The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Adsorption and reduction of chromium(VI) from aqueous solution using polypyrrole/calcium rectorite composite adsorbent
Abstract
Chromate is considered to be a toxic contaminant because of its potential to harm animal and human health. In this study, polypyrrole/calcium rectorite clay composites (PPy/Ca-REC composites) were prepared as a potential adsorbent, via in situ polymerization of pyrrole monomer for adsorption of Cr(VI) from aqueous solution. The XRD results indicated that the clay sheets were exfoliated in the prepared composites. SEM results showed good dispersion of the PPy on the clay sheets. The adsorption of Cr(VI) onto the PPy/Ca-REC adsorbent was highly pH-dependent, and the removal efficiency by PPy/Ca-REC composites was much higher than the PPy homopolymer. Adsorption kinetics followed a pseudo-second-order kinetic model with an equilibrium reached within 30-180 min. The adsorption isotherm data were fitted well by the Langmuir isotherm model with the maximum adsorption capacity of 714.29-833.33 mg/g at 25-45 °C. The PPy/Ca-REC composites could be regenerated and reused for three consecutive adsorption-desorption cycles without loss of the original removal efficiency for Cr(VI) removal. Furthermore, the selective adsorption of Cr(VI) was demonstrated in binary adsorption systems with coexisting ions. The mechanisms of Cr(VI) removal containing electrostatic interactions, ionic interaction as well as reduction of Cr(VI) to Cr(III), which could be observed by the XPS results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heavy metal adsorbents prepared from the modification of cellulose: A review
O’Connell, D. W., Birkinshaw, C., & O’Dwyer, T. F. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.01.036 · Cited by 1,299
Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics
Argun, M. E., Dursun, S., Ozdemir, C., & Karatas, M. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.095 · Cited by 836
Gupta, V. K., Rastogi, A., & Nayak, A. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.09.065 · Cited by 644
Polymer nanocomposites from modified clays: Recent advances and challenges
Kotal, M., & Bhowmick, A. K. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.10.001 · Cited by 634
Wang, T., Lin, J., Chen, Z., Megharaj, M., & Naidu, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.07.006 · Cited by 503
Wang, H., Yuan, X., Wu, Y., Chen, X., Leng, L., Wang, H., Li, H., & Zeng, G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.10.020 · Cited by 468
Hexavalent chromium removal from aqueous solution by adsorption on treated sawdust
Baral, S. S., Das, S. N., & Rath, P. (2006) · Biochemical Engineering Journal · doi:10.1016/j.bej.2006.08.003 · Cited by 378
Mohan, D., Singh, K. P., & Singh, V. K. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0400898 · Cited by 378
Removal of chromium(VI) from aqueous solutions by polymer inclusion membranes
Kozlowski, C. A., & Walkowiak, W. (2002) · Water Research · doi:10.1016/s0043-1354(02)00216-6 · Cited by 342
Unuabonah, E. I., Adebowale, K. O., & Olu-Owolabi, B. I. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.10.046 · Cited by 334
Hexavalent chromium removal from aqueous solution by adsorption on treated sawdust
Afkhami, A. (2006) · Biochemical Engineering Journal · Cited by 274
Mohamed, F., Abukhadra, M. R., & Shaban, M. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.05.316 · Cited by 272
Chromium(VI) removal with activated carbons
Pérez-Candela, M., Martín-Martínez, J., & Torregrosa-Maciá, R. (1995) · Water Research · doi:10.1016/0043-1354(95)00035-j · Cited by 252
Chávez-Guajardo, A. E., Medina-Llamas, J. C., Maqueira, L., Andrade, C. A. S., Alves, K. G. B., & de Melo, C. P. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.07.008 · Cited by 228
Setshedi, K. Z., Bhaumik, M., Songwane, S., Onyango, M. S., & Maity, A. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.02.061 · Cited by 202
Bhaumik, M., Agarwal, S., Gupta, V. K., & Maity, A. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.02.054 · Cited by 201
Kera, N. H., Bhaumik, M., Pillay, K., Ray, S. S., & Maity, A. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.05.018 · Cited by 184
Aigbe, U. O., Das, R., Ho, W. H., Srinivasu, V., & Maity, A. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.11.057 · Cited by 166
Zhou, J., Lü, Q.-F., & Luo, J.-J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.196 · Cited by 158
Lin, J., Zhan, Y., & Zhu, Z. (2011) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2011.02.044 · Cited by 145
Fang, W., Jiang, X., Luo, H., & Geng, J. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.12.163 · Cited by 139
Heavy metal-adsorption on micas and clay minerals studied by X-ray photoelectron spectroscopy
Gier, S. (2000) · Applied Clay Science · doi:10.1016/s0169-1317(00)00004-1 · Cited by 129
Yuan, N., Zhang, G., Guo, S., & Wan, Z. (2015) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2015.06.029 · Cited by 118
Self-citationBaig, U., Rao, R. A. K., Khan, A. A., Sanagi, M. M., & Gondal, M. A. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.031 · Cited by 104
Ballav, N., Choi, H. J., Mishra, S. B., & Maity, A. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.10.008 · Cited by 99
Adsorption of Cr(VI) on STAC-modified rectorite
Hong, H., Jiang, W., Zhang, X., Tie, L., & Li, Z. (2008) · Applied Clay Science · doi:10.1016/j.clay.2008.01.015 · Cited by 99
Potential of biomass for Cr(III) removal from aqueous solutions: Thermodynamic studies
Romero-González, J., Peralta-Videa, J. R., RODRIGUEZ, E., DELGADO, M., & Gardea-Torresdey, J. L. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2005.01.037 · Cited by 94
Removal of chromium (VI) from aqueous solution using treated oil palm fibre
Isa, M. H., Ibrahim, N., Aziz, H. B. A., Adlan, M. N., Sabiani, N. H. M., Zinatizadeh, A. A., & Kutty, S. R. M. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.07.033 · Cited by 82
Biškup, B., & Subotić, B. (2003) · Separation and Purification Technology · doi:10.1016/s1383-5866(03)00220-x · Cited by 82
Li, S., Lu, X., Li, X., Xue, Y., Zhang, C., Lei, J., & Wang, C. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.03.065 · Cited by 80
Adsorption behavior of Cr(VI) on organic-modified rectorite
Huang, Y. Y., Ma, X., Liang, G., Yan, Y., & Wang, S. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.06.017 · Cited by 79
Kera, N. H., Bhaumik, M., Ballav, N., Pillay, K., Ray, S. S., & Maity, A. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.05.011 · Cited by 79
Removal of hexavalent chromium ions from aqueous solution using chitosan/polypyrrole composite
Rathinam, K., & Meenakshi, S. (2014) · Desalination and Water Treatment · doi:10.1080/19443994.2014.951964 · Cited by 73
Ko, Y., Choi, K., Lee, S., Jung, K., Hong, S. W., Mizuseki, H., Choi, J.-W., & Lee, W.-S. (2018) · Water Research · doi:10.1016/j.watres.2018.08.033 · Cited by 67
Chen, J., Hong, X., Xie, Q., Li, D., & Zhang, Q. (2014) · Journal of Chemical & Engineering Data · doi:10.1021/je500319a · Cited by 41
Self-citationApplication of nanometer size of polypyrrole as a suitable adsorbent for removal of Cr(VI)
Katal, R., Ghiass, M., & Esfandian, H. (2011) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.20287 · Cited by 34
Mechanism study of Cr(III) immobilization in the process of Cr(VI) removal by Huolinhe lignite
Zhao, T., Ge, W., Yue, F., Wang, Y., Pedersen, C. M., Zeng, F., & Qiao, Y. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.06.037 · Cited by 33
Kinetics of chromium(VI) adsorption from model solutions on iron oxide
Goshu, I. V., Tsarev, Y. V., & Kostrov, V. V. (2009) · Russian Journal of Applied Chemistry · doi:10.1134/s1070427209050097 · Cited by 16
Cited by
Adsorption of heavy metal ions by various low-cost adsorbents: a review
Chakraborty, R., Asthana, A., Singh, A. K., Jain, B., & Susan, A. B. H. (2022) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2020.1722811 · Cited by 659
Sun, C., Wang, Z., Chen, L., & Li, F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124796 · Cited by 407
Abidli, A., Huang, Y., Ben Rejeb, Z., Zaoui, A., & Park, C. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133102 · Cited by 194
Xing, X., Alharbi, N. S., Ren, X., & Chen, C. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.107325 · Cited by 79
Metadata
- Authors
- Xu, Y., Chen, J., Chen, R., Yu, P., Guo, S., & Wang, X.
- Venue
- Water Research
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 160
- Pages
- 148-157
- ISSN
- 0043-1354 (ISSN-L)
- OpenAlex
- W2946795842
- Cited by
- 334
- References
- 38
- FWCI
- 14.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.