Measurement of congestion and intrinsic risk in pedestrian crowds
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this study, we present a method to quantify the amount of congestion and the intrinsic risk in pedestrian crowds. Levels of congestion are estimated based on the velocity vector field obtained from the analysis of video recordings of moving crowds. By using data collected during supervised experiments, we show that the so-called “congestion level” allows to define a threshold for congestion under safe conditions and to measure the smoothness of pedestrian flows. The proposed approach has been compared with alternative quantities such as density, flow or the “crowd pressure” showing a more universal and consistent description of crowd motion. Later, the “crowd danger” of different pedestrian streams has been computed confirming that multidirectional motion is more dangerous than unidirectional one for equal levels of density. From a more practical perspective, the congestion level allowed to get a complete picture of the region in front of bottlenecks and to identify the formation of organized structures also under constant density and flow conditions. In addition, since only velocities are used in the computational process of the congestion level, it is more suitable for applications involving computer vision and emerging technologies, since density is usually difficult to obtain in very crowded situations. The congestion level and the crowd danger may help in the design of pedestrian facilities by simplifying interpretation of results from simulation and efficiently identify hotspots or design flaws. Finally, crowd control may benefit from the methods presented by potentially allowing a clear identification of dangerous locations during mass events.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Crowd Analysis Using Computer Vision Techniques
Silveira Jacques Junior, J., Musse, S., & Jung, C. (2010) · IEEE Signal Processing Magazine · doi:10.1109/msp.2010.937394 · Cited by 343
Cited by
Intelligent video surveillance: A review through deep learning techniques for crowd analysis
Sreenu, G., & Saleem Durai, M. A. (2019) · Journal of Big Data · doi:10.1186/s40537-019-0212-5 · Cited by 460
Haghani, M., Bliemer, M. C. J., Goerlandt, F., & Li, J. (2020) · Safety Science · doi:10.1016/j.ssci.2020.104806 · Cited by 265
Traffic flow in a crowd of pedestrians walking at different speeds
Fujita, A., Feliciani, C., Yanagisawa, D., & Nishinari, K. (2019) · Physical Review E · doi:10.1103/physreve.99.062307 · Cited by 47
Self-citation
Metadata
- Authors
- Feliciani, C., & Nishinari, K.
- Venue
- Transportation Research Part C: Emerging Technologies
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 91
- Pages
- 124-155
- ISSN
- 0968-090X (ISSN-L)
- OpenAlex
- W2797438761
- Cited by
- 163
- References
- 1
- FWCI
- 9.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.