The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Highly efficient and rapid removal of a toxic dye: Adsorption kinetics, isotherm, and mechanism studies on functionalized multiwalled carbon nanotubes
Abstract
Abstract In the present work, multiwalled carbon nanotubes functionalized with L-tyrosine (CNT-TYR) was used as a nanoadsorbent to remove a toxic dye, methylene blue (MB). To understand the adsorption behaviour of the MB dye on the nanoadsorbent, the adsorption mechanism, kinetics and isotherm were studied in detail. The factors that influence the adsorption process such as stirring speed (200–800 rpm), contact time (0–150 min), amount of nanoadsorbent (5–25 mg), pH (2–10), temperature (25–65 °C), and initial dye concentration (10–300 mg L−1) were optimized. It was observed that >95% adsorption occurred at pH 6, 25 °C temperature, and 7 min of contact time. The maximum adsorption capacity attained at the optimum conditions was 440 mg g−1, which is higher in comparison to other reported nanoadsorbents. The kinetics study was done using pseudo first order, pseudo second order, intraparticle diffusion, and fractional power model, and the results indicated that the pseudo second order model was followed for the adsorption of MB dye on CNT-TYR. The study of adsorption isotherms was conducted for the Langmuir, Freundlich, Temkin, Elovich, and Redlich-Peterson models, and the results revealed that the Langmuir model was better fitted to the obtained data (R2>0.99) than the other models, which indicated monolayer adsorption via chemisorption. The reason for the high adsorption capacity of CNT-TYR was explained by the different types of interactions such as electrostatic, π-π interaction, and H-bonding, which explain the adsorption mechanism and were further confirmed by the FTIR spectrum of MB saturated nanoadsorbent. The results indicate that CNT-TYR has high efficiency for the removal of dyes and various other toxic contaminants present in water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dye and its removal from aqueous solution by adsorption: A review
Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.04.002 · Cited by 4,357
Guidelines for the use and interpretation of adsorption isotherm models: a review
Al-Ghouti, M. A., & Da'ana, D. A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122383 · Cited by 3,535
Adsorption of methylene blue on low-cost adsorbents: A review
Rafatullah, M., Sulaiman, O., Hashim, R., & Ahmad, A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.12.047 · Cited by 3,153
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957
Ma, J., Yu, F., Zhou, L., Jin, L., Yang, M., Luan, J., Tang, Y., Fan, H., Yuan, Z., & Chen, J. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301053m · Cited by 746
Inyinbor, A. A., Adekola, F. A., & Olatunji, G. A. (2016) · Water Resources and Industry · doi:10.1016/j.wri.2016.06.001 · Cited by 639
Batool, F., Akbar, J., Iqbal, S., Noreen, S., & Bukhari, S. N. A. (2018) · Bioinorganic Chemistry and Applications · doi:10.1155/2018/3463724 · Cited by 381
Rajabi, M., Mahanpoor, K., & Moradi, O. (2017) · RSC Adv. · doi:10.1039/c7ra09377b · Cited by 260
Remediation of Heavy Metals and Dyes from Wastewater Using Cellulose-Based Adsorbents
Varghese, A. G., Paul, S. A., & Latha, M. S. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-018-00843-z · Cited by 231
Harrache, Z., Abbas, M., Aksil, T., & Trari, M. (2019) · Microchemical Journal · doi:10.1016/j.microc.2018.09.004 · Cited by 215
Cited by
Srivatsav, P., Bhargav, B., Shanmugasundaram, V., Arun, J., Gopinath, K., & Bhatnagar, A. (2020) · Water · doi:10.3390/w12123561 · Cited by 318
Metadata
- Authors
- Saxena, M., Sharma, N., & Saxena, R.
- Venue
- Surfaces and Interfaces
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 21
- Pages
- 100639
- ISSN
- 2468-0230 (ISSN-L)
- OpenAlex
- W3049410045
- Cited by
- 266
- References
- 21
- FWCI
- 10.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly efficient and rapid removal of a toxic dye: Adsorption kinetics, isotherm, and mechanism studies on functionalized multiwalled carbon nanotubes. https://app.cochat.ai/papers/10.1016/j.surfin.2020.100639
- The paper
- Saxena, M., Sharma, N., & Saxena, R. (2020). Highly efficient and rapid removal of a toxic dye: Adsorption kinetics, isotherm, and mechanism studies on functionalized multiwalled carbon nanotubes. Surfaces and Interfaces. https://doi.org/10.1016/j.surfin.2020.100639
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.