The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Maximizing the efficiency of a flexible propulsor using experimental optimization
Abstract
Experimental gradient-based optimization is used to maximize the propulsive efficiency of a heaving and pitching flexible panel. Optimum and near-optimum conditions are studied via direct force measurements and particle image velocimetry (PIV). The net thrust and power scale predictably with the frequency and amplitude of the leading edge, but the efficiency shows a complex multimodal response. Optimum pitch and heave motions are found to produce nearly twice the efficiencies of optimum heave-only motions. Efficiency is globally optimized when (i) the Strouhal number is within an optimal range that varies weakly with amplitude and boundary conditions; (ii) the panel is actuated at a resonant frequency of the fluid–panel system; (iii) heave amplitude is tuned such that trailing-edge amplitude is maximized while the flow along the body remains attached; and (iv) the maximum pitch angle and phase lag are chosen so that the effective angle of attack is minimized. The multi-dimensionality and multi-modality of the efficiency response demonstrate that experimental optimization is well-suited for the design of flexible underwater propulsors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flying and swimming animals cruise at a Strouhal number tuned for high power efficiency
Taylor, G. K., Nudds, R. L., & Thomas, A. L. R. (2003) · Nature · doi:10.1038/nature02000 · Cited by 994
Cited by
Phototactic guidance of a tissue-engineered soft-robotic ray
Park, S.-J., Gazzola, M., Park, K. S., Park, S., Di Santo, V., Blevins, E. L., Lind, J. U., Campbell, P. H., Dauth, S., Capulli, A. K., et al. (2016) · Science · doi:10.1126/science.aaf4292 · Cited by 721
Self-citation
Metadata
- Authors
- Quinn, D. B., Lauder, G. V., & Smits, A. J.
- Venue
- Journal of Fluid Mechanics
- Publisher
- Cambridge University Press (CUP)
- Published
- 2015-02-16
- Volume
- 767
- Pages
- 430-448
- ISSN
- 0022-1120 (ISSN-L)
- 1469-7645
- OpenAlex
- W2171543740
- Cited by
- 165
- References
- 1
- FWCI
- 17.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Maximizing the efficiency of a flexible propulsor using experimental optimization. https://app.cochat.ai/papers/10.1017/jfm.2015.35
- The paper
- Quinn, D. B., Lauder, G. V., & Smits, A. J. (2015). Maximizing the efficiency of a flexible propulsor using experimental optimization. Journal of Fluid Mechanics. https://doi.org/10.1017/jfm.2015.35
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.