The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Synthesis of magnetic γ-Fe2O3-based nanomaterial for ultrasonic assisted dyes adsorption: Modeling and optimization
Open accessAbstract
γ-Fe2O3 nanoparticles were synthesized and loaded on activated carbon. The prepared nanomaterial was characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transforms infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The γ-Fe2O3 nanoparticle-loaded activated carbon (γ-Fe2O3-NPs-AC) was used as novel adsorbent for the ultrasonic-assisted removal of methylene blue (MB) and malachite green (MG). Response surface methodology and artificial neural network were applied to model and optimize the adsorption of the MB and MG in their individual and binary solutions followed by the investigation on adsorption isotherm and kinetics. The individual effects of parameters such as pH, mass of adsorbent, ultrasonication time as well as MB and MG concentrations in addition to the effects of their possible interactions on the adsorption process were investigated. The numerical optimization revealed that the optimum adsorption (>99.5% for each dye) is obtained at 0.02g, 15mgL(-1), 4min and 7.0 corresponding to the adsorbent mass, each dye concentration, sonication time and pH, respectively. The Freundlich, Langmuir, Temkin and Dubinin-Radushkevich isotherms were studied. The Langmuir was found to be most applicable isotherm which predicted maximum monolayer adsorption capacities of 195.55 and 207.04mgg(-1) for the adsorption of MB and MG, respectively. The pseudo-second order model was found to be applicable for the adsorption kinetics. Blank experiments (without any adsorbent) were run to investigate the possible degradation of the dyes studied in presence of ultrasonication. No dyes degradation was observed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Witek-Krowiak, A., Chojnacka, K., Podstawczyk, D., Dawiec, A., & Bubała, K. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.021 · Cited by 667
Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent
Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500848m · Cited by 580
Cited by
Wang, L., Shi, C., Wang, L., Pan, L., Zhang, X., & Zou, J.-J. (2020) · Nanoscale · doi:10.1039/c9nr09274a · Cited by 523
Zhao, L., Dai, T., Qiao, Z., Sun, P., Hao, J., & Yang, Y. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2019.11.014 · Cited by 440
Recent advances in activated carbon modification techniques for enhanced heavy metal adsorption
Mariana, M., H.P.S., A. K., Mistar, E. M., Yahya, E. B., Alfatah, T., Danish, M., & Amayreh, M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.102221 · Cited by 410
Tackling environmental challenges in pollution controls using artificial intelligence: A review
Ye, Z., Yang, J., Zhong, N., Tu, X., Jia, J., & Wang, J. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.134279 · Cited by 372
Novel approach for effective removal of methylene blue dye from water using fava bean peel waste
Bayomie, O. S., Kandeel, H., Shoeib, T., Yang, H., Youssef, N., & El-Sayed, M. M. H. (2020) · Scientific Reports · doi:10.1038/s41598-020-64727-5 · Cited by 284
Metadata
- Authors
- Asfaram, A., Ghaedi, M., Hajati, S., & Goudarzi, A.
- Venue
- Ultrasonics Sonochemistry
- Publisher
- Elsevier BV
- Published
- 2016-09
- Volume
- 32
- Pages
- 418-431
- ISSN
- 1350-4177 (ISSN-L)
- OpenAlex
- W2315565854
- Cited by
- 209
- References
- 2
- FWCI
- 22.56
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis of magnetic γ-Fe2O3-based nanomaterial for ultrasonic assisted dyes adsorption: Modeling and optimization. https://app.cochat.ai/papers/10.1016/j.ultsonch.2016.04.011
- The paper
- Asfaram, A., Ghaedi, M., Hajati, S., & Goudarzi, A. (2016). Synthesis of magnetic γ-Fe2O3-based nanomaterial for ultrasonic assisted dyes adsorption: Modeling and optimization. Ultrasonics Sonochemistry. https://doi.org/10.1016/j.ultsonch.2016.04.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.