The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Recycling of the product of thermal inertization of cement–asbestos for various industrial applications
Abstract
Recycling of secondary raw materials is a priority of waste handling in the countries of the European community. A potentially important secondary raw material is the product of the thermal transformation of cement-asbestos, produced by prolonged annealing at 1200-1300 °C. The product is chemically comparable to a Mg-rich clinker. Previous work has assured the reliability of the transformation process. The current challenge is to find potential applications as secondary raw material. Recycling of thermally treated asbestos-containing material (named KRY·AS) in traditional ceramics has already been studied with successful results. The results presented here are the outcome of a long termed project started in 2005 and devoted to the recycling of this secondary raw materials in various industrial applications. KRY·AS can be added in medium-high percentages (10-40 wt%) to commercial mixtures for the production of clay bricks, rock-wool glasses for insulation as well as Ca-based frits and glass-ceramics for the production of ceramic tiles. The secondary raw material was also used for the synthesis of two ceramic pigments; a green uvarovite-based pigment [Ca(3)Cr(2)(SiO(4))(3)] and a pink malayaite-based pigment [Ca(Sn,Cr)SiO(5)]. The latter is especially interesting as a substitute for cadmium-based pigments. This work also shows that KRY·AS can replace standard fillers in polypropylene plastics without altering the properties of the final product. For each application, a description and relevant results are presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This thermal treatment varies between raw asbestos and waste, with a higher temperature required for ACW decomposition, reaching 1200 °C [9,34].”
From A Review of Asbestos Bioweathering by Siderophore-Producing Pseudomonas: A Potential Strategy of Bioremediation (2020) · cites this paper as [34]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ambient monitoring of asbestos in selected Italian living areas
Gualtieri, A. F., Mangano, D., Gualtieri, M. L., Ricchi, A., Foresti, E., Lesci, G., Roveri, N., Mariotti, M., & Pecchini, G. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.06.007 · Cited by 41 · cited 2×
“Although slates in good condition with no signs of surface degradation is not necessarily an acute health hazard (Gualtieri et al., 2009), they”
BackgroundSelf-citation
Research works printed but not linked: 20
- Abruzzese, C., Marabini, A.M., Paglietti, F., Plescia, P., 1998. CORDIAM process: A new treatment for asbestos wastes. In: Mishra, B., (Ed.), EPD Congress, DSan Antonio TX USA, TMS Springer, Boston, pp. 563–577.
- Borderes, 2000, Vitrification of the incineration residues, Revue Verre, 6, 1
- Dias, 2008, Long-term aging of fiber-cement corrugated sheets – the effect of carbonation, leaching and acid rain, Cement and Concrete Composites, 30, 255, 10.1016/j.cemconcomp.2007.11.001 · DOI
- Di Prospero, P., Fanghella, P., Ferdenzi, P., Ferri, F., Gaiani, W., 2007. Fibre artificiali vetrose: aspetti generali, classificazione ed etichettatura normativa correlata. In: Arcari, C., Ferri, F. (Eds.), Proceedings “Le fibre artificiali vetrose: classificazione, esposizione, danni per la salute e misure di prevenzione. Risultati di uno studio nazionale”, Reggio Emilia, Italy, 19th april 2007, pp. 13--48 (in Italian).
- Downey A., Timmons D.M., 2005. Study into the applicability of thermochemical conversion technology to legacy asbestos wastes in the UK. In: WM’05, Abstract Conference Book, February 27–March 3, Tucson, AZ, USA.
- Erker, 2002, The thermal conductivity of the brick ceramic body (part 2), Ziegelindustrie International, 55, 32
- Giacobbe, 2010, Spectroscopic study of the product of thermal transformation of chrysotile-asbestos containing materials (ACM), European Journal of Mineralogy, 22, 10.1127/0935-1221/2010/0022-2038 · DOI
- Giantomassi, F., Gualtieri, A.F., Santarelli, L., Tomasetti, M., Lusvardi, G., Lucarini, G., Governa, M., Pugnaloni, A., 2010. Biological effects and comparative cytotoxicity of thermal transformed asbestos-containing materials in a human alveolar epithelial cell line. Toxicology in Vitro. · DOI
- Gualtieri, 2000, Accuracy of XRPD QPA using the combined Rietveld-RIR method, Journal of Applied Crystallography, 33, 267, 10.1107/S002188989901643X · DOI · Paper page
- Gualtieri, A.F., Elmi, G., 2006. Understanding the high temperature reaction sequence during the thermal treatment of cement–asbestos slates. In: Proceedings of the European Conference on Asbestos Risks and Management, ARAM, Rome, 4–6 December, 2006.
- Gualtieri, 2008, The transformation sequence of cement–asbestos slates up to 1200°C and safe recycling of the reaction product in stoneware tile mixtures, Journal of Hazardous Materials, 152, 563, 10.1016/j.jhazmat.2007.07.037 · DOI
- Gualtieri, 2008, KRY AS, materia prima secondaria dal processo di trasformazione termica del cemento-amianto: caratteristiche e proposta di riciclo nel grès porcellanato, Ceramica Informazione, 469, 321
- Lee, 2009, Synthesis of sphene (CaSnSiO5)-pink pigments with CrCl3, Journal of Korean Ceramic Society, 46, 405, 10.4191/KCERS.2009.46.4.405 · doi:10.4191/kcers.2009.46.4.405
- Leonelli, 2006, Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics, Journal of Hazardous Materials, B135, 149, 10.1016/j.jhazmat.2005.11.035 · DOI
- Muñoz, 2004, Environmental study of Cr2O3–Al2O3 green ceramic pigment synthesis, Journal of the European Ceramic Society, 24, 2087, 10.1016/S0955-2219(03)00360-1 · DOI
- Pugnaloni, A., Giantomassi, F., Di Primio, R., Gualtieri, A.F., Giacobbe, C., 2009. In vitro study of the cytotoxic potential of the product of thermal transformation of cement–asbestos. In: VII FIST Conference – Geoitalia 2009, Rimini, Italy, 9–11th September 2009.
- Strazzera, 1997, Composition and ceramic properties of Tertiary clays from southern Sardinia (Italy), Applied Clay Science, 12, 247, 10.1016/S0169-1317(97)00010-0 · DOI
- Toby, 2001, EXPGUI, a graphical user interface for GSAS, Journal of Applied Crystallography, 34, 210, 10.1107/S0021889801002242 · DOI · Paper page
- Torres, 2004, Mechanism of crystallization of pyroxene-based glass–ceramic glazes, Journal of Non Crystalline Solids, 347, 45, 10.1016/j.jnoncrysol.2004.09.003 · DOI
- Torri, G., Gualtieri, A.F., 2007. Use of thermally inertized cement–asbestos for the production of rock/glass wool. Rivista della Stazione Sperimentale del Vetro, pp. 17–24, ISSN: 0391-4259 37(4).
Cited by
David, S. R., & Geoffroy, V. A. (2020) · Microorganisms · doi:10.3390/microorganisms8121870 · Cited by 23
Metadata
- Authors
- Gualtieri, A. F., Giacobbe, C., Sardisco, L., Saraceno, M., Lassinantti Gualtieri, M., Lusvardi, G., Cavenati, C., & Zanatto, I.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2011-01
- Volume
- 31
- Issue
- 1
- Pages
- 91-100
- ISSN
- 0956-053X
- Cited by
- 62
- References
- 1
- Language
- en
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.