The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites
Abstract
In the present work, influence of silane solution concentration on mechanical, tribological and morphological properties of Corn Stalk Fiber (CSF) reinforced polymer composites was investigated. Experimental results showed that the silane-treated CSF reinforced polymer composite (CMS) exhibited a promising property of low density. Silane solution treatments of the CSF could effectively reduce the water absorption and apparent porosity of the polymer composite system. The silane-treated CSF could not effectively improve the friction performance, but could significantly improve the wear rate of the polymer composites. Especially, the sum wear rate of 5% silane-treated CSF reinforced composite (5% CMS) decreased by 22.8% from 4.792 × 10−7 cm3(N⋅m)−1 to 3.699 × 10−7 cm3(N⋅m)−1 compared with that of the raw CSF reinforced composite (CMU), showing the best wear resistant behavior. Worn surfaces were examined by Scanning Electron Microscopy and the results revealed that the silane-treated CSF was conducive to the formation of secondary plateaus on the polymer composite surface, which could obviously improve the tribological and morphological properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Cited by
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Biopolymer composites: a review
Aaliya, B., Sunooj, K. V., & Lackner, M. (2021) · International Journal of Biobased Plastics · doi:10.1080/24759651.2021.1881214 · Cited by 298
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.128 · Cited by 260
Członka, S., Strąkowska, A., & Kairytė, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106534 · Cited by 122
Metadata
- Authors
- Liu, Y., Xie, J., Wu, N., Wang, L., Ma, Y., & Tong, J.
- Venue
- Tribology International
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 131
- Pages
- 398-405
- ISSN
- 0301-679X (ISSN-L)
- OpenAlex
- W2899612277
- Cited by
- 158
- References
- 1
- FWCI
- 7.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.