The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
A deep learning method for bearing fault diagnosis based on Cyclic Spectral Coherence and Convolutional Neural Networks
Open accessAbstract
Abstract Accurate fault diagnosis is critical to ensure the safe and reliable operation of rotating machinery. Data-driven fault diagnosis techniques based on Deep Learning (DL) have recently gained increasing attention due to theirs powerful feature learning capacity. However, one of the critical challenges lies in how to embed domain diagnosis knowledge into DL to obtain suitable features that correlate well with the health conditions and to generate better predictors. In this paper, a novel DL-based fault diagnosis method, based on 2D map representations of Cyclic Spectral Coherence (CSCoh) and Convolutional Neural Networks (CNN), is proposed to improve the recognition performance of rolling element bearing faults. Firstly, the 2D CSCoh maps of vibration signals are estimated by cyclic spectral analysis to provide bearing discriminative patterns for specific type of faults. The motivation for using CSCoh-based preprocessing scheme is that the valuable health condition information can be revealed by exploiting the second-order cyclostationary behavior of bearing vibration signals. Thus, the difficulty of feature learning in deep diagnosis model is reduced by leveraging domain-related diagnosis knowledge. Secondly, a CNN model is constructed to learn high-level feature representations and conduct fault classification. More specifically, Group Normalization (GN) is employed in CNN to normalize the feature maps of network, which can reduce the internal covariant shift induced by data distribution discrepancy. The proposed method is tested and evaluated on two experimental datasets, including data category imbalances and data collected under different operating conditions. Experimental results demonstrate that the proposed method can achieve high diagnosis accuracy under different datasets and present better generalization ability, compared to state-of-the-art fault diagnosis techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
(2008) · Journal of Machine Learning Research · Cited by 33,051
Wu, Y., & He, K. (2020) · International Journal of Computer Vision · doi:10.1007/s11263-019-01198-w · Cited by 3,601
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Self-citationSmith, W. A., & Randall, R. B. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.021 · Cited by 2,719
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Zhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710
Zhang, W., Li, C., Peng, G., Chen, Y., & Zhang, Z. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.022 · Cited by 1,421
Cited by
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Self-citationA review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Li, T., Zhou, Z., Li, S., Sun, C., Yan, R., & Chen, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108653 · Cited by 673
Hakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Metadata
- Authors
- Chen, Z., Mauricio, A., Li, W., & Gryllias, K.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 140
- Pages
- 106683
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W3008309516
- Cited by
- 470
- References
- 44
- FWCI
- 35.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A deep learning method for bearing fault diagnosis based on Cyclic Spectral Coherence and Convolutional Neural Networks. https://app.cochat.ai/papers/10.1016/j.ymssp.2020.106683
- The paper
- Chen, Z., Mauricio, A., Li, W., & Gryllias, K. (2020). A deep learning method for bearing fault diagnosis based on Cyclic Spectral Coherence and Convolutional Neural Networks. Mechanical Systems and Signal Processing. https://doi.org/10.1016/j.ymssp.2020.106683
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.