The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Surface Ligand Engineering for Near-Unity Quantum Yield Inorganic Halide Perovskite QDs and High-Performance QLEDs
Abstract
Despite the great potential of all-inorganic CsPbX 3 (X = Br or I) quantum dots (QDs) for light-emitting diodes (QLEDs), their emission properties have been impeded by the long insulating ligands on the QD surface. To address the problem, an efficient surface ligand engineering method has been executed by using a short conjugation molecular ligand phenethylamine (PEA) as ligands to synthesize CsPbX 3 QDs and then treating the CsPbX 3 QD films with phenethylammonium bromide (PEABr) or phenethylammonium iodide (PEAI). The results indicate that the short conjugation molecular ligand is successfully adsorbed on the surface of CsPbX 3 QDs to instead long insulating ligands, resulting in the remarkable enhancement of the carrier injection and transport. The incorporation of phenethylamine (PEA) as synthetic ligand causes the fewer trap states in both CsPbBr 3 and CsPbI 3 QDs, exhibiting the near-unity photoluminescence quantum yields (PLQYs) of 93% and 95%, respectively. The luminance of CsPbBr 3 and CsPbI 3 QLEDs could be improved to 21470 and 1444 cd m –2, respectively, when the long insulating ligands were further replaced with conjugation molecular ligands. Particularly, the external quantum efficiency (EQE) of CsPbI 3 QLEDs reaches 14.08%, which is among the highest efficiency of red perovskite LEDs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Solution-processed, high-performance light-emitting diodes based on quantum dots
Dai, X., Zhang, Z., Jin, Y., Niu, Y., Cao, H., Liang, X., Chen, L., Wang, J., & Peng, X. (2014) · Nature · doi:10.1038/nature13829 · Cited by 2,702
Properties and potential optoelectronic applications of lead halide perovskite nanocrystals
Kovalenko, M. V., Protesescu, L., & Bodnarchuk, M. I. (2017) · Science · doi:10.1126/science.aam7093 · Cited by 2,652
Li, X., Wu, Y., Zhang, S., Cai, B., Gu, Y., Song, J., & Zeng, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600109 · Cited by 2,545
Nedelcu, G., Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Grotevent, M. J., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02404 · Cited by 2,356
Perovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
Genesis, challenges and opportunities for colloidal lead halide perovskite nanocrystals
Akkerman, Q. A., Rainò, G., Kovalenko, M. V., & Manna, L. (2018) · Nature Materials · doi:10.1038/s41563-018-0018-4 · Cited by 2,287
Akkerman, Q. A., D’Innocenzo, V., Accornero, S., Scarpellini, A., Petrozza, A., Prato, M., & Manna, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05602 · Cited by 2,197
Cited by
Rational molecular passivation for high-performance perovskite light-emitting diodes
Xu, W., Hu, Q., Bai, S., Bao, C., Miao, Y., Yuan, Z., Borzda, T., Barker, A. J., Tyukalova, E., Hu, Z., et al. (2019) · Nature Photonics · doi:10.1038/s41566-019-0390-x · Cited by 1,240
Wei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Metal Halide Perovskites for X-ray Imaging Scintillators and Detectors
Zhou, Y., Chen, J., Bakr, O. M., & Mohammed, O. F. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02430 · Cited by 891
Chiral-induced spin selectivity enables a room-temperature spin light-emitting diode
Kim, Y.-H., Zhai, Y., Lu, H., Pan, X., Xiao, C., Gaulding, E. A., Harvey, S. P., Berry, J. J., Vardeny, Z. V., Luther, J. M., et al. (2021) · Science · doi:10.1126/science.abf5291 · Cited by 783
Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction
Wu, H., Li, X., Tung, C., & Wu, L. (2019) · Advanced Materials · doi:10.1002/adma.201900709 · Cited by 486
Metal Halide Perovskite Light‐Emitting Devices: Promising Technology for Next‐Generation Displays
Lu, M., Zhang, Y., Wang, S., Guo, J., Yu, W. W., & Rogach, A. L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902008 · Cited by 425
The surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Ye, J., Byranvand, M. M., Martínez, C. O., Hoye, R. L. Z., Saliba, M., & Polavarapu, L. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102360 · Cited by 389
Dutta, A., Behera, R. K., Pal, P., Baitalik, S., & Pradhan, N. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900374 · Cited by 361
Lead‐Free Halide Perovskites for Light Emission: Recent Advances and Perspectives
Li, X., Gao, X., Zhang, X., Shen, X., Lu, M., Wu, J., Shi, Z., Colvin, V. L., Hu, J., Bai, X., et al. (2021) · Advanced Science · doi:10.1002/advs.202003334 · Cited by 337
Bi, C., Yao, Z., Sun, X., Wei, X., Wang, J., & Tian, J. (2021) · Advanced Materials · doi:10.1002/adma.202006722 · Cited by 333
Tackling the Defects, Stability, and Photoluminescence of CsPbX3 Perovskite Nanocrystals
Seth, S., Ahmed, T., De, A., & Samanta, A. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00849 · Cited by 323
Short‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., & Zhang, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900991 · Cited by 302
Recent advances in quantum dots photocatalysts
Sun, P., Xing, Z., Li, Z., & Zhou, W. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141399 · Cited by 254
Passivation strategies for mitigating defect challenges in halide perovskite light-emitting diodes
Shen, X., Kang, K., Yu, Z., Jeong, W. H., Choi, H., Park, S. H., Stranks, S. D., Snaith, H. J., Friend, R. H., & Lee, B. R. (2023) · Joule · doi:10.1016/j.joule.2023.01.008 · Cited by 197
Metadata
- Authors
- Li, G., Huang, J., Zhu, H., Li, Y., Tang, J.-X., & Jiang, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-21
- Volume
- 30
- Issue
- 17
- Pages
- 6099-6107
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2888054139
- Cited by
- 287
- References
- 57
- FWCI
- 11.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.