The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
From Fullerene–Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control
Abstract
Conspectus All-polymer solar cells (all-PSCs), consisting of conjugated polymers as both electron donor (P D ) and acceptor (P A ), have recently attracted great attention. Remarkable progress has been achieved during the past few years, with power conversion efficiencies (PCEs) now approaching 8%. In this Account, we first discuss the major advantages of all-PSCs over fullerene–polymer solar cells (fullerene-PSCs): (i) high light absorption and chemical tunability of P A, which affords simultaneous enhancement of both the short-circuit current density ( J SC ) and the open-circuit voltage ( V OC ), and (ii) superior long-term stability (in particular, thermal and mechanical stability) of all-PSCs due to entangled long P A chains. In the second part of this Account, we discuss the device operation mechanism of all-PSCs and recognize the major challenges that need to be addressed in optimizing the performance of all-PSCs. The major difference between all-PSCs and fullerene-PSCs originates from the molecular structures and interactions, i.e., the electron transport ability in all-PSCs is significantly affected by the packing geometry of two-dimensional P A chains relative to the electrodes (e.g., face-on or edge-on orientation), whereas spherically shaped fullerene acceptors can facilitate isotropic electron transport properties in fullerene-PSCs. Moreover, the crystalline packing structures of P D and P A at the P D –P A interface greatly affect their free charge carrier generation efficiencies. The design of P A polymers (e.g., main backbone, side chain, and molecular weight) should therefore take account of optimizing three major aspects in all-PSCs: (1) the electron transport ability of P A, (2) the molecular packing structure and orientation of P A, and (3) the blend morphology. First, control of the backbone and side-chain structures, as well as the molecular weight, is critical for generating strong intermolecular assembly of P A and its network, thus enabling high electron transport ability of P A comparable to that of fullerenes. Second, the molecular orientation of anisotropically structured P A should be favorably controlled in order to achieve efficient charge transport as well as charge transfer at the P D –P A interface. For instance, face-to-face stacking between P D and P A at the interface is desired for efficient free charge carrier generation because misoriented chains often cause an additional energy barrier for overcoming the binding energy of the charge transfer state. Third, large-scale phase separation often occurs in all-PSCs because of the significantly reduced entropic contribution by two macromolecular chains of P D and P A that energetically disfavors mixing. In this Account, we review the recent progress toward overcoming each recognized challenge and intend to provide guidelines for the future design of P A . We believe that by optimization of the parameters discussed above the PCE values of all-PSCs will surpass the 10% level in the near future and that all-PSCs are promising candidates for the successful realization of flexible and portable power generators.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Zhao, W., Qian, D., Zhang, S., Li, S., Inganäs, O., Gao, F., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201600281 · Cited by 1,868
Single-junction polymer solar cells with high efficiency and photovoltage
He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., & Cao, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.6 · Cited by 1,675
Stability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Non-Fullerene Electron Acceptors for Use in Organic Solar Cells
Nielsen, C. B., Holliday, S., Chen, H.-Y., Cryer, S. J., & McCulloch, I. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00199 · Cited by 1,184
Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
Chen, J., Cui, C., Li, Y., Zhou, L., Ou, Q., Li, C., Li, Y., & Tang, J. (2015) · Advanced Materials · doi:10.1002/adma.201404535 · Cited by 1,063
Perylene Imides for Organic Photovoltaics: Yesterday, Today, and Tomorrow
Li, C., & Wonneberger, H. (2012) · Advanced Materials · doi:10.1002/adma.201104447 · Cited by 922
Flexible, highly efficient all-polymer solar cells
Kim, T., Kim, J.-H., Kang, T. E., Lee, C., Kang, H., Shin, M., Wang, C., Ma, B., Jeong, U., Kim, T.-S., et al. (2015) · Nature Communications · doi:10.1038/ncomms9547 · Cited by 861
Self-citation
Cited by
Organic solar cells based on non-fullerene acceptors
Hou, J., Inganäs, O., Friend, R. H., & Gao, F. (2018) · Nature Materials · doi:10.1038/nmat5063 · Cited by 2,861
Non-fullerene acceptors for organic solar cells
Yan, C., Barlow, S., Wang, Z., Yan, H., Jen, A. K.-Y., Marder, S. R., & Zhan, X. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.3 · Cited by 2,710
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
Zhang, G., Zhao, J., Chow, P. C. Y., Jiang, K., Zhang, J., Zhu, Z., Zhang, J., Huang, F., & Yan, H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00535 · Cited by 1,661
Cheng, C., He, B., Fan, J., Cheng, B., Cao, S., & Yu, J. (2021) · Advanced Materials · doi:10.1002/adma.202100317 · Cited by 888
Recent progress in organic solar cells (Part I material science)
Liu, Y., Liu, B., Ma, C.-Q., Huang, F., Feng, G., Chen, H., Hou, J., Yan, L., Wei, Q., Luo, Q., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1180-6 · Cited by 613
Wang, C., & Li, Z. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00201g · Cited by 599
Kim, M., Ryu, S. U., Park, S. A., Choi, K., Kim, T., Chung, D., & Park, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904545 · Cited by 456
Self-citationLuo, Z., Liu, T., Ma, R., Xiao, Y., Zhan, L., Zhang, G., Sun, H., Ni, F., Chai, G., Wang, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202005942 · Cited by 410
Jia, T., Zhang, J., Zhong, W., Liang, Y., Zhang, K., Dong, S., Ying, L., Liu, F., Wang, X., Huang, F., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104718 · Cited by 350
The Bulk Heterojunction in Organic Photovoltaic, Photodetector, and Photocatalytic Applications
Wadsworth, A., Hamid, Z., Kosco, J., Gasparini, N., & McCulloch, I. (2020) · Advanced Materials · doi:10.1002/adma.202001763 · Cited by 332
Wang, W., Wu, Q., Sun, R., Guo, J., Wu, Y., Shi, M., Yang, W., Li, H., & Min, J. (2020) · Joule · doi:10.1016/j.joule.2020.03.019 · Cited by 326
Zhu, L., Zhang, M., Zhong, W., Leng, S., Zhou, G., Zou, Y., Su, X., Ding, H., Gu, P., Liu, F., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01220g · Cited by 275
Recent Progress in Chlorinated Organic Photovoltaic Materials
Yao, H., Wang, J., Xu, Y., Zhang, S., & Hou, J. (2020) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00009 · Cited by 274
Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells
Genene, Z., Mammo, W., Wang, E., & Andersson, M. R. (2019) · Advanced Materials · doi:10.1002/adma.201807275 · Cited by 256
Low Energy Loss of 0.57 eV and High Efficiency of 8.80% in Porphyrin-Based BHJ Solar Cells
Vartanian, M., Singhal, R., de la Cruz, P., Biswas, S., Sharma, G. D., & Langa, F. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00024 · Cited by 19
Metadata
- Authors
- Kang, H., Lee, W., Oh, J., Kim, T., Lee, C., & Kim, B. J.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-10-18
- Volume
- 49
- Issue
- 11
- Pages
- 2424-2434
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2534888907
- Cited by
- 442
- References
- 38
- FWCI
- 35.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.