The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Wide Linear-Range Detecting Nonenzymatic Glucose Biosensor Based on CuO Nanoparticles Inkjet-Printed on Electrodes
Abstract
Inkjet-printed copper oxide nanoparticles (CuO NPs) on silver electrodes were used to fabricate the nonenzymatic glucose biosensor. The inkjet-printed CuO NPs electrodes produced high and reproducible sensitivity of 2762.5 μAm M(-1) cm(-2) at an applied potential of +0.60 V with the wide linear-detecting range of 0.05-18.45 mM and the detection limit of ~0.5 μM (S/N = 3). The long-term stability and reproducibility of sensor in glucose electro-oxidation resulted from the chemical stability of CuO NPs and pore-like structure formed on Ag surface, which prevented the CuO NPs from conglomeration and the interference of oxygen in the air. Significantly, the effect of interfering species, such as AA, UA, and DA were negligible, whereas sugar derivatives (lactose, fructose, and mannose) show insignificant interference. Finally, the electrode was applied to analyze glucose concentration in human serum samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Glucose Biosensors
Wang, J. (2008) · Chemical Reviews · doi:10.1021/cr068123a · Cited by 3,498
Cited by
A review of recent advances in nonenzymatic glucose sensors
Tian, K., Prestgard, M., & Tiwari, A. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.04.013 · Cited by 546
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Synthesis and Biomedical Applications of Copper Oxide Nanoparticles: An Expanding Horizon
Verma, N., & Kumar, N. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01092 · Cited by 402
Metal oxide nanostructures for sensor applications
Nunes, D., Pimentel, A., Gonçalves, A., Pereira, S., Branquinho, R., Barquinha, P., Fortunato, E., & Martins, R. (2019) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ab011e · Cited by 354
Metal oxide based non-enzymatic electrochemical sensors for glucose detection
Dong, Q., Ryu, H., & Lei, Y. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.137744 · Cited by 338
Metadata
- Authors
- Ahmad, R., Vaseem, M., Tripathy, N., & Hahn, Y.-B.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-10
- Volume
- 85
- Issue
- 21
- Pages
- 10448-10454
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2323435451
- Cited by
- 206
- References
- 1
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.