The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Soil and clay stabilization with calcium- and non-calcium-based additives: A state-of-the-art review of challenges, approaches and techniques
Abstract
Abstract Soil stabilization is a technique to improve the engineering and geotechnical properties of soils such as mechanical strength, permeability, compressibility, durability and plasticity. Much has been learned about soil stabilization techniques and additives over the past century. The state of the practice in stabilization techniques and challenges is presented with a discussion. Moreover, available studies regarding the effects of various types of stabilizing agents on the engineering and geotechnical properties of stabilized soils are reviewed here. These stabilizing agents include both calcium-based and non-calcium-based additives. Eco-friendly additives as alternative materials to conventional stabilizing agents are also discussed in this paper. In addition, the problems associated with the presence of disruptive salts and sulfate as well as the techniques to overcome these problems in soil stabilization projects are reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
The greening of the concrete industry
Meyer, C. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.12.010 · Cited by 1,548
Lime stabilization of clay minerals and soils
Bell, F. G. (1996) · Engineering Geology · doi:10.1016/0013-7952(96)00028-2 · Cited by 1,378
Trends and developments in green cement and concrete technology
Imbabi, M. S., Carrigan, C., & McKenna, S. (2012) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2013.05.001 · Cited by 1,012
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Effect of nano-silica on rheology and fresh properties of cement pastes and mortars
Senff, L., Labrincha, J. A., Ferreira, V. M., Hotza, D., & Repette, W. L. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.005 · Cited by 714
Stabilization of residual soil with rice husk ash and cement
Basha, E. A., Hashim, R., Mahmud, H. B., & Muntohar, A. S. (2005) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.08.001 · Cited by 695
Sodium silicate-based, alkali-activated slag mortars
Brough, A. R., & Atkinson, A. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00717-2 · Cited by 694
Analysis of strength development in cement-stabilized silty clay from microstructural considerations
Horpibulsuk, S., Rachan, R., Chinkulkijniwat, A., Raksachon, Y., & Suddeepong, A. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.03.011 · Cited by 662
Factors affecting the suitability of fly ash as source material for geopolymers
Díaz, E., Allouche, E. N., & Eklund, S. E. (2009) · Fuel · doi:10.1016/j.fuel.2009.09.012 · Cited by 571
Cited by
Behnood, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.209 · Cited by 387
Self-citationJalal, F. E., Xu, Y., Iqbal, M., Javed, M. F., & Jamhiri, B. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.112420 · Cited by 261
Metadata
- Authors
- Behnood, A.
- Venue
- Transportation Geotechnics
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 17
- Pages
- 14-32
- ISSN
- 2214-3912 (ISSN-L)
- OpenAlex
- W2888567836
- Cited by
- 390
- References
- 135
- FWCI
- 22.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.