Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 161

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Toward Practical Solid-State Lithium–Sulfur Batteries: Challenges and Perspectives

Ohno, Saneyuki, Zeier, Wolfgang G. · 2021 · Accounts of Materials Research

Abstract

Conspectus The energy density of the ubiquitous lithium-ion batteries is rapidly approaching its theoretical limit. To go beyond, a promising strategy is the replacement of conventional intercalation-type materials with conversion-type materials possessing substantially higher capacities. Among the conversion-type cathode materials, sulfur constitutes a cost-effective and earth-abundant element with a high theoretical capacity that has a potential to be game-changing, especially within an emerging solid-state battery configuration. Employment of nonflammable solid electrolytes that improves battery safety and boosts the energy density, as lithium metal anodes are also viable. The long-standing inherent problem of conventional lithium–sulfur batteries, arising from the reaction intermediates dissolved in liquid electrolytes, can be eliminated with inorganic solid ion conductors. In particular, the highly conducting and easily processable lithium-thiophosphates have successfully enabled the lab-scale solid-state lithium–sulfur cells to achieve close-to-theoretical capacities. For applications requiring safe, energy-dense, lightweight batteries, solid-state lithium–sulfur batteries are an ideal choice that could surpass conventional lithium-ion batteries. Nevertheless, there are challenges specific to practical solid-state lithium–sulfur batteries, beyond the typical challenges inherent to solid-state batteries in general. While the conversion reaction of sulfur realizes a large specific capacity, the associated significant total volume changes of the active material results in contact losses among the cathode components and, consequently, decreases reversible capacity. Additionally, the ionically and electronically insulating active material requires composite formation with solid electrolytes and electron-conductive additives to secure sufficient ion and electron supply at a triple-phase boundary. However, the compositing process itself makes the carrier transport pathways very tortuous and requires the balancing of carrier transport and optimization of the attainable energy density. Lastly, the requirement of a high interfacial area to establish sufficient triple-phase boundaries promotes the degradation of the solid electrolytes, and the formation of less-conductive interphases further deteriorates the transport in the composites. This Account focuses on the challenges associated with developing practical solid-state lithium–sulfur batteries and provides an overview over recently developed concepts to tackle these critical challenges: (1) Introduction of the conversion efficiency to enable quantitative assessments of the impact of chemo-mechanical failure. (2) For long-term cycling, the electrolyte degradation at the interface and the electrochemical activity of the formed interphases come into play. Practical stability tests with increased interfacial areas and subsequently altered reversal potentials can quantify the magnitude of the electrolyte degradation and confirm influences of reversible redox activity of the interphases. (3) Monitoring the effective conductivity in the composites clarifies correlations between transport and cyclability, further highlighting the need of quantitative measurements to address the composite carrier transport. (4) Impedance spectroscopy combined with transmission-line model analysis as a function of applied potentials can visualize the stability window of good effective ion transport to utilize both the capacity contributions from redox-active interphases and the high ionic conductivity. In the end, a roadmap toward the practical solid-state lithium–sulfur batteries will be presented.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/accountsmr.1c00116

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 161

Metadata

Authors
Ohno, S., & Zeier, W. G.
Venue
Accounts of Materials Research
Published
2021-10-04
Volume
2
Issue
10
Pages
869-880
ISSN
2643-6728 (ISSN-L)
OpenAlex
W3205935506
Cited by
161
References
2
FWCI
5.18
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Toward Practical Solid-State Lithium–Sulfur Batteries: Challenges and Perspectives. https://app.cochat.ai/papers/10.1021/accountsmr.1c00116
The paper
Ohno, S., & Zeier, W. G. (2021). Toward Practical Solid-State Lithium–Sulfur Batteries: Challenges and Perspectives. Accounts of Materials Research. https://doi.org/10.1021/accountsmr.1c00116

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.