The DOI matches its Crossref record.
A High Power–High Energy Na3V2(PO4)2F3 Sodium Cathode: Investigation of Transport Parameters, Rational Design and Realization
Abstract
Sodium ion batteries are realistic and promising alternatives to lithium due to the abundance of Na and the similar intercalation chemistry of Na when compared to the lithium counterpart. Developing high-power and high-energy sodium batteries is still a significant challenge. Na 3 V 2 (PO 4 ) 2 F 3 (NVPF) has been shown to combine excellent charge–discharge kinetics with a competitively high voltage. However, the major issue is, as for the vast majority of electrode materials, the lack of distinct knowledge of fundamental transport parameters, on which an optimized strategy for developing a high-power and high-energy sodium cathode can be based. This work aims at filling this gap. We experimentally investigate the intrinsic ionic and electronic conductivities, as well as the chemical diffusion coefficient of sodium of Na 3 V 2 (PO 4 ) 2 F 3 by impedance and dc polarization. On the basis of these results, we develop an optimized design. As the electronic conductivity is found to be much smaller than the ionic one, electronic wiring of the particles (by a graphene network) has higher priority than providing electrolyte contact. This is important since the contact by graphene and electrolyte wetting is partly antagonistic, not so much because of interfacial tensions rather because of the introduced heterogeneities on the nanoscale (cf. Lotus effect). We develop and apply a one-step cost-effective low temperature hydrothermal method without any postheat treatment for the fabrication of a nanoparticulate (∼30–50 nm) NVPF electrode, which provides sufficient porosity and in which every nanoparticle is connected to the graphene network. In terms of rate capability, the performance of this electrode is excellent and at least belongs to the best Na storage performances reported for Na 3 V 2 (PO 4 ) 2 F 3 so far.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Self-citationVanadium‐Based Nanomaterials: A Promising Family for Emerging Metal‐Ion Batteries
Xu, X., Xiong, F., Meng, J., Wang, X., Niu, C., An, Q., & Mai, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904398 · Cited by 482
Various cell architectures of capacitive deionization: Recent advances and future trends
Tang, W., Liang, J., He, D., Gong, J., Tang, L., Liu, Z., Wang, D., & Zeng, G. (2019) · Water Research · doi:10.1016/j.watres.2018.11.064 · Cited by 461
Chen, M., Liu, Q., Wang, S., Wang, E., Guo, X., & Chou, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803609 · Cited by 341
Xu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Metadata
- Authors
- Zhu, C., Wu, C., Chen, C.-C., Kopold, P., van Aken, P. A., Maier, J., & Yu, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-08
- Volume
- 29
- Issue
- 12
- Pages
- 5207-5215
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2617764634
- Cited by
- 179
- References
- 0
- FWCI
- 9.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A High Power–High Energy Na3V2(PO4)2F3 Sodium Cathode: Investigation of Transport Parameters, Rational Design and Realization. https://app.cochat.ai/papers/10.1021/acs.chemmater.7b00927
- The paper
- Zhu, C., Wu, C., Chen, C.-C., Kopold, P., van Aken, P. A., Maier, J., & Yu, Y. (2017). A High Power–High Energy Na3V2(PO4)2F3 Sodium Cathode: Investigation of Transport Parameters, Rational Design and Realization. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.7b00927
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.