The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Preparation of red mud-based geopolymer materials from MSWI fly ash and red mud by mechanical activation
Open accessAbstract
A novel method to activate red mud was proposed in this study. Municipal solid waste incineration fly ash (MSWIFA) and red mud were utilized to prepare red mud-based geopolymer materials (RGM). The hydration characteristics of RGM were studied by X-ray diffraction, scanning electronic microscopy, and Fourier transform infrared spectroscopy. The long-term stability and physical properties of RGM were tested by freeze-thaw cycle, European Community Bureau reference (BCR) and unconfined compressive strength (UCS) tests. Results showed that mechanical activation can not only effectively activate red mud, but also effectively improve the reaction of MSWIFA and red mud. When 14% sodium silicate was added to the binder, the UCS reached 12.75 MPa at 28 days. In the RGM, aluminosilicate was effectively activated by mechanical activation and reacted with calcium ion to form complex hydration products. The activator reacts adequately with activated aluminum to form a high-strength geopolymer. The freeze-thaw cycles and BCR test results also showed that the RGM had long-term stability and the characteristics satisfied the requirements of MU10 fly ash bricks. This study demonstrated that RGM may be utilized in cement composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Rovnaník, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.023 · Cited by 1,020
Workability and strength of coarse high calcium fly ash geopolymer
Chindaprasirt, P., Chareerat, T., & Sirivivatnanon, V. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.002 · Cited by 863
Bauxite residue issues: I. Current management, disposal and storage practices
Power, G., Gräfe, M., & Klauber, C. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.006 · Cited by 746
Comparative study on the characteristics of fly ash and bottom ash geopolymers
Chindaprasirt, P., Jaturapitakkul, C., Chalee, W., & Rattanasak, U. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.023 · Cited by 735
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 651
Resistance of alkali-activated slag concrete to acid attack
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00125-x · Cited by 586
Rowles, M., & O'Connor, B. (2003) · Journal of Materials Chemistry · doi:10.1039/b212629j · Cited by 485
Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?
Pacheco-Torgal, F., Abdollahnejad, Z., Camões, A. F., Jamshidi, M., & Ding, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.017 · Cited by 480
The effects of inorganic salt contamination on the strength and durability of geopolymers
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00239-x · Cited by 479
A review of the characterization and revegetation of bauxite residues (Red mud)
Xue, S., Zhu, F., Kong, X., Wu, C., Huang, L., Huang, N., & Hartley, W. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-015-4558-8 · Cited by 395
Preparation of load-bearing building materials from autoclaved phosphogypsum
Yang, J., Liu, W., Zhang, L., & Xiao, B. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.02.011 · Cited by 295
Phair, J. W., & Van Deventer, J. S. J. (2002) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(02)00013-3 · Cited by 295
Zheng, L., Wang, W., & Shi, Y. (2010) · Chemosphere · doi:10.1016/j.chemosphere.2010.02.018 · Cited by 285
Utilization of red mud derived from bauxite in self-compacting concrete
Liu, R.-X., & Poon, C. S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.049 · Cited by 258
Tchakoute Kouamo, H., Elimbi, A., Mbey, J. A., Ngally Sabouang, C. J., & Njopwouo, D. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.023 · Cited by 229
Zhang, M., El-Korchi, T., Zhang, G., Liang, J., & Tao, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.058 · Cited by 226
Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix
Wongsa, A., Boonserm, K., Waisurasingha, C., Sata, V., & Chindaprasirt, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.147 · Cited by 224
Abbasi, S. M., Ahmadi, H., Khalaj, G., & Ghasemi, B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.06.080 · Cited by 200
Co-disposal of MSWI fly ash and Bayer red mud using an one-part geopolymeric system
Ye, N., Chen, Y., Yang, J., Liang, S., Hu, Y., Xiao, B., Huang, Q., Shi, Y., Hu, J., & Wu, X. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.042 · Cited by 194
Gao, X., Yuan, B., Yu, Q., & Brouwers, H. J. H. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.218 · Cited by 190
Wu, K., Shi, H., & Guo, X. (2011) · Waste Management · doi:10.1016/j.wasman.2011.04.022 · Cited by 177
Zhang, Z., Li, L., Ma, X., & Wang, H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.043 · Cited by 164
Chemical stability of geopolymers containing municipal solid waste incinerator fly ash
Lancellotti, I., Kamseu, E., Michelazzi, M., Barbieri, L., Corradi, A., & Leonelli, C. (2010) · Waste Management · doi:10.1016/j.wasman.2009.09.032 · Cited by 161
Li, Y., Min, X., Ke, Y., Chai, L., Shi, M.-Q., Tang, C., Wang, Q., Liang, Y., Lei, J. H., & Liu, D.-G. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.046 · Cited by 138
Self-citationImmobilization of MSWI fly ash through geopolymerization: Effects of water-wash
Zheng, L., Wang, C., Wang, W., Shi, Y., & Gao, X. (2010) · Waste Management · doi:10.1016/j.wasman.2010.05.015 · Cited by 137
Li, Y., Min, X., Chai, L., Shi, M.-Q., Tang, C., Wang, Q., Liang, Y., Lei, J. H., & Liyang, W.-J. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.07.031 · Cited by 130
Self-citationCement based solidification/stabilization of arsenic-contaminated mine tailings
Choi, W.-H., Lee, S.-R., & Park, J.-Y. (2009) · Waste Management · doi:10.1016/j.wasman.2008.11.008 · Cited by 113
Liu, Y.-N., Guo, Z.-H., Xiao, X.-Y., Wang, S., Jiang, Z.-C., & Zeng, P. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.10.065 · Cited by 76
Cited by
Zhang, Y., Wang, L., Chen, L., Ma, B., Zhang, Y., Ni, W., & Tsang, D. C. W. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125132 · Cited by 532
Brough, D., & Jouhara, H. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2019.100007 · Cited by 413
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Use and applications of metal-organic frameworks (MOF) in dye adsorption: Review
Sağlam, S., Türk, F. N., & Arslanoğlu, H. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.110568 · Cited by 313
Liu, J., Hu, L., Tang, L., & Ren, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123451 · Cited by 311
Metadata
- Authors
- Li, Y., Min, X., Ke, Y., Liu, D., & Tang, C.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 83
- Pages
- 202-208
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W2901873939
- Cited by
- 367
- References
- 30
- FWCI
- 21.11
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.