Functional Groups and Pore Size Distribution Do Matter to Hierarchically Porous Carbons as High-Rate-Performance Supercapacitors
The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Abstract
A series of nitrogen and oxygen enriched porous carbons are prepared from poly- N -phenylethanolamine (PNPEA) and polyaniline (PANI) conducting polymers through pyrolysis, chemical activation, and oxidation processes. Ar or N 2 -adsorption, Fourier transform infrared, and X-ray photoelectron spectroscopy are used to characterize the surface areas, pore volumes, surface chemical compositions, and oxygen and nitrogen content. Mikhail and Brunauer micropore analytical method (MP method) is successfully used to analyze the micropore size distribution of the samples. The electrochemical behavior of the samples is studied in two- and three-electrode cells. The contribution of pseudocapacitance is confirmed by cyclic voltammetry and galvanostatic tests performed in acidic (H 2 SO 4 ) and basic (KOH) media. The potential drop and the equivalent series resistance value certify that the samples with wide micropore size distribution possess low interface resistances. A sample with a Brunauer–Emmett–Teller (BET) surface area of 760 m 2 g –1, nitrogen content of 3.02 at. %, oxygen content of 16.65 at. %, and a wide micropore size distribution presents the best performance, reaching a value of 370 F g –1 at 0.5 A g –1 and 248 F g –1 at 30 A g –1, and maintaining capacitance retention ration of 96% at 1 A g –1 (over 1000 cycles) and 92% at 30 A g –1 (over 10 000 cycles), respectively. The results obtained for all the samples agree with correlation among capacitance, functional group, and porosity, which indicates that an appropriate selection of the surface chemistry, a reasonable pore size distribution, and a moderate BET surface area may be promising to achieve high-rate-performance supercapacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
Carbon-Based Supercapacitors Produced by Activation of Graphene
Zhu, Y., Murali, S., Stoller, M. D., Ganesh, K. J., Cai, W., Ferreira, P. J., Pirkle, A., Wallace, R. M., Cychosz, K. A., Thommes, M., et al. (2011) · Science · doi:10.1126/science.1200770 · Cited by 6,140
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Carbon materials for supercapacitor application
Frackowiak, E. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b618139m · Cited by 2,042
Hulicova‐Jurcakova, D., Seredych, M., Lu, G. Q., & Bandosz, T. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801236 · Cited by 1,672
3D carbon based nanostructures for advanced supercapacitors
Jiang, H., Lee, P. S., & Li, C. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23284g · Cited by 1,511
Synthesis of functionalized 3D hierarchical porous carbon for high-performance supercapacitors
Qie, L., Chen, W., Xu, H., Xiong, X., Jiang, Y., Zou, F., Hu, X., Xin, Y., Zhang, Z., & Huang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41638k · Cited by 1,147
Wu, Z.-S., Sun, Y., Tan, Y.-Z., Yang, S., Feng, X., & Müllen, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308676h · Cited by 1,098
Li, Z., Xu, Z., Tan, X., Wang, H., Holt, C. M. B., Stephenson, T., Olsen, B. C., & Mitlin, D. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23599d · Cited by 1,054
Nitrogen-containing microporous carbon nanospheres with improved capacitive properties
Su, F., Poh, C. K., Chen, J. S., Xu, G., Wang, D., Li, Q., Lin, J., & Lou, X. W. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00277a · Cited by 916
Cited by
Revitalizing carbon supercapacitor electrodes with hierarchical porous structures
Liu, T., Zhang, F., Song, Y., & Li, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05646j · Cited by 621
Materials Design and System Construction for Conventional and New‐Concept Supercapacitors
Wu, Z., Li, L., Yan, J., & Zhang, X. (2017) · Advanced Science · doi:10.1002/advs.201600382 · Cited by 470
Gao, S., Li, X., Li, L., & Wei, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.045 · Cited by 400
Self-citationKorkmaz, S., & Kariper, İ. A. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101038 · Cited by 399
Biomass-derived carbon electrode materials for supercapacitors
Lu, H., & Zhao, X. S. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00099e · Cited by 396
Future Perspectives and Review on Organic Carbon Dots in Electronic Applications
Semeniuk, M., Yi, Z., Poursorkhabi, V., Tjong, J., Jaffer, S., Lu, Z.-H., & Sain, M. (2019) · ACS Nano · doi:10.1021/acsnano.9b00688 · Cited by 367
Biomass-derived porous carbon materials: synthesis, designing, and applications for supercapacitors
Sun, L., Gong, Y., Li, D., & Pan, C. (2022) · Green Chemistry · doi:10.1039/d2gc00099g · Cited by 324
Manasa, P., Sambasivam, S., & Ran, F. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105290 · Cited by 299
Hoang, V. C., Dave, K., & Gomes, V. G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104093 · Cited by 297
Multiscale Pore Network Boosts Capacitance of Carbon Electrodes for Ultrafast Charging
Zhang, F., Liu, T., Li, M., Yu, M., Luo, Y., Tong, Y., & Li, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00533 · Cited by 280
Guo, N., Li, M., Wang, Y., Sun, X., Wang, F., & Yang, R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11162 · Cited by 269
Wei, J., Ding, C., Zhang, P., Ding, H., Niu, X., Ma, Y., Li, C., Wang, Y., & Xiong, H. (2019) · Advanced Materials · doi:10.1002/adma.201806197 · Cited by 256
Self-citation
Metadata
- Authors
- Wei, X., Jiang, X., Wei, J., & Gao, S.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-12
- Volume
- 28
- Issue
- 2
- Pages
- 445-458
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2377773960
- Cited by
- 276
- References
- 71
- FWCI
- 9.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.