The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Closing the loop for PET, PE and PP waste from households: Influence of material properties and product design for plastic recycling
Open accessAbstract
Recycling of plastic is an important step towards circular economy. However, plastic from household waste (HHW) is a heterogeneous and contaminated resource, leading to recycled plastic with reduced quality, limiting the potential for closed-loop recycling. In addition to regulatory requirements for the chemical composition of recycled plastic, reduced physical and mechanical properties may limit the potential for closed-loop recycling. Consequently, this study analyses the thermal degradation, processability and mechanical properties of a range of reprocessed PET, PE and PP samples from source-separated plastic in HHW. On this basis, the potential for closed-loop recycling is evaluated. The study demonstrated that PET, PE and PP recycling represent different challenges. Potential degradation of the PET polymer can be reversed in a decontamination process, making PET waste well-suited for closed-loop, multiple times recycling, even when the degree of heterogeneity in the waste is high. The processability of different kinds of PE and PP packaging types varied considerably, especially for PP. Consequently, current recycling of mixed PP waste and even separate recycling of individual PP waste packaging types, will not technically facilitate recycling into new packaging products. This highlights the importance of PE and PP waste homogeneity when sent to reprocessing. Such homogeneity may be achieved through additional plastic sorting and regulatory harmonisation of product design, accounting for polymer properties and recyclability. Degradation of PP during recycling was shown to be substantial, representing another important limitation for PP recycling, necessary to address in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Awaja, F., & Pavel, D. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.02.005 · Cited by 1,045
Twenty years of PET bottle to bottle recycling—an overview
Welle, F. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.009 · Cited by 643 · cited 1×
“…food packaging could theoretically solve this and facilitate closed-loop recycling into new food packaging (Eriksen and Astrup, 2019); an illustrative example is separate collection of PET bever-age bottles through deposit systems with subsequent recycling into new beverage bottles (Welle, 2011).”
Mechanical Properties of Polymers
(2011) · Engineering Design with Polymers and Composites · doi:10.1201/b11597-6 · Cited by 633
Hahladakis, J. N., & Iacovidou, E. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.330 · Cited by 417
Recycling potential of post-consumer plastic packaging waste in Finland
Dahlbo, H., Poliakova, V., Mylläri, V., Sahimaa, O., & Anderson, R. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.033 · Cited by 364
EFSA Panel on food contact materials, E. (2011) · EFSA Journal · doi:10.2903/j.efsa.2011.2184 · Cited by 334
Black plastics: Linear and circular economies, hazardous additives and marine pollution
Turner, A. (2018) · Environment International · doi:10.1016/j.envint.2018.04.036 · Cited by 216
Quality Assessment and Circularity Potential of Recovery Systems for Household Plastic Waste
Eriksen, M. K., Damgaard, A., Boldrin, A., & Astrup, T. F. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12822 · Cited by 211
Self-citation
Research works printed but not linked: 4
- Chariyachotilert, 2006, Properties of recycled plastics from HDPE drinking water bottles, Formerly Kasetsart Journal (Nat. Sci.), 40l
- EC (European Commission), 2008. REGULATION (EC) No 282/2008 of 27 March 2008 on recycled plastic materials and articles intended to come into contact with foods and amending Regulation (EC) No 2023/2006. Official Journal of the European Union, L 86/9-18.
- Klitkou, 2011, Effect of multiple extrusions on the impact properties of polypropylene/clay nanocomposites, J. Appl. Polym. Sci.
- Koyun, 2012, Statistical Evaluation Tensile Properties of High-Density Polyethylenes, Adv. Mater. Res., 10.4028/www.scientific.net/AMR.445.213 · doi:10.4028/www.scientific.net/amr.445.213
Cited by
Mechanical Recycling of Packaging Plastics: A Review
Schyns, Z. O. G., & Shaver, M. P. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202000415 · Cited by 1,643
Ferdous, W., Manalo, A., Siddique, R., Mendis, P., Zhuge, Y., Wong, H. S., Lokuge, W., Aravinthan, T., & Schubel, P. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105745 · Cited by 569
Depolymerization within a Circular Plastics System
Clark, R. A., & Shaver, M. P. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00739 · Cited by 408
Why is recycling of postconsumer plastics so challenging?
Vogt, B. D., Stokes, K. K., & Kumar, S. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00648 · Cited by 385
Antonopoulos, I., Faraca, G., & Tonini, D. (2021) · Waste Management · doi:10.1016/j.wasman.2021.04.002 · Cited by 301
A review of the plastic value chain from a circular economy perspective
Johansen, M. R., Christensen, T. B., Ramos, T. M., & Syberg, K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113975 · Cited by 279
Plastic Waste Recycling─A Chemical Recycling Perspective
Schade, A., Melzer, M., Zimmermann, S., Schwarz, T., Stoewe, K., & Kuhn, H. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c02551 · Cited by 273
Roadmap to Biodegradable Plastics—Current State and Research Needs
Ghosh, K., & Jones, B. H. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c00801 · Cited by 260
Packaging design for the circular economy: A systematic review
Zhu, Z., Liu, W., Ye, S., & Batista, L. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.06.005 · Cited by 204
“A general guideline for circular packaging design is that the number of materials used in the packaging should be kept as minimal (Eriksen et al., 2019).”
BackgroundEriksen, M. K., Pivnenko, K., Faraca, G., Boldrin, A., & Astrup, T. F. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c03435 · Cited by 130
Self-citationTowards Higher Quality of Recycled Plastics: Limitations from the Material’s Perspective
Alassali, A., Picuno, C., Chong, Z. K., Guo, J., Maletz, R., & Kuchta, K. (2021) · Sustainability · doi:10.3390/su132313266 · Cited by 68
“The product design and product type may hinder recycling through the existence of multi-layer and multi-component materials in one product [13,25].”
Background
Metadata
- Authors
- Eriksen, M. K., Christiansen, J. D., Daugaard, A. E., & Astrup, T. F.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 96
- Pages
- 75-85
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W2960506857
- Cited by
- 329
- References
- 26
- FWCI
- 14.96
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Funders
- Danish Environmental Agency
- Technical University of Denmark
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.