The wall region in turbulent shear flow

Abstract

Hot-film measurements in a fully developed channel flow have been made in an attempt to gain more insight into the process of Reynolds stress production. The background for this effort is the observation of a certain sequence of events (deceleration, ejection and sweep) in the wall region of turbulent flows by Corino (1965) and Corino & Brodkey (1969). The instantaneous product signal uv was classified according to the sign of its components u and v, and these classified portions were then averaged to obtain their contributions to the Reynolds stress $-\rho\overline{uv} $. The signal was classified into four categories; the two main ones were that with u negative and v positive, which can be associated with the ejection-type motion of Corino & Brodkey (1969), and that with u positive and v negative, associated with the sweep-type motion. It was found that over the wall region investigated, 3·5 [les ] y [les ] 100, these two types of motion give rise to a stress considerably greater than the total Reynolds stress. Two other types of motion, (i) u negative, v negative, corresponding to low-speed fluid deflected towards the wall, and (ii) u positive, v positive, corresponding to high-speed fluid reflected outwards from the wall, were found to account for the ‘excess’ stress produced by the first two categories, which give contributions of opposite sign. The autocorrelations of the classified portions of uv were obtained to determine the relative time scales of these four types of motion. The positive stress producing motions (u < 0, v > 0 and u > 0, v < 0) were found to have significantly larger time scales than the negative stress producing motions (u < 0, v < 0 and u > 0, v > 0). It was further surmised that turbulent energy dissipation is associated with the Reynolds stress producing motions, since these result in localized shear regions in which the dissipation is several orders of magnitude greater than the average dissipation at the wall.