The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Understanding Hydrothermally Reduced Graphene Oxide Hydrogels: From Reaction Products to Hydrogel Properties
Abstract
We studied the chemical processes that take place during hydrothermal gelation of graphene oxide (GO), quantifying the reaction products generated during hydrothermal reduction. The gelation proceeds with disproportionation of GO yielding a large amount of CO 2 (about a quarter of the original mass of GO), organic acidic fragments, and CO. The CO 2 that is formed is trapped in the hydrogel creating macroscopic voids which can lead to cracking of the hydrogel during compression. We were able to quantify the amount of CO 2 produced in situ by adding ammonia during the synthesis, and converting CO 2 into ionic carbonate species that we could easily quantify by titration. We used titration to evaluate the formation of organic acidic fragments too and evaluated the amount of H 2 O and CO produced by thermogravimetric analysis and mass balance. The conversion of CO 2 into ionic species allowed us to produce void-free hydrogels which remain structurally stable after extensive compression. However, such hydrogels on average showed lower mechanical strength and electrical conductivity than the hydrogels with voids. This is a result of the difference in chemistry and morphology between hydrogels reduced under acidic pH and basic pH. Our work provides for the first time a clear quantitative estimate of CO 2 evolution and organic fragment formation during hydrothermal reduction of GO, an overall picture of the reaction products, and a deepened understanding of the conditions that can be used to prepare stronger and more conductive graphene hydrogels and aerogels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Cited by
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Production and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
Synthesis and characterization of sulfophenyl-functionalized reduced graphene oxide sheets
Ossonon, B. D., & Bélanger, D. (2017) · RSC Advances · doi:10.1039/c6ra28311j · Cited by 496
Lv, H., Guo, Y., Yang, Z., Cheng, Y., Wang, L. P., Zhang, B., Zhao, Y., Xu, Z. J., & Ji, G. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc03026b · Cited by 358
Three-dimensional graphene supported catalysts for organic dyes degradation
He, K., Chen, G., Zeng, G., Chen, A., Huang, Z., Shi, J., Huang, T., Peng, M., & Hu, L. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.01.061 · Cited by 341
Metadata
- Authors
- Hu, K., Xie, X., Szkopek, T., & Cerruti, M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-03
- Volume
- 28
- Issue
- 6
- Pages
- 1756-1768
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2273640436
- Cited by
- 159
- References
- 1
- FWCI
- 9.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.