CoChat
Cited by 284

The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.

Direct numerical simulation of turbulent flow over a modeled riblet covered surface

Goldstein, D., Handler, R., Sirovich, L. · 1995 · Journal of Fluid Mechanics

Abstract

An immersed boundary technique is used to model a riblet covered surface on one wall of a channel bounding fully developed turbulent flow. The conjecture that the beneficial drag reduction effect of riblets is a result of the damping of cross-flow velocity fluctuations is then examined. This possibility has been discussed by others but is unverified. The damping effect is explicitly modelled by applying a cross-flow damping force field in elongated streamwise zones with a height and spacing corresponding to the riblet crests. The same trends are observed in the turbulence profiles above both riblet and damped surfaces, thus supporting cross-flow damping as a beneficial mechanism. It is found in the examples presented that the effect of the riblets on the mean flow field quantities (mean velocity profile, velocity fluctuations, Reynolds shear stress, and low–speed sreak spacing) is small. The riblests cause a relatively small drag reduction of about 4%, a figure that is in rough agreement with experiments and other computations. The simulations also suggest a mechanism for the observed displacement of the turbulence quantities away from the wall. The immersed boundary technique used to model the riblets consists of creating an externally imposed spatially localized body force which opposes the flow velocity and creates a riblet-like surface. For unstead viscous flow the calculation of the force is done with a feedback scheme in which the velocity is used to iteratively determine the desired value. In particular, the surface body force is determined by the relationf(xs,t) = α ∫t0U(xs,t′)d t′ + βU(xs,t) for surface pointsxs, velocityUtime t and negative constants α and β. All simulations are done with a spectral code in a single computational domain without any mapping of the mesh. The combination of the immersed boundary and spectral techniques can potentially be used to solve other problems having complex geometry and flow physics.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1017/s0022112095004125

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 284

Metadata

Authors
Goldstein, D., Handler, R., & Sirovich, L.
Venue
Journal of Fluid Mechanics
Published
1995-11-10
Volume
302
Pages
333-376
ISSN
  • 0022-1120 (ISSN-L)
  • 1469-7645
OpenAlex
W2137041556
Cited by
284
References
24
FWCI
2.87
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.