Utilization of fly ash by pelletization process; theory, application areas and research results
Open accessThe DOI matches its Crossref record.
Abstract
Although pelletization process is a world wide known technique in the production of artificial aggregates, it has not been widely used in construction sector. The 1985 figures show that overall pellet production for use as metallurgical product was 435 million tons and with respect to statistical figures that belong to 1989 the agglomerated product use in construction sector as lightweight aggregate was only 1.2 million tons. The reasons of low utilization of coal combustion by-products as lightweight aggregates in the construction sector are: — the availability of natural resource products and relatively higher costs of agglomeration process due to initial investments and — energy requiring curing procedures to obtain adequate strength for construction applications (e.g. steam curing and sintering). However, depending on the agglomerated materials’ properties and process efficiency, artificial aggregates with adequate engineering performance may be produced by moisture treatment under atmospheric conditions. In this study, the engineering performance of moist cured fly ash pellets including the effect of lime and cement additions both for geotechnical application and concrete production purposes were investigated and the results obtained are quite satisfactory for the related design requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Self-compacting concrete strength prediction using surrogate models
Asteris, P. G., & Kolovos, K. G. (2019) · Neural Computing and Applications · doi:10.1007/s00521-017-3007-7 · Cited by 265
Production of lightweight aggregate from industrial waste and carbon dioxide
Gunning, P. J., Hills, C. D., & Carey, P. J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.021 · Cited by 133
“The pelletising process is controlled by the physio-chemical properties of the input powder, the moisture content of the feed and process parameters such as rotation speed (Wang and Cameron, 2002; Iveson et al., 2001; Baykal and Doven, 2000).”
Method
Metadata
- Authors
- Baykal, G., & Döven, A. G.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2000-07
- Volume
- 30
- Issue
- 1
- Pages
- 59-77
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2043688290
- Cited by
- 256
- References
- 0
- FWCI
- 5.82
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Utilization of fly ash by pelletization process; theory, application areas and research results. https://app.cochat.ai/papers/10.1016/s0921-3449(00)00042-2
- The paper
- Baykal, G., & Döven, A. G. (2000). Utilization of fly ash by pelletization process; theory, application areas and research results. Resources, Conservation and Recycling. https://doi.org/10.1016/s0921-3449(00)00042-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.