The DOI matches its Crossref record.
Transient simulation of finned heat sinks embedded with PCM for electronics cooling
Open accessAbstract
This paper reports the two-dimensional ( 2 D ) transient numerical simulation of a phase change material (PCM) based finned heat sink to investigate the heat transfer performance for passive cooling of electronic devices. The finned heat sinks of 2 mm and 3 mm fin thickness are employed with a constant fin volume fraction of 9 % , acting as thermal conductivity enhancer (TCE). The n-eicosane is employed as a PCM inside the heat sink to store the heat generated from the electronic device applied at the heat sink base. Transient numerical simulations are performed using finite-volume-method and conjugate heat transfer and melting/solidification phenomenon are investigated by applying various power levels. The numerical results show that the employed PCM with low temperature keeps the heat sink base temperature in lower limits and uniform melting is observed inside the finned heat sink. With the increase of heating power level, the PCM melting time is decreased for fin thickness heat sinks. By increasing the power level from 4 to 6 W, for the case of 3 mm fin thickness, the melting time increases by 6.63 % , 3.59 % and 1.90 % by 3 mm fin thickness heat sink, compared to the 2 mm fin thickness heat sink. The developed equations of liquid fraction and modified Nusselt number are obtained as function of modified Fourier number, Stefan number, and Rayleigh number which provide guidelines for generalizing the thermal performance of PCM based finned heat sinks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of the state-of-the-art in electronic cooling
Zhang, Z., Wang, X., & Yan, Y. (2021) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2021.100009 · Cited by 310
Self-citationPhase change materials for thermal management and energy storage: A review
Lawag, R. A., & Ali, H. M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105602 · Cited by 279
Tiari, S., Hockins, A., & Mahdavi, M. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.100999 · Cited by 122
Metadata
- Authors
- Arshad, A., Jabbal, M., Sardari, P. T., Bashir, M. A., Faraji, H., & Yan, Y.
- Venue
- Thermal Science and Engineering Progress
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 18
- Pages
- 100520
- ISSN
- 2451-9049 (ISSN-L)
- OpenAlex
- W3010147698
- Cited by
- 169
- References
- 0
- FWCI
- 13.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Transient simulation of finned heat sinks embedded with PCM for electronics cooling. https://app.cochat.ai/papers/10.1016/j.tsep.2020.100520
- The paper
- Arshad, A., Jabbal, M., Sardari, P. T., Bashir, M. A., Faraji, H., & Yan, Y. (2020). Transient simulation of finned heat sinks embedded with PCM for electronics cooling. Thermal Science and Engineering Progress. https://doi.org/10.1016/j.tsep.2020.100520
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.