The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Structure and Dopant Engineering in PEDOT Thin Films: Practical Tools for a Dramatic Conductivity Enhancement
Abstract
Poly(3,4-ethylenedioxythiophene) (PEDOT) is certainly the most known and most used conductive polymer because it is commercially available and shows great potential for organic electronic, photovoltaic, and thermoelectric applications. Studies dedicated to PEDOT films have led to high conductivity enhancements. However, an exhaustive understanding of the mechanisms governing such enhancement is still lacking, hindered by the semicrystalline nature of the material itself. In this article, we report the development of highly conductive PEDOT films by controlling the crystallization of the PEDOT chains and by a subsequent dopant engineering approach using iron(III) trifluoromethanesulfonate as oxidant, N -methyl pyrrolidone as polymerization rate controller and sulfuric acid as dopant. XRD, HRTEM, Synchrotron GIWAXS analyses and conductivity measurements down to 3 K allowed us to unravel the organization, doping, and transport mechanism of these highly conductive PEDOT materials. N -methyl pyrrolidone promotes bigger crystallites and structure enhancement during polymerization, whereas sulfuric acid treatment allows the replacement of triflate anions by hydrogenosulfate and increases the charge carrier concentration. We finally propose a charge transport model that fully corroborates our experimental observations. These polymers exhibit conductivities up to 5400 S cm –1 and thus show great promise for room temperature thermoelectric applications or ITO alternative for transparent electrodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review
Shi, H., Liu, C., Jiang, Q., & Xu, J. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500017 · Cited by 1,200
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
Fluctuation-induced tunneling conduction in disordered materials
Sheng, P. (1980) · Physical Review B · doi:10.1103/physrevb.21.2180 · Cited by 1,017
Metallic transport in polyaniline
Lee, K., Cho, S., Heum Park, S., Heeger, A. J., Lee, C.-W., & Lee, S.-H. (2006) · Nature · doi:10.1038/nature04705 · Cited by 936
Bubnova, O., Khan, Z. U., Wang, H., Braun, S., Evans, D. R., Fabretto, M., Hojati-Talemi, P., Dagnelund, D., Arlin, J.-B., Geerts, Y. H., et al. (2014) · Nature Materials · doi:10.1038/nmat3824 · Cited by 854
Sun, Y., Sheng, P., Di, C., Jiao, F., Xu, W., Qiu, D., & Zhu, D. (2012) · Advanced Materials · doi:10.1002/adma.201104305 · Cited by 532
Crispin, X., Marciniak, S., Osikowicz, W., Zotti, G., van der Gon, A. W. D., Louwet, F., Fahlman, M., Groenendaal, L., De Schryver, F., & Salaneck, W. R. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10659 · Cited by 525
Morphological Change and Mobility Enhancement in PEDOT:PSS by Adding Co‐solvents
Wei, Q., Mukaida, M., Naitoh, Y., & Ishida, T. (2013) · Advanced Materials · doi:10.1002/adma.201205158 · Cited by 467
Cited by
Gueye, M. N., Carella, A., Faure-Vincent, J., Demadrille, R., & Simonato, J.-P. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100616 · Cited by 682
Self-citationWearable flexible sweat sensors for healthcare monitoring: a review
Chung, M., Fortunato, G., & Radacsi, N. (2019) · Journal of The Royal Society Interface · doi:10.1098/rsif.2019.0217 · Cited by 378
Conductive polymers for thermoelectric power generation
Bharti, M., Singh, A., Samanta, S., & Aswal, D. K. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.09.004 · Cited by 368
Morphology controls the thermoelectric power factor of a doped semiconducting polymer
Patel, S. N., Glaudell, A. M., Peterson, K. A., Thomas, E. M., O’Hara, K. A., Lim, E., & Chabinyc, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1700434 · Cited by 359
Mechanisms for doped PEDOT:PSS electrical conductivity improvement
Shahrim, N. A., Ahmad, Z., Wong Azman, A., Fachmi Buys, Y., & Sarifuddin, N. (2021) · Materials Advances · doi:10.1039/d1ma00290b · Cited by 317
Metadata
- Authors
- Gueye, M. N., Carella, A., Massonnet, N., Yvenou, E., Brenet, S., Faure-Vincent, J., Pouget, S., Rieutord, F., Okuno, H., Benayad, A., Demadrille, R., & Simonato, J.-P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-05-12
- Volume
- 28
- Issue
- 10
- Pages
- 3462-3468
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2343367917
- Cited by
- 262
- References
- 29
- FWCI
- 16.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structure and Dopant Engineering in PEDOT Thin Films: Practical Tools for a Dramatic Conductivity Enhancement. https://app.cochat.ai/papers/10.1021/acs.chemmater.6b01035
- The paper
- Gueye, M. N., Carella, A., Massonnet, N., Yvenou, E., Brenet, S., Faure-Vincent, J., Pouget, S., Rieutord, F., Okuno, H., Benayad, A., Demadrille, R., & Simonato, J.-P. (2016). Structure and Dopant Engineering in PEDOT Thin Films: Practical Tools for a Dramatic Conductivity Enhancement. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.6b01035
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.