The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Physics-Informed Residual Network (PIResNet) for rolling element bearing fault diagnostics
Open accessAbstract
Various deep learning methodologies have recently been developed for machine condition monitoring recently, and they have achieved impressive success in bearing fault diagnostics. Despite the capability of effectively diagnosing bearing faults, most deep learning methods are tremendously data-dependent, which is not always available in industrial applications. In practical engineering, bearings are usually installed in rotating machinery where speed and load variations frequently occur, resulting in difficulty in collecting large training datasets under all operating conditions. Additionally, physical information is usually ignored in most deep learning algorithms, which sometimes leads to the generated results of low compliance with the physical law. To tackle these challenges, a novel Physics-Informed Residual Network (PIResNet) is proposed for learning the underlying physics that is embedded in both training and testing data, thus providing a physical consistent solution for imperfect data. In the proposed method, a physical modal-property-dominant-generated layer is adopted at first to generate the modal-property-dominant feature. Then, a domain-conversion layer is constructed to enable the feasibility of extracting the discriminative bearing fault features under varying operating speed conditions. Lastly, a parallel bi-channel residual learning architecture that can automatically extract the bearing fault signatures is meticulously established to incorporate the bearing fault characteristics. Experimental datasets under variable operating speeds and loads, and time-varying operating speeds are utilized to demonstrate the superiority of the PIResNet under non-stationary operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Raissi, M., Perdikaris, P., & Karniadakis, G. E. (2019) · Journal of Computational Physics · doi:10.1016/j.jcp.2018.10.045 · Cited by 20,384
Physics-informed machine learning
Karniadakis, G. E., Kevrekidis, I. G., Lu, L., Perdikaris, P., Wang, S., & Yang, L. (2021) · Nature Reviews Physics · doi:10.1038/s42254-021-00314-5 · Cited by 8,718
Discrete-time Signal Processing
Williamson, D. (1999) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0541-1 · Cited by 4,858
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997 · cited 1×
“Besides incorporating fault-mechanism-based professional knowledge, machine learning-based methodologies, including k-nearest neighbours, random forest, decision tree, support vector machine, etc., have increasingly been focused for bearing fault detection and/or isolation [7].”
MethodSelf-citationZhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Physics-Informed Neural Networks with Hard Constraints for Inverse Design
Lu, L., Pestourie, R., Yao, W., Wang, Z., Verdugo, F., & Johnson, S. G. (2021) · SIAM Journal on Scientific Computing · doi:10.1137/21m1397908 · Cited by 771
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Physics-informed machine learning: case studies for weather and climate modelling
Kashinath, K., Mustafa, M., Albert, A., Wu, J.-L., Jiang, C., Esmaeilzadeh, S., Azizzadenesheli, K., Wang, R., Chattopadhyay, A., Singh, A., et al. (2021) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2020.0093 · Cited by 662
Cited by
A comprehensive review of model compression techniques in machine learning
Dantas, P. V., Sabino da Silva, W., Cordeiro, L. C., & Carvalho, C. B. (2024) · Applied Intelligence · doi:10.1007/s10489-024-05747-w · Cited by 261
Metadata
- Authors
- Ni, Q., Ji, J. C., Halkon, B., Feng, K., & Nandi, A. K.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2023-10
- Volume
- 200
- Pages
- 110544
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W4383337188
- Cited by
- 335
- References
- 35
- FWCI
- 36.42
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Physics-Informed Residual Network (PIResNet) for rolling element bearing fault diagnostics. https://app.cochat.ai/papers/10.1016/j.ymssp.2023.110544
- The paper
- Ni, Q., Ji, J. C., Halkon, B., Feng, K., & Nandi, A. K. (2023). Physics-Informed Residual Network (PIResNet) for rolling element bearing fault diagnostics. Mechanical Systems and Signal Processing. https://doi.org/10.1016/j.ymssp.2023.110544
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.