The DOI matches its Crossref record.
Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“As pointed out by Wang et al. [13], e -NTU relations depend on the circuitry arrangement, the reduced data are only meaningful if the investigators use correct e -NTU relations to reduce their test results.”
From Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation (2000) · cites this paper as [13]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 10
- Y.J. Chang, C.C. Wang, A generalized heat transfer correlation for louver fin geometry, Int. J. Heat Mass Transfer 40 (3) (1998) 533–544. · DOI · Paper page
- W.R. Chang, C.C. Wang, W.C. Tsi, R.J. Shyu, Air side performance of louver fin heat exchanger, in: Proceedings of the Fourth ASME/JSME Thermal Engineering Joint Conference, vol. 4, 1995, pp. 367–372.
- C.C. Wang, Y.P. Chang, K.U. Chi, Y.J. Chang, An experimental study of heat transfer and friction characteristics of typical louver fin and tube heat exchangers, Int. J. Heat Mass Transfer 41 (4–5) (1998) 817–822. · DOI
- C.C. Wang, Y.P. Chang, K.U. Chi, Y.J. Chang, A study of non-redirection louver fin-and-tube heat exchangers, in: Proceedings of the Institute of Mechanical Engineering, Part C, J. Mech. Eng. Sci. 212 (1998) 1–14. · DOI
- C.C. Wang, C.J. Lee, C.T. Chang, Some aspects of the fin-and-tube heat exchangers: with and without louvers, J. Enhanced Heat Transfer 1998, in press. · DOI
- K.U. Chi, C.C. Wang, Y.J. Chang, Y.P. Chang, A comparison study of compact plate fin-and-tube exchanger, ASHRAE Trans. 1998, in press.
- F.C. McQuiston, J.D. Parker, Heating, Ventilating, and Air-conditioning, 4th ed., John Wiley and Sons Inc., 1994, Chap. 14, p. 571.
- ESDU 86018, Engineering Science Data Unit 86018 with Amendment A, ESDU International plc, London, July 1991, pp. 92–107.
- W.M. Kays, A.L. London, Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York, 1984.
- C.C. Wang, Y.J. Chang, Y.C. Hsieh, Y.T. Lin, Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins, Int. J. Refrig. 19 (4) (1996) 223–230. · DOI · Paper page
Cited by
Sorted by citations
Wang, C.-C., Chi, K.-Y., & Chang, C.-J. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00333-6 · Cited by 464
Self-citationWang, C.-C., & Chi, K.-Y. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00332-4 · Cited by 274
Self-citationHeat transfer enhancement in fin-and-tube heat exchangers – A review on different mechanisms
Sadeghianjahromi, A., & Wang, C.-C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110470 · Cited by 240
Self-citationHe, Y.-L., Han, H., Tao, W.-Q., & Zhang, Y. (2012) · doi:10.1016/j.ijheatmasstransfer.2012.04.059 · Cited by 177
A comparative study of compact enhanced fin-and-tube heat exchangers
Wang, C., Lee, W.-S., & Sheu, W. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00011-4 · Cited by 161
Self-citationQasem, N. A. A., & Zubair, S. M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.104 · Cited by 134
Heat-transfer enhancement in fin-and-tube heat exchanger with improved fin design
Wen, M.-Y., & Ho, C. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.05.019 · Cited by 133
Hu, M.-M., & Xiao, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.036 · Cited by 125
Transient modeling of a flash tank vapor injection heat pump system – Part I: Model development
Qiao, H.-T., Aute, V., & Radermacher, R. (2015) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.06.019 · Cited by 125
Chen, W. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.07.018 · Cited by 112
An investigation of the airside performance of the slit fin-and-tube heat exchangers.
Wang, C.-C., Tao, W., & Chang, C.-J. (1999) · International Journal of Refrigeration · doi:10.1016/s0140-7007(99)00031-6 · Cited by 120
Self-citationHan, H., He, Y.-Y., Li, Y.-S., Wang, Y., & Wu, M. C. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.06.049 · Cited by 119
Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators
Huisseune, H., Tjoen, C., Jaeger, P. D., Ameel, B., de Schampheleire, S., & Paepe, M. D. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.09.004 · Cited by 115
Huisseune, H., de Schampheleire, S., Ameel, B., & Paepe, M. D. (2015) · doi:10.1016/j.ijheatmasstransfer.2015.05.013 · Cited by 114
Leu, J.-S., Liu, M.-S., Liaw, J.-S., & Wang, C.-C. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00081-3 · Cited by 104
Self-citationFarajollahi, A., Vaferi, K., & Baharvand, M. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105302 · Cited by 103
Wang, C., Chen, K., Liaw, J.-S., & Tseng, C.-Y. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.030 · Cited by 98
Self-citationThe Effect of Nanofluid Concentration on the Cooling System of Vehicles Radiator
Ali, M., El-Leathy, A., & Al-Sofyany, Z. (2014) · doi:10.1155/2014/962510 · Cited by 100
“[8, 9] have showed that for louver fin-and-tube heat exchanger configuration, the heat transfer characteristics for multirow coils may benefit from using smaller heat transfer tube especially for frontal velocity of 1.”
BackgroundHeat and momentum transfer for compact louvered fin-and-tube heat exchangers in wet conditions
Wang, C.-C., Lin, Y.-T., & Lee, C.-J. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00375-0 · Cited by 98
Self-citationAn evaluation of options for replacing HCFC-22 in medium temperature refrigeration systems
Spatz, M. W., & Motta, S. Y. (2004) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2004.02.009 · Cited by 76
Walraven, D., Laenen, B., & D'Haeseleer, W. (2015) · doi:10.1016/j.energy.2014.11.048 · Cited by 90
Effectiveness-ntu computation with a mathematical model for cross-flow heat exchangers
Navarro, H. A., & Cabezas-Gómez, L. (2007) · doi:10.1590/s0104-66322007000400005 · Cited by 87
“Recently, several projects to study and determine overall compact heat exchanger thermal performance have been developed (for example Wang et al., 1999a,b; Jang et al., 1998, among others).”
BackgroundNumerical investigation of fluid flow and heat transfer over louvered fins in compact heat exchanger
Malapure, V. P., Mitra, S., & Bhattacharya, A. (2007) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2006.04.010 · Cited by 85
EFFECT OF INCLINED VORTEX GENERATORS ON HEAT TRANSFER ENHANCEMENT IN A THREE-DIMENSIONAL CHANNEL
Sohankar, A., & Davidson, L. (2001) · doi:10.1080/10407780121572 · Cited by 82
Chung, Y., Yoo, J. W., Kim, G. T., & Kim, M. S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.085 · Cited by 81
Mao, J.-N., Chen, H.-X., Jia, H., Wang, Y.-J., & Hu, H.-T. (2013) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.06.001 · Cited by 72
Schampheleire, S. D., Jaeger, P. D., Huisseune, H., Ameel, B., T’Joen, C., Kerpel, K. D., & Paepe, M. D. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.09.027 · Cited by 70
Ye, H.-Y., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.08.026 · Cited by 70
Heat transfer analysis of fin-and-tube heat exchangers with flat and louvered fin geometries
Čarija, Z., Franković, B., Perčić, M., & Čavrak, M. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.05.026 · Cited by 70
Okbaz, A., Pınarbaşı, A., & Olcay, A. (2020) · International journal of thermal sciences · doi:10.1016/j.ijthermalsci.2019.106256 · Cited by 67
Kærn, M. R., Brix, W., Elmegaard, B., & Larsen, L. (2011) · doi:10.1016/j.ijrefrig.2010.12.010 · Cited by 67
Modeling non-uniform frost growth on a fin-and-tube heat exchanger
Padhmanabhan, S. K., Fisher, D. E., Cremaschi, L., & Moallem, E. (2011) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.06.005 · Cited by 66
Huisseune, H., Tjoen, C., Jaeger, P. D., Ameel, B., de Schampheleire, S., & Paepe, M. D. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.10.016 · Cited by 65
“In modern heat exchangers this is done through a transition of the angled louvers to a flat fin surface (the so called landing), which is then connected to the tubes through mechanical or hydraulic expansion [9].”
MethodWang, C., Liaw, J.-S., & Yang, B.-C. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.11.038 · Cited by 61
“[17]) as well as some highly interrupted fin-and-tube heat exchangers like louver, slit, and convex louver [5,18–19] did not reveal this kind of behaviour.”
BackgroundSelf-citationLee, M., Kim, Y., Lee, H., & Kim, Y. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.047 · Cited by 66
Xu, X.-G., Zhong, Z.-W., Deng, S., & Zhang, X. (2018) · doi:10.1016/j.enbuild.2017.12.038 · Cited by 62
Kim, D. K., Min, H. E., Kong, I. M., Lee, M. K., Lee, C. H., Kim, M. S., & Song, H. H. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.07.218 · Cited by 59
Self-citationZhan, F., Tang, J., Ding, G., & Zhuang, D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.136 · Cited by 59
Okbaz, A., Pınarbaşı, A., Olcay, A. B., & Aksoy, M. H. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.127 · Cited by 59
Zhang, P., Ma, T., Li, W.-D., Ma, G., & Wang, Q.-W. (2018) · Energy · doi:10.1016/j.energy.2018.06.216 · Cited by 57
Sadeghianjahromi, A., Kheradmand, S., & Nemati, H. (2018) · International journal of thermal sciences · doi:10.1016/j.ijthermalsci.2018.03.002 · Cited by 57
A numerical model for the dynamic simulation of a recirculation single-effect absorption chiller
Zinet, M., Rullière, R., & Haberschill, P. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.04.007 · Cited by 53
Li, W., & Sun, J. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.030 · Cited by 57
Zheng, X., Yang, R., Wang, Q., Yan, Y., Zhang, Y., Fu, J., & Liu, Z. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119263 · Cited by 59
Thermal performance investigation in a novel corrugated plate heat exchanger
Zahrani, S. A., Islam, M. S., Xu, F., & Saha, S. (2020) · doi:10.1016/j.ijheatmasstransfer.2019.119095 · Cited by 52
Numerical simulation of heat transfer and fluid flow characteristics of composite fin
Wu, X.-H., Zhang, W., Gou, Q.-P., Luo, Z.-M., & Lu, Y. (2014) · doi:10.1016/j.ijheatmasstransfer.2014.03.087 · Cited by 49
Luo, X.-L., Yi, Z.-Q., Zhang, B.-J., Mo, S.-P., Wang, C., Song, M., & Chen, Y. (2017) · doi:10.1016/j.apenergy.2015.12.073 · Cited by 48
Self-citationDevelopment of a dynamic model for a DX VAV air conditioning system
Chen, W., & Deng, S. (2006) · doi:10.1016/j.enconman.2006.03.032 · Cited by 47
Generalized heat-transfer and fluid-flow correlations for corrugated louvered fins
Ryu, K., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.12.044 · Cited by 46
Refrigerant circuitry design of fin-and-tube condenser based on entropy generation minimization
Ye, H.-Y., & Lee, K.-S. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2012.03.013 · Cited by 42
Pirompugd, W., Wongwises, S., & Wang, C.-C. (2005) · Heat and Mass Transfer · doi:10.1007/s00231-004-0581-x · Cited by 45
“[24, 25] reported a negligible effect of fin pitch even for N=1 or 2.”
BackgroundSelf-citationPirompugd, W., Wang, C., & Wongwises, S. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.10.019 · Cited by 45
Self-citationZilio, C., Cecchinato, L., Corradi, M., & Schiochet, G. (2007) · Science and Technology for the Built Environment · doi:10.1080/10789669.2007.10390965 · Cited by 44
“The consistency of the ηoho experimental values obtained through Equations 11 and 12 was evaluated by comparison with the (ηoho)calc values calculated according to the Wang et al. (1999) model.”
BackgroundMethodSun, L., Yang, L., Shao, L.-L., & Zhang, C.-L. (2015) · doi:10.1016/j.ijthermalsci.2014.11.017 · Cited by 39
Sulfuric acid deposition characteristics of H-type finned tube bank with 10 rows
He, Y.-L., Han, H., Tang, S.-Z., & Zhou, T. (2015) · doi:10.1016/j.ijheatmasstransfer.2014.10.013 · Cited by 39
Kalaiselvam, S., Karthik, P., & Prakash, S. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.09.010 · Cited by 39
Yang, K.-S., Chiang, C., Lin, Y.-T., Chien, K.-H., & Wang, C.-C. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.11.047 · Cited by 39
Self-citationKo, Y. M., Song, J. Y., Lee, J. W., Sohn, S., Song, C. H., Khoshvaght-Aliabadi, M., Kim, Y., & Kang, Y. T. (2023) · Energy · doi:10.1016/j.energy.2023.129609 · Cited by 43
Sim, J., Lee, H., & Jeong, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116741 · Cited by 37
Chung, Y., Na, S., Choi, J., & Kim, M. S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.002 · Cited by 36
Method for determining the optimum number of circuits for a fin-tube condenser in a heat pump
Lee, W., Kim, H. J., & Jeong, J. H. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.02.094 · Cited by 41
Jeong, C., Kim, H., Ha, M., Son, S., Lee, J., & Kim, P. Y. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.09.044 · Cited by 36
Yan, P., Xu, X.-G., Liang, X., & Deng, S.-M. (2012) · doi:10.1016/j.applthermaleng.2012.01.006 · Cited by 36
Mean flow and thermo-hydraulic behaviour in inclined louvered fins
Tjoen, C., Huisseune, H., Canière, H., Steeman, H. J., Willockx, A., & Paepe, M. D. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.10.020 · Cited by 36
“[16]).”
Detailed dynamic refrigerant migration characteristics in room air-conditioner with R290.
Liang, J.-R., & Li, T.-X. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.12.013 · Cited by 35
An advanced switching moving boundary heat exchanger model with pressure drop
Qiao, H.-T., Laughman, C., Aute, V., & Radermacher, R. (2016) · doi:10.1016/j.ijrefrig.2016.01.026 · Cited by 35
Pongsoi, P., Pikulkajorn, S., & Wongwises, S. (2012) · doi:10.1080/01457632.2012.692296 · Cited by 34
Lee, Y.-T., Chien, L., He, J.-C., Wen, C., & Yang, A. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119220 · Cited by 33
Compensation of flow maldistribution in fin-and-tube evaporators for residential air-conditioning
Kærn, M. R., Brix, W., Elmegaard, B., & Larsen, L. (2011) · doi:10.1016/j.ijrefrig.2011.03.011 · Cited by 33
“For example in studies by Yashar et al. (2008) and AbdelAziz et al.”
ResultSimulation investigation on inlet velocity profile and configuration parameters of louver fin
Qian, Z.-Q., Wang, Q., Cheng, J.-L., & Deng, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.009 · Cited by 32
Lee, M. S., Li, Z., Ling, J., & Aute, V. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.11.094 · Cited by 29
Thermal enhancement of fin and tube heat exchanger with guiding channels and topology optimisation
Sun, C., Lewpiriyawong, N., Khoo, K. L., Zeng, S., & Lee, P. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.093 · Cited by 31
Thermo-hydraulic characterization of a louvered fin and flat tube heat exchanger
Cuevas, C., Makaire, D., Dardenne, L., & Ngendakumana, P. (2011) · doi:10.1016/j.expthermflusci.2010.08.015 · Cited by 31
Effect of inclination angle on free convection thermal performance of louver finned heat exchanger
Nuntaphan, A., Vithayasai, S., Kiatsiriroat, T., & Wang, C.-C. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.06.008 · Cited by 31
“The effect of the number of tube row on the heat transfer performance of louver fin geometry surface is negligible either for a flat tube geometry [1–7] or for a round tube configuration [11,12].”
BackgroundSelf-citationBezaatpour, M., Rostamzadeh, H., Bezaatpour, J., & Ebadollahi, M. (2021) · doi:10.1016/j.powtec.2020.09.010 · Cited by 30
Javaherdeh, K., Vaisi, A., Moosavi, R., & Esmaeilpour, M. (2017) · doi:10.1115/1.4035449 · Cited by 30
Performance analysis of a compound heat exchanger by screening its design parameters
Huisseune, H., Tjoen, C., Jaeger, P. D., Ameel, B., de Schampheleire, S., & Paepe, M. D. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.09.044 · Cited by 30
Interaction effects between parameters in a vortex generator and louvered fin compact heat exchanger
Ameel, B., Degroote, J., Huisseune, H., Vierendeels, J., & Paepe, M. D. (2014) · doi:10.1016/j.ijheatmasstransfer.2014.04.073 · Cited by 29
Park, H., Nam, K., Jang, G., & Kim, M. S. (2014) · doi:10.1016/j.enbuild.2014.05.052 · Cited by 29
Generalized air-side friction and heat transfer correlations for wavy-fin compact heat exchangers
Qasem, N., & Zubair, S. (2019) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2018.09.010 · Cited by 29
Forced convective heat transfer optimization of plate-fin heat sink with insert-induced turbulence
Su, M.-H., Teh, A., Ooi, E., Chew, I., & Foo, J. J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114066 · Cited by 28
Numerical analysis of the influence of circuit arrangement on a fin-and-tube condenser performance
Joppolo, C. M., Molinaroli, L., & Pasini, A. (2015) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2015.09.002 · Cited by 30
“(12) is calculated according to the following formulation [17] and using appropriate correlation [25,27,24] to estimate the friction factor parameter depending on fin shape and tube arrangement: ⎡ ⎣ ⎢⎢ ⎛ ⎝⎜ ⎞ ⎠⎟ ⎤ ⎦ ⎥⎥ p G f A A 2 1 1 13 AIR FRIC IN TOT MIN IN AVE IN OUT , 2 2 Δ ρ ρ ρ σ ρ ρ = + ( + ) − ( )”
MethodOn fin efficiency in interrupted fin and tube heat exchangers
Ameel, B., Huisseune, H., Degroote, J., Tjoen, C., Jaeger, P. D., Vierendeels, J., & Paepe, M. D. (2013) · doi:10.1016/j.ijheatmasstransfer.2013.01.028 · Cited by 28
Intelligent control of electric vehicle air conditioning system based on deep reinforcement learning
He, L., Li, P.-P., Zhang, Y., Jing, H., & Gu, Z. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122817 · Cited by 27
Jeon, Y., Lee, S.-H., Kim, W., Jung, J., & Kim, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.115 · Cited by 27
Performance Prediction of Compact Fin-and-Tube Heat Exchangers in Maldistributed Airflow
Tjoen, C., Willockx, A., Steeman, H.-J., & Paepe, M. D. (2007) · doi:10.1080/01457630701483570 · Cited by 27
Modeling and Performance Simulation of a Gas Cooler for a CO2 Heat Pump System
Chang, Y., & Kim, M. (2007) · doi:10.1080/10789669.2007.10390964 · Cited by 27
“As shown in Figure 8, according to the design parameters of the heat exchanger, variations in the heat transfer coefficient and fin efficiency are predicted using the heat transfer model of Wang et al. (1999).”
MethodLi, Z., Shen, B., & Gluesenkamp, K. R. (2021) · doi:10.1016/j.ijrefrig.2021.01.003 · Cited by 26
Kotçioğlu, İ., Khalaji, M., & Cansiz, A. (2018) · doi:10.1016/j.applthermaleng.2017.12.120 · Cited by 26
Ameel, B., Degroote, J., T’Joen, C., Jaeger, P. D., Huisseune, H., Schampheleire, S. D., Vierendeels, J., & Paepe, M. D. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.04.016 · Cited by 25
Yi, Z.-Q., Luo, X.-L., Chen, J.-Y., & Chen, Y. (2017) · doi:10.1016/j.energy.2017.08.060 · Cited by 24
Heat transfer performance variations of condensers due to non-uniform air velocity distributions
Lee, W.-J., & Jeong, J. (2016) · doi:10.1016/j.ijrefrig.2016.05.009 · Cited by 24
A comparison of transient heat pump cycle models using alternative flow descriptions
Laughman, C., Qiao, H.-T., Aute, V., & Radermacher, R. (2015) · doi:10.1080/23744731.2015.1040342 · Cited by 24
“…heat exchanger are defined with different heat transfer coefficients and pressure Air-side forced convection heat transfer and pressure drop (dry) Wang et al. (1999) Air-side forced convection heat transfer and pressure drop (wet) Wang et al. (2000) Refrigerant-side single-phase heat…”
BackgroundKærn, M. R., Elmegaard, B., & Larsen, L. (2013) · doi:10.1016/j.ijrefrig.2012.10.006 · Cited by 24
Analysis and optimization of the curved trapezoidal winglet geometry in a compact heat exchanger
Sarangi, S., Mishra, D., Ramachandran, H., Anand, N., Masih, V., & Brar, L. S. (2021) · doi:10.1016/j.applthermaleng.2020.116088 · Cited by 23
Numerical study of the air flow through an air-conditioning unit on high-speed trains
Li, X., Wu, F., Tao, Y., Yang, M.-Z., Newman, R., & Vainchtein, D. (2019) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2019.01.015 · Cited by 23
Li, X., Li, Z., & Tao, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.076 · Cited by 26
Pooranachandran, K., Ali, K., Narasingamurthi, K., & Ramalingam, V. (2012) · doi:10.2298/tsci120220146p · Cited by 23
“[14] presented generalized heat transfer and friction correlations for louver fin geometry having a round tube configuration.”
BackgroundXia, Y.-D., Zhu, M.-A., Jiang, A., Wang, J., Bai, X.-S., & Deng, S. (2022) · Building Simulation · doi:10.1007/s12273-022-0949-1 · Cited by 22
“The air side heat transfer coefficient for dry cooling, αdry, could be evaluated from the CCWang correlations (Wang et al. 1999).”
BackgroundLi, X., Mu, Y.-T., Li, Z., & Tao, W.-Q. (2020) · doi:10.1016/j.ijheatmasstransfer.2020.120034 · Cited by 22
Metadata
- Authors
- Wang, C.-C., Lee, C.-J., Chang, C.-T., & Lin, S.-P.
- Affiliations
- Industrial Technology Research Institute (TW)
- Yuan Ze University (TW)
- Corresponding author
- Wang, C.-C.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 1999-06
- Volume
- 42
- Issue
- 11
- Pages
- 1945-1956
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2004327662
- Cited by
- 265
- References
- 0
- Citations by year
- 2026: 8 · 2025: 10 · 2024: 11 · 2023: 11 · 2022: 9 · 2021: 5 · 2020: 12 · 2019: 19 · 2018: 15 · 2017: 14 · 2016: 19 · 2015: 16 · 2014: 17 · 2013: 10 · 2012: 28
- FWCI
- 12.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Heat and Mass Transfer (publishedVersion)
- Funders
- Industrial Technology Research Institute
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer Mechanisms
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Boiling Studies
- Keywords
- louvered fins, finned tube heat exchanger, heat transfer correlations, friction factor correlation, round tubes, fin spacing, tube pitch, compact heat exchangers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
