseudo-first order model was utilized for the analysis of adsorption kinetics whereas the Freundlich, Langmuir, Temkin, and D-R model was used to describe the equilibrium isotherm. Pseudo second order kinetics best describes the adsorption uptake rate of dye on biochar surface with R2=0.996. Equilibrium isotherm was only worthy fitted by Langmuir Isotherm with R2=0.999. A comparative study between non-linearized and linearized methods of determining the isotherm and kinetic parameters were done. Four different pseudo second order and Langmuir isotherm expressions have been discussed in detail in this paper. The R2 (coefficient of determination) was employed to determine the best-fit expression. It can be concluded from the results, that the non-linearized model is the best fit for both the parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Burakov, A. E., Galunin, E. V., Burakova, I. V., Kucherova, A. E., Agarwal, S., Tkachev, A. G., & Gupta, V. K. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.11.034 · Cited by 1,612
Textile dyeing industry an environmental hazard
Kant, R. (2012) · Natural Science · doi:10.4236/ns.2012.41004 · Cited by 1,545
Mohammadi, N., Khani, H., Gupta, V. K., Amereh, E., & Agarwal, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.06.067 · Cited by 818
Cited by
Jjagwe, J., Olupot, P. W., Menya, E., & Kalibbala, H. M. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.03.003 · Cited by 616
Haleem, A., Shafiq, A., Chen, S.-Q., & Nazar, M. (2023) · Molecules · doi:10.3390/molecules28031081 · Cited by 374
Srivatsav, P., Bhargav, B., Shanmugasundaram, V., Arun, J., Gopinath, K., & Bhatnagar, A. (2020) · Water · doi:10.3390/w12123561 · Cited by 318
Metadata
- Authors
- Ganguly, P., Sarkhel, R., & Das, P.
- Venue
- Surfaces and Interfaces
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 20
- Pages
- 100616
- ISSN
- 2468-0230 (ISSN-L)
- OpenAlex
- W3047357100
- Cited by
- 179
- References
- 3
- FWCI
- 7.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis of pyrolyzed biochar and its application for dye removal: Batch, kinetic and isotherm with linear and non-linear mathematical analysis. https://app.cochat.ai/papers/10.1016/j.surfin.2020.100616
- The paper
- Ganguly, P., Sarkhel, R., & Das, P. (2020). Synthesis of pyrolyzed biochar and its application for dye removal: Batch, kinetic and isotherm with linear and non-linear mathematical analysis. Surfaces and Interfaces. https://doi.org/10.1016/j.surfin.2020.100616
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.