The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Phase field fracture modelling using quasi-Newton methods and a new adaptive step scheme
Open accessAbstract
We investigate the potential of quasi-Newton methods in facilitating convergence of monolithic solution schemes for phase field fracture modelling. Several paradigmatic boundary value problems are addressed, spanning the fields of quasi-static fracture, fatigue damage and dynamic cracking. The finite element results obtained reveal the robustness of quasi-Newton monolithic schemes, with convergence readily attained under both stable and unstable cracking conditions. Moreover, since the solution method is unconditionally stable, very significant computational gains are observed relative to the widely used staggered solution schemes. In addition, a new adaptive time increment scheme is presented to further reduces the computational cost while allowing to accurately resolve sudden changes in material behavior, such as unstable crack growth. Computation times can be reduced by several orders of magnitude, with the number of load increments required by the corresponding staggered solution being up to 3000 times higher. Quasi-Newton monolithic solution schemes can be a key enabler for large scale phase field fracture simulations. Implications are particularly relevant for the emerging field of phase field fatigue, as results show that staggered cycle-by-cycle calculations are prohibitive in mid or high cycle fatigue. The finite element codes are available to download from www.empaneda.com/codes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Revisiting brittle fracture as an energy minimization problem
Francfort, G. A., & Marigo, J.-J. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00034-9 · Cited by 3,530
Miehe, C., Hofacker, M., & Welschinger, F. (2010) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2010.04.011 · Cited by 3,100
Miehe, C., Welschinger, F., & Hofacker, M. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2861 · Cited by 2,942
Amor, H., Marigo, J.-J., & Maurini, C. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2009.04.011 · Cited by 1,662
Approximation of functional depending on jumps by elliptic functional via t‐convergence
Ambrosio, L., & Tortorelli, V. M. (1990) · Communications on Pure and Applied Mathematics · doi:10.1002/cpa.3160430805 · Cited by 1,471
A length scale insensitive phase-field damage model for brittle fracture
Wu, J.-Y., & Nguyen, V. P. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.06.006 · Cited by 662
Crack nucleation in variational phase-field models of brittle fracture
Tanné, E., Li, T., Bourdin, B., Marigo, J.-J., & Maurini, C. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.09.006 · Cited by 654
Phase-field modeling of fracture
(2020) · Advances in Applied Mechanics · doi:10.1016/bs.aams.2019.08.001 · Cited by 620
The solution of nonlinear finite element equations
Matthies, H., & Strang, G. (1979) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620141104 · Cited by 511
Metadata
- Authors
- Kristensen, P. K., & Martínez-Pañeda, E.
- Venue
- Theoretical and Applied Fracture Mechanics
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 107
- Pages
- 102446
- ISSN
- 0167-8442 (ISSN-L)
- OpenAlex
- W2994799468
- Cited by
- 300
- References
- 27
- FWCI
- 15.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Phase field fracture modelling using quasi-Newton methods and a new adaptive step scheme. https://app.cochat.ai/papers/10.1016/j.tafmec.2019.102446
- The paper
- Kristensen, P. K., & Martínez-Pañeda, E. (2020). Phase field fracture modelling using quasi-Newton methods and a new adaptive step scheme. Theoretical and Applied Fracture Mechanics. https://doi.org/10.1016/j.tafmec.2019.102446
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.