Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 187

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Sample Preparation Using Molecularly Imprinted Polymers

Pichon, Valérie, Delaunay, Nathalie, Combès, Audrey · 2020 · Analytical Chemistry

Abstract

Despite the advances in the development of new instruments and highly sensitive analytical methods based on gas, liquid or supercritical fluid chromatography coupled to various detectors including high resolution mass spectrometry that can be associated with different ionization sources, a pre-treatment is usually necessary in order to extract and isolate the analytes of interest from complex samples before their determination. Solid-phase extraction (SPE) is routinely used for the extraction or purification of compounds from liquid samples or solid matrix extracts. Despite their attractive features, the classical SPE sorbents retain analytes by non-selective hydrophobic or polar interactions that lead to partial co-extraction of interfering substances that may cause matrix effects even with a specific detector such as a mass spectrometer. To enhance the extraction selectivity of the target analytes, new materials involving a mechanism of molecular recognition were developed. They include immunosorbents or oligosorbents based on the use of immobilized antibodies or aptamers, respectively. Nevertheless, the development of an immunosorbent is time-consuming and relatively expensive and despite their high potential, a limited number of aptamer sequences is, to date, available. An alternative is to develop molecularly imprinted polymers (MIPs). These sorbents are synthetic polymeric materials possessing specific cavities designed for a template molecule involving a retention mechanism based on molecular recognition. The MIPs have been already successfully used in several fields, such as sensors, biomimetic catalyst in organic synthesis, drug delivery, and separation of structural analogs or enantiomers in liquid chromatography and capillary electrophoresis. The use of MIPs as selective sorbents for sample pretreatment was described for the first time by Sellergren and co-workers in 1994 and concerned the development of a MIP for the solid-phase extraction of pentamidine from urine, there has been a growing interest in these polymers for extraction purposes. Initially mainly developed for the selective recognition of small molecules, such as drugs, pesticides or other environmental pollutants, they are now developed, as illustrated in recent reviews, for the recognition of proteins or even microorganisms. While the nature of the targets for which MIPs have been developed has evolved, so has the format of the extraction devices. Indeed, although MIPs have been mainly applied to the selective extraction or cleaning of target analytes from various complex samples by introducing them in a cartridge to carry out off-line SPEs, a strong trend towards miniaturized extraction devices has been observed over the past decade. The tendency is to develop new synthesis pathways to obtain particles of controlled sizes, fibers, stir-bars or membranes thus allowing their use in dispersive SPE, solid-phase microextraction or stir bar sorptive extraction. This change of format is not only a reduction in size, but also implies changing the polymerization modes, which, despite the small size of the devices, must make it possible to maintain sufficient binding capacity. The modification of the polymerization conditions is also required when developing MIPs for proteins because of their lack of stability in conventional polymerization solvents. Based on the works published over the past two years for numerous target molecules, this paper aims to review the new strategies of development of MIPs in different formats dedicated to various extraction methods often treated independently in the previously mentioned reviews, for both small organic molecules and proteins for which there are high expectations for replacing antibodies.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.analchem.9b04816

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

See all 187

Metadata

Authors
Pichon, V., Delaunay, N., & Combès, A.
Venue
Analytical Chemistry
Published
2019-11-07
Volume
92
Issue
1
Pages
16-33
ISSN
  • 0003-2700 (ISSN-L)
  • 1520-6882
OpenAlex
W2984608543
Cited by
187
References
1
FWCI
13.47
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Sample Preparation Using Molecularly Imprinted Polymers. https://app.cochat.ai/papers/10.1021/acs.analchem.9b04816
The paper
Pichon, V., Delaunay, N., & Combès, A. (2020). Sample Preparation Using Molecularly Imprinted Polymers. Analytical Chemistry. https://doi.org/10.1021/acs.analchem.9b04816

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.