The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Incubation pit analysis and calculation of the hydrodynamic impact pressure from the implosion of an acoustic cavitation bubble
Abstract
An experimental study to evaluate cavitation bubble dynamics is conducted. The aim is to predict the magnitude and statistical distribution of hydrodynamic impact pressure generated from the implosion of various individual acoustic cavitation bubbles near to a rigid boundary, considering geometrical features of the pitted area. A steel sample was subjected to cavitation impacts by an ultrasonic transducer with a 5mm diameter probe. The pitted surface was then examined using high-precision 3D optical interferometer techniques. Only the incubation period where surface is plastically deformed without material loss is taken into account. The exposure time was adjusted in the range of 3-60 s to avoid pit overlapping and a special procedure for pit analysis and characterisation was then followed. Moreover, a high-speed camera device was deployed to capture the implosion mechanisms of cavitation bubbles near to the surface. The geometrical characteristics of single incubation pits as well as pit clusters were studied and their deformation patterns were compared. Consequently, a reverse engineering approach was applied in order the hydrodynamic impact pressure from the implosion of an individual cavitation bubble to be determined. The characteristic parameters of the cavitation implosion process such as hydrodynamic impact pressure and liquid micro-jet impact velocity as well as the hydrodynamic severity of the cavitation impacts were quantified. It was found that the length of the hypotenuse of the orthographic projections from the center of the pit, which basically represents the deformed area of the pit, increases with the hydrodynamic impact aggressiveness in a linear rate. Majority of the hydrodynamic impacts were in the range of 0.4-1 GPa while the corresponding micro-jet velocities were found to be in the range of 200-700 m/s. Outcomes of this study, contribute to further understanding the cavitation intensity from the implosion of acoustically generated bubbles and could certainly represent a significant step towards developing more accurate cavitation models.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“When the cavitation bubble collapses sharply, it releases significant energy, creating a microjet that reaches speeds of about 200–700 m/s [166].”
From A comprehensive review of ultrasonic assisted extraction (UAE) for bioactive components: Principles, advantages, equipment, and combined technologies (2023) · cites this paper as [166]
Citations
Cites
Cavitation and Bubble Dynamics
Brennen, C. E. (2013) · Cambridge University Press eBooks · doi:10.1017/cbo9781107338760 · Cited by 3,287
VIII. On the pressure developed in a liquid during the collapse of a spherical cavity
Rayleigh, L. (1917) · The London Edinburgh and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440808635681 · Cited by 3,276
Tabor, D. (2000) · doi:10.1093/oso/9780198507765.001.0001 · Cited by 3,128
Cavitation And Bubble Dynamics
Brennen, C. E. (1995) · doi:10.1093/oso/9780195094091.001.0001 · Cited by 2,463
Collapse of an initially spherical vapour cavity in the neighbourhood of a solid boundary
PLESSET, M. S., & Chapman, R. B. (1971) · Journal of Fluid Mechanics · doi:10.1017/s0022112071001058 · Cited by 1,089
Cavitation erosion by single laser-produced bubbles
Philipp, A., & Lauterborn, W. H. (1998) · Journal of Fluid Mechanics · doi:10.1017/s0022112098008738 · Cited by 1,047
Physics of bubble oscillations
Lauterborn, W. H., & Kurz, T. (2010) · Reports on Progress in Physics · doi:10.1088/0034-4885/73/10/106501 · Cited by 840
Vogel, A., Büsch, S., & Parlitz, U. (1996) · The Journal of the Acoustical Society of America · doi:10.1121/1.415878 · Cited by 776
Mechanisms of impulsive pressure generation and damage pit formation by bubble collapse
TOMITA, Y., & SHIMA, A. (1986) · Journal of Fluid Mechanics · doi:10.1017/s0022112086000745 · Cited by 619
Benjamin, T. B., & Ellis, A. T. (1966) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1966.0046 · Cited by 615
Jet formation in bubbles bursting at a free surface
Duchemin, L., Popinet, S., Josserand, C., et al. (2002) · Physics of Fluids · doi:10.1063/1.1494072 · Cited by 262
Development of a cavitation erosion model
Dular, M., Stoffel, B., & Širok, B. (2006) · Wear · doi:10.1016/j.wear.2006.01.020 · Cited by 233
Tezel, A., & Mitragotri, S. (2003) · Biophysical Journal · doi:10.1016/s0006-3495(03)74770-5 · Cited by 212
Phenomenological Analysis of Plastic Spherical Indentation
Francis, H. A. (1976) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443378 · Cited by 188
Louisnard, O. (2011) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2011.06.007 · Cited by 187
The role of ‘splashing’ in the collapse of a laser-generated cavity near a rigid boundary
Tong, R., Schiffers, W. P., Shaw, S. J., et al. (1999) · Journal of Fluid Mechanics · doi:10.1017/s0022112098003589 · Cited by 183
On the births of jet drops from bubbles bursting on water surfaces
Spiel, D. E. (1995) · Journal of Geophysical Research Atmospheres · doi:10.1029/94jc03055 · Cited by 175
Kodama, T., & TOMITA, Y. (2000) · Applied Physics B · doi:10.1007/s003400050022 · Cited by 172
Braeutigam, P., Franke, M., Schneider, R. J., Lehmann, A., Stolle, A., & Ondruschka, B. (2012) · Water Research · doi:10.1016/j.watres.2012.02.013 · Cited by 142
Material and velocity effects on cavitation erosion pitting
Franc, J.-P., Riondet, M., Karimi, A., et al. (2011) · Wear · doi:10.1016/j.wear.2011.09.006 · Cited by 126
Louisnard, O. (2011) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2011.06.008 · Cited by 126
Petkovšek, R., & Gregorčič, P. (2007) · Journal of Applied Physics · doi:10.1063/1.2774000 · Cited by 112
Observations of cavitation erosion pit formation
Dular, M., Delgosha, O. C., & Petkovšek, M. (2013) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2013.01.011 · Cited by 106
Damages on steel surface at the incubation stage of the vibration cavitation erosion in water
Chen, H., Li, J., Darong, C., et al. (2008) · Wear · doi:10.1016/j.wear.2007.12.011 · Cited by 99
The final stage of the collapse of a cloud of bubbles close to a rigid boundary
Brujan, E., Ikeda, T., Yoshinaka, K., et al. (2010) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2010.07.004 · Cited by 95
Hancox, N. L., & Brunton, J. H. (1966) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1966.0036 · Cited by 79
Cavitation damage measurement by 3D laser profilometry
Patella, R. F., Reboud, J.-L., & Archer, A. (2000) · Wear · doi:10.1016/s0043-1648(00)00446-4 · Cited by 76
Shock wave emission from a cloud of bubbles
Brujan, E., Ikeda, T., & Matsumoto, Y. (2012) · Soft Matter · doi:10.1039/c2sm25379h · Cited by 72
Characterization of acoustic cavitation in water and molten aluminum alloy
Komarov, S. V., Kazuhiro, O. D. A., Ishiwata, Y., et al. (2012) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2012.10.006 · Cited by 71
On acoustic cavitation of slightly subcritical bubbles
(1999) · doi:10.1063/1.869878 · Cited by 63
Enhancement of chloroform degradation by the combination of hydrodynamic and acoustic cavitation
Franke, M., Braeutigam, P., Wu, Z., et al. (2010) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2010.11.011 · Cited by 57
Optical investigation of cavitation erosion by laser-induced bubble collapse
Chen, X., Xu, R., Shen, Z. H., Lü, J., & Ni, X. (2003) · Optics & Laser Technology · doi:10.1016/j.optlastec.2003.08.004 · Cited by 53
Cavitation Erosion – A review of physical mechanisms and erosion risk models
van Terwisga, T. J. C., Fitzsimmons, P. A., Li, Z., et al. (2009) · Cited by 52
Scaling study of cavitation pitting from cavitating jets and ultrasonic horns
Jayaprakash, A., Choi, J.-K., Chahine, G. L., et al. (2012) · Wear · doi:10.1016/j.wear.2012.07.025 · Cited by 49
Inner Structure of Cloud Cavity on a Foil Section.
Kawanami, Y., Kato, H., Yamaguchi, H., et al. (2002) · JSME International Journal Series B · doi:10.1299/jsmeb.45.655 · Cited by 49
Experimental and numerical investigations on development of cavitation erosion pits on solid surface
Haosheng, C., Li, Y., Darong, C., et al. (2007) · Tribology Letters · doi:10.1007/s11249-006-9188-3 · Cited by 45
The interaction of a single laser-generated cavity in water with a solid surface
Shaw, S. J., Jin, Y. H., Schiffers, W. P., et al. (1996) · The Journal of the Acoustical Society of America · doi:10.1121/1.414857 · Cited by 44
Carnelli, D., Karimi, A., & Franc, J.-P. (2011) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2011.259 · Cited by 40
Characterization of incipient cavitation in axial valve by hydrophone and visualization
Osterman, A., Hočevar, M., Širok, B., et al. (2008) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2008.12.008 · Cited by 39
Tzanakis, I., Hadfield, M., & Henshaw, I. (2011) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2011.07.005 · Cited by 38
Self-citationCarnelli, D., Karimi, A., & Franc, J.-P. (2012) · Wear · doi:10.1016/j.wear.2012.04.009 · Cited by 38
Cavitation Damage Studies With Rotating Disk in Water
Wood, G. M., Knudsen, L. K., & Hammitt, F. G. (1967) · Journal of Basic Engineering · doi:10.1115/1.3609577 · Cited by 35
The Joukowsky equation for fluids and solids
Tijsseling, A. S., & Anderson, A. (2006) · doi:10.25405/ncl.34086528 · Cited by 31
The Use of the Cavitation Effect in the Mitigation
Heath, D. E., Širok, B., Hočevar, M., et al. (2013) · Strojniški vestnik – Journal of Mechanical Engineering · doi:10.5545/sv-jme.2012.732 · Cited by 28
Cavitation damage incubation with typical fluids applied to a scroll expander system
Tzanakis, I., Hadfield, M., & Garland, N. P. (2011) · Tribology International · doi:10.1016/j.triboint.2011.06.013 · Cited by 28
Self-citationEffect of hydrodynamic pressures near solid surfaces in the incubation stage of cavitation erosion
Chen, H. S., Wang, J. D., Li, Y. J., et al. (2008) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet384 · Cited by 27
The fiber optic probe hydrophone
Wurster, Staudenraus, & Eisenmenger (1994) · doi:10.1109/ultsym.1994.401697 · Cited by 25
Liquid impact on a bilinear elastic-plastic solid and its role in cavitation erosion
Grant, M., & Lush, P. A. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087000648 · Cited by 24
Jet Formation in Bubbles Bursting at a Free Surface
Duchemin, L., & Zaleski, S. (2002) · doi:10.1115/fedsm2002-31142 · Cited by 22
Williams, P. R., Williams, P. M., & Brown, S. W. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00020-7 · Cited by 15
Cavitation damage observations within scroll expander lubrication systems
Tzanakis, I., Hadfield, M., Georgoulas, A. N., et al. (2010) · WIT transactions on engineering sciences · doi:10.2495/td100221 · Cited by 11
Self-citationCavitation erosion damage of scroll steel plates by high-speed gas working fluid
Tzanakis, I., Georgoulas, A. N., Hadfield, M., et al. (2014) · International Journal of Computational Methods and Experimental Measurements · doi:10.2495/cmem-v2-n2-168-183 · Cited by 4
Self-citationBonnavand, F., Bramley, A. N., & Mynors, D. J. (2001) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/0954405011515271 · Cited by 3
Georgoulas, A. N., Tzanakis, I., Fytanidis, D. K., et al. (2013) · University of Brighton Repository (University of Brighton) · Cited by 1
Self-citation
Research works printed but not linked: 6
- F. Ronald Young, Cavitation, Imperial College Press, 1999. ISBN 1-86094-198-2.
- Benjamin, 1966, “The Collapse of Cavitation Bubbles and the Pressures thereby Produced against Solid Boundaries” Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 260, 221
- M. Hodnett, “Snap, Crackle, or Pop: How Do Bubbles Sound?” Handbook for Critical Cleaning: Cleaning Agents and Systems, second ed., B. Kanegsberg, E. Kanegsberg, (Eds.), CRC Press, 2011.
- Benjamin, 1966, The Collapse of Cavitation Bubbles and the Pressures thereby Produced against Solid Boundaries, Philosophical Transactions of the Royal Society of London A, 260, 221
- Hollomon, 1945, Tensile deformation, AIME Transactions, 12, 1
- Hancox, 1966, The erosion of solids by the repeated impact of liquid drops, Philosophical of Transaction of the Royal Society of London A, 260, 121
Cited by
Sorted by citations
Shen, L., Pang, S., Zhong, M., Sun, Y., Qayum, A., Liu, Y., Rashid, A., Xu, B., Liang, Q., Ma, H., et al. (2023) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2023.106646 · Cited by 892
“When the cavitation bubble collapses sharply, it releases significant energy, creating a microjet that reaches speeds of about 200 – 700 m/s [166].”
Background
Metadata
- Authors
- Tzanakis, I., Eskin, D. G., Georgoulas, A., & Fytanidis, D. K.
- Affiliations
- Brunel University of London (GB)
- University of Bergamo (IT)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Tzanakis, I.
- Venue
- Ultrasonics Sonochemistry
- Publisher
- Elsevier BV
- Published
- 2014-03
- Volume
- 21
- Issue
- 2
- Pages
- 866-878
- ISSN
- 1350-4177 (ISSN-L)
- OpenAlex
- W2005395976
- Cited by
- 185
- References
- 54
- Citations by year
- 2026: 10 · 2025: 22 · 2024: 20 · 2023: 27 · 2022: 16 · 2021: 24 · 2020: 12 · 2019: 14 · 2018: 8 · 2017: 9 · 2016: 10 · 2015: 8 · 2014: 5
- FWCI
- 3.46
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Ultrasonics Sonochemistry (publishedVersion)
- PubMed (publishedVersion)
- University of Brighton Repository (University of Brighton) (submittedVersion)
- Topics
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Physical Sciences › Engineering › Mechanical Engineering › Cavitation Phenomena in Pumps
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Residual Stress
- Keywords
- acoustic cavitation, plastic deformation, pit geometry, reverse engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
