The DOI matches its Crossref record.
Mineral admixtures in mortarsQuantification of the physical effects of inert materials on short-term hydration
Open accessAbstract
This work is the second part of an overall project, the aim of which is the development of general mix design rules for concrete containing different kinds of mineral admixtures. The first part presented the separation of the different physical effects responsible for changes in cement hydration when chemically inert quartz powders are used in mortars. This second part describes the development of an empirical model, based on semiadiabatic calorimetry measurements, which leads to the quantification of the enhancement of cement hydration due to the heterogeneous nucleation effect at short hydration times. Experimental results show that not all the admixture particles participate in the heterogeneous nucleation process. Consequently, the concept of efficient surface Seff is introduced in the model. Seff is the total admixture surface S (m2 of mineral admixture/kg of cement) weighted by a function ξ(p). The efficiency function ξ(p) depends only on the replacement rate p and is independent of time, fineness and type of mineral admixture used. It decreases from 1 to 0: Low replacement rates give an efficiency value near 1, which means that all admixture particles enhance the hydration process. An efficiency value near 0 is obtained for high replacement rates, which indicates that, from the hydration point of view, an excess of inert powder does not lead to an increase in the amount of hydrates compared with the reference mortar without mineral admixture. The empirical model, which is mainly related to the specific surface area of the admixtures, quantifies the variation of the degree of hydration induced by the use of inert mineral admixtures. One application of the model, coupled with Powers' law, is the prediction of the short-term compressive strength of mortars.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Understanding the Filler Effect on the Nucleation and Growth of C‐S‐H
Berodier, E., & Scrivener, K. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13177 · Cited by 882
Deboucha, W., Leklou, N., Khelidj, A., & Oudjit, M. N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.132 · Cited by 461
Green concrete: Prospects and challenges
Liew, K. M., Sojobi, A. O., & Zhang, L. W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.008 · Cited by 384
Cyr, M., Lawrence, P., & Ringot, E. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.07.001 · Cited by 364
Self-citation
Metadata
- Authors
- CYR, M., LAWRENCE, P., & RINGOT, E.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2005-04
- Volume
- 35
- Issue
- 4
- Pages
- 719-730
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2080071995
- Cited by
- 172
- References
- 0
- FWCI
- 7.75
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mineral admixtures in mortarsQuantification of the physical effects of inert materials on short-term hydration. https://app.cochat.ai/papers/10.1016/s0008-8846(04)00233-9
- The paper
- CYR, M., LAWRENCE, P., & RINGOT, E. (2005). Mineral admixtures in mortarsQuantification of the physical effects of inert materials on short-term hydration. Cement and Concrete Research. https://doi.org/10.1016/s0008-8846(04)00233-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.