Type of materials, pyrolysis conditions, carbon content and size dimensions: The parameters that influence the mechanical properties of biochar cement-based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Interest in biochar, a sub-product of biomass pyrolysis, has increased enormously in the last few years, finding applications in a wide variety of fields. In the present work, a standardized biochar was used as a nano/micro-filler in cement-based composites, ensuring the reproducibility of cement mixtures. Although, in terms of flexural strength and fracture energy, results were inferior compared to the previous studies conducted at Politecnico di Torino. Nonetheless, an overall enhancement of mechanical properties was recorded with the introduction of standardized biochar in cementitious composites. This paper attempts to show that some parameters of biochar processes, e.g. production, temperature, heating rate or pressure, as well as some biochar features such as carbon content, particle size distribution or porosity dramatically influence the enhancement of mechanical properties of cementitious composites. This result is extremely important, because it indicates that, even if the parameters are not optimal, biochar can be used to create new green building materials because of its effectiveness in cementitious composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Weber, K., & Quicker, P. (2018) · Fuel · doi:10.1016/j.fuel.2017.12.054 · Cited by 1,522
Gupta, S., Kua, H. W., & Tan Cynthia, S. Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.012 · Cited by 126
Cited by
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Green construction for low-carbon cities: a review
Chen, L., Huang, L., Hua, J., Chen, Z., Wei, L., Osman, A. I., Fawzy, S., Rooney, D. W., Dong, L., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01544-4 · Cited by 358
Incorporation of biochar in cementitious materials: A roadmap of biochar selection
Maljaee, H., Madadi, R., Paiva, H., Tarelho, L., & Ferreira, V. M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122757 · Cited by 250
A Review of Non-Soil Biochar Applications
Bartoli, M., Giorcelli, M., Jagdale, P., Rovere, M., & Tagliaferro, A. (2020) · Materials · doi:10.3390/ma13020261 · Cited by 156
“[281] evaluated the performance of a standardized biochar set that was produced by UK Biochar Research Center [282], considering flexural strength and fracture energy.”
BackgroundChen, X., Li, J., Xue, Q., Huang, X., Liu, L., & Poon, C. S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120723 · Cited by 137
Metadata
- Authors
- Cosentino, I., Restuccia, L., Ferro, G. A., & Tulliani, J.-M.
- Venue
- Theoretical and Applied Fracture Mechanics
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 103
- Pages
- 102261
- ISSN
- 0167-8442 (ISSN-L)
- OpenAlex
- W2947956518
- Cited by
- 79
- References
- 2
- FWCI
- 4.67
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Type of materials, pyrolysis conditions, carbon content and size dimensions: The parameters that influence the mechanical properties of biochar cement-based composites. https://app.cochat.ai/papers/10.1016/j.tafmec.2019.102261
- The paper
- Cosentino, I., Restuccia, L., Ferro, G. A., & Tulliani, J.-M. (2019). Type of materials, pyrolysis conditions, carbon content and size dimensions: The parameters that influence the mechanical properties of biochar cement-based composites. Theoretical and Applied Fracture Mechanics. https://doi.org/10.1016/j.tafmec.2019.102261
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.