CoChat

Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites

Chen, Ke, Yu, Liguo, Cui, Yonghui, Jia, Mingyin, Pan, Kai · 2021 · Thin-Walled Structures
Cited by 182

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

A novel 3D printing strategy for continuous glass fiber reinforced polylactic acid (CGF/PLA) composites was proposed. CGF/PLA filament was prepared by a melting impregnation device, and then CGF/PLA filament was directly supplied to the self-modified 3D printing device. The impregnation process was optimized systematically, and the fiber content reached up to 45 wt%. A specific compatibilizer was used and the amount of compatibilizer was optimized to enhance the interfacial bonding between fiber and polymer. The effects of printing parameters such as nozzle diameter, edge width, layer thickness, printing speed and temperature on the mechanical properties and microstructure of the final printed products were studied. The flexural strength and flexural modulus of the printed products reached 312 MPa and 21.5 GPa, respectively. The fabrication strategies proposed in this study can provide a low-cost and high-strength method for the industrial application of 3D printed continuous fiber reinforced thermoplastic composites.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.tws.2021.107717

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Metadata

Authors
Chen, K., Yu, L., Cui, Y., Jia, M., & Pan, K.
Venue
Thin-Walled Structures
Publisher
Elsevier BV
Published
2021-07
Volume
164
Pages
107717
ISSN
0263-8231 (ISSN-L)
OpenAlex
W3158469277
Cited by
182
References
2
FWCI
7.69
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites. https://app.cochat.ai/papers/10.1016/j.tws.2021.107717
The paper
Chen, K., Yu, L., Cui, Y., Jia, M., & Pan, K. (2021). Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites. Thin-Walled Structures. https://doi.org/10.1016/j.tws.2021.107717

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.