The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Characterization of aluminum based functionally graded composites developed via friction stir processing
Abstract
Abstract Al/SiC functionally graded material (FGM) was developed through a novel multi-step friction stir processing (FSP) method. SiC particles with a mean size of 27.5 μm were embedded in the groove on the 6082-Al plate. To create a graded structure over a predefined value, FSP was carried out with three tools with different pin lengths and with varying volume fractions of SiC particles. The structure was formed by passing tools with 1−3 passes with a constant rotational and traveling speeds of 900 r/min and 20 mm/min, respectively. The experiments were conducted at room temperature. Microstructural features of functionally graded (FG) samples were examined by using scanning electron microscopy (SEM) and 3D light microscopy. Mechanical properties in terms of wear resistance and microhardness were thoroughly assessed. The results indicate that the increase in FSP pass number causes more uniform SiC particle dispersion. The microhardness values were impacted by the number of passes and improved by 51.54% for Pass 3 when compared to as-received 6082-Al. Wear resistance of Al/SiC FG samples was found to increase as a result of the addition of SiC particles.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, the occurrence of defects at high speed ratio, despite the high heat input, is due to the excessive turbulent flow of materials in the stir zone [48][49][50].”
From Theoretical and experimental studies on fabrication of two-layer aluminum−copper pipe by friction stir additive manufacturing (2021) · cites this paper as [49]
Citations
Cites
Contact and Rubbing of Flat Surfaces
Archard, J. F. (1953) · Journal of Applied Physics · doi:10.1063/1.1721448 · Cited by 7,892
Friction stir welding and processing
Mishra, R. S., & Ma, Z. Y. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.07.001 · Cited by 6,753
Friction stir welding and processing
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0901 · Cited by 3,862
Friction Stir Processing Technology: A Review
Ma, Z. Y. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9459-0 · Cited by 1,206
Friction stir processing: a novel technique for fabrication of surface composite
Mishra, R. S., Ma, Z. Y., & Charit, I. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00199-5 · Cited by 1,170
Functionally graded materials: A review of fabrication and properties
Naebe, M., & Shirvanimoghaddam, K. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.10.001 · Cited by 986
Functionally Graded Composite Materials: An Overview
Gururaja, U., Rao, S. S., & Gangadharan, K. V. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.442 · Cited by 466
Functionally graded material: an overview
Mahamood, R. M., Akinlabi, E. T., Shukla, M., & Pityana, S. L. (2012) · Research Portal (Queen's University Belfast) · Cited by 332
Barmouz, M., Givi, M. K. B., & Seyfi, J. (2010) · Materials Characterization · doi:10.1016/j.matchar.2010.11.005 · Cited by 313
Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties
Li, L., Sun, Q., Bellehumeur, C. T., & Gu, P. (2002) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(02)70139-4 · Cited by 306
Cited by
Sam, M., Jojith, R., & Radhika, N. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.062 · Cited by 119
Review on developments of bulk functionally graded composite materials
Charan, M. S., Naik, A. K., Kota, N., Laha, T., & Roy, S. (2022) · International Materials Reviews · doi:10.1080/09506608.2022.2026863 · Cited by 89
Mehdi, H., & Mishra, R. S. (2021) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2021.100062 · Cited by 70
Sharma, A., Morisada, Y., & Fujii, H. (2021) · Carbon · doi:10.1016/j.carbon.2021.10.018 · Cited by 45
Ayvaz, S. İ., Arslan, D., & Ayvaz, M. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103419 · Cited by 36
Metadata
- Authors
- BIKKINA, V., TALASILA, S. R., & ADEPU, K.
- Affiliations
- National Institute of Technology Warangal (IN)
- Corresponding author
- BIKKINA, Venkatesh
- Venue
- Transactions of Nonferrous Metals Society of China
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 30
- Issue
- 7
- Pages
- 1743-1755
- ISSN
- 1003-6326 (ISSN-L)
- OpenAlex
- W3048203632
- Cited by
- 34
- References
- 44
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 3 · 2023: 3 · 2022: 10 · 2021: 11
- FWCI
- 2.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Transactions of Nonferrous Metals Society of China (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Aluminum Alloys Composites Properties
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Welding Techniques Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Keywords
- functionally graded materials, aluminum matrix composites, Al-SiC composites, friction stir processing, 6082 aluminum alloy, pin length, number of passes, microhardness, wear resistance, microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of aluminum based functionally graded composites developed via friction stir processing. https://app.cochat.ai/papers/10.1016/s1003-6326(20)65335-3
- The paper
- BIKKINA, V., TALASILA, S. R., & ADEPU, K. (2020). Characterization of aluminum based functionally graded composites developed via friction stir processing. Transactions of Nonferrous Metals Society of China. https://doi.org/10.1016/s1003-6326(20)65335-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
