The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Surface Properties of CH3NH3PbI3 for Perovskite Solar Cells
Abstract
Perovskite solar cells (PSCs) have attracted considerable interest because of their high potential for solar energy conversion. Power conversion efficiencies of the PSCs have rapidly increased from 3.8 to over 20% only in the past few years. PSCs have several similarities to dye-sensitized solar cells in their device compositions; mesoporous TiO2 (mp-TiO2) is sensitized by light-absorbing components and placed into a medium containing hole transporting materials (HTMs). On the other hand, the perovskite materials for the light-harvesting, for example, CH3NH3PbI3 (MAPbI3), have a greater advantage for the photovoltaic applications; extremely long photocarrier diffusion lengths (over 1 μm) enable carrier transports without singnificant loss. In this respect, the surface states, that can be possible recombination centers, are also of great importance. Availability of solution processes is another important aspect in terms of low cost fabrication of PSCs. Two-step methods, where PbI2 is first introduced from solution onto a mp-TiO2 film and subsequently transformed into the MAPbI3 by the exposition of a solution containing MAI, suggest that use of such a high PbI2 concentration is crucial to obtain higher performance. The experiments also indicate that the PbI2-rich growth condition modifies TiO2/ or HTM/MAPbI3 interfaces in such a way that the photocarrier transport is improved. Thus, the characteristics of surfaces and interfaces play key roles in the high efficiencies of the PSCs. In this Account, we focus on the structural stability and electronic states of the representative (110), (001), (100), and (101) surfaces of tetragonal MAPbI3, which can be regarded as reasonable model HTM/MAPbI3 interfaces, by use of first-principles calculations. By examining various types of PbIx polyhedron terminations, we found that there are two major phases on all of the four surface facets. They can be classified as vacant- and flat-type terminations, and the former is more stable than the latter under thermodynamically equilibrium conditions. More interestingly, both terminations can coexist especially on the more probable (110) and (001) surfaces. Electronic states, that is, projected density of states, of the stable-vacant and PbI2-rich-flat terminations on the two surfaces are almost the same as that in bulk MAPbI3. These surfaces can contribute to the long carrier lifetime actually observed for the PSCs because they have no midgap surface states. Furthermore, the shallow surface states on the (110) and (001) flat terminations can be efficient intermediates for hole transport to HTMs. Consequently, the formation of the flat terminations under the PbI2-rich condition will be beneficial for the improvement of PSC performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Lanzetta, L., Webb, T., Zibouche, N., Liang, X., Ding, D., Min, G., Westbrook, R. J. E., Gaggio, B., Macdonald, T. J., Islam, M. S., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-22864-z · Cited by 516
The surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Ye, J., Byranvand, M. M., Martínez, C. O., Hoye, R. L. Z., Saliba, M., & Polavarapu, L. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102360 · Cited by 389
Metadata
- Authors
- Haruyama, J., Sodeyama, K., Han, L., & Tateyama, Y.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-22
- Volume
- 49
- Issue
- 3
- Pages
- 554-561
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2321342279
- Cited by
- 176
- References
- 1
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface Properties of CH3NH3PbI3 for Perovskite Solar Cells. https://app.cochat.ai/papers/10.1021/acs.accounts.5b00452
- The paper
- Haruyama, J., Sodeyama, K., Han, L., & Tateyama, Y. (2016). Surface Properties of CH3NH3PbI3 for Perovskite Solar Cells. Accounts of Chemical Research. https://doi.org/10.1021/acs.accounts.5b00452
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.